• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.123-134
• /
• 2019

The introduction of the world geodetic reference system in cadastral sector can apply the international standardization of cadastral survey and can be the basis for the creation of new industries by merging with other industries based on spatial information. With the introduction of the world geodetic reference system, non-coincidence land may cause problems which are whether the cadastral record and the real estate register are not consistent, etc. This problem infringes on the protection of ownership of citizens suggested in the main purpose of ｢Act On The Establishment, Management, Etc. Of Spatial Data｣. We have analyzed at overlapping cases between private land and overlapping cases between national and public land and suggested institutional improvement measures to solve problems arising on the site. As a result, it will be necessary to introduce a transformation verification measure by the world geodetic reference system in order to assign a function as a cadastral records to mapping converted to the world geodetic reference system. It is also expected that the legal and institutional basis should be established for alert adjustment and positioning through verification measures. Finally, it is difficult to determine the transformation factor as the co-ordinates of common points also differ because survey results vary by work area. Therefore, it is deemed necessary to consider the requirement to use the cadastral measurement basis by the world geodetic reference system in 2021.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.23-31
• /
• 2009

The border of the shorelines in a nation is an important factor in determining the border of a national territory, but Korea's shorelines are rapidly changing due to the recent rise in sea level from global warming and growth-centered economic policy over the decades of years. This research was done centering on the areas having well-preserved shorelines as they naturally are and other areas having damaged shorelines in their vicinities due to artificial structures at the two beaches located at the neighboring areas and having mutually homogeneous ocean conditions with each other. First, this research derived the shorelines using the aerial photographies taken from 1947 until 2007 and revised the tidal levels sounding data obtained from a hydrographical survey automation system consisting of Echosounder[Echotrac 3100] and Differential Global Positioning System[Beacon]by using topographical data and ships on land obtained by applying post-processing Kinematic GPS measuring method. In addition, this research evaluated the changes and dimensional variations for the last 60 years by dividing these determined shorelines into 5 sections. As a result, the Haewundae Beach showed a total of 29% decrease rate in dimension as of the year 2007 in comparison with the year 1947 due to a rapid dimensional decline centering on its west areas, while the dimension of the Gwanganri Beach showed an increase in its dimension amounting to a total of 69% due to the decrease in flow velocity by artificial structures built on both ends of the beach-forming accumulation; thus, it was found that there existed a big difference in deposition & accumulation tendency depending on neighboring environment in spite of the homogeneous ocean conditions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.11-19
• /
• 2016

Recently, global companies are developing the automobile technologies, converged with state-of-the-art IT technologies for the commercialization of autonomous vehicles. These autonomous vehicles are required the accurate lane information to enhance its reliability by controlling the vehicles safely. Hence, the study planned to examine possibilities of applying UAV photogrammetry of high-resolution images, obtained from the low altitudes. The high-resolution DSM and the ortho-images were generated from the GSD 7cm-level digital images that were obtained and based on the generated data, when the positions information of the roads including the lanes were extracted. In fact, the RMSE of verifying the extracted data was shown to be about 15cm. Through the results from the study, it could be concluded that the low alititude UAV photogrammetry can be applied for generating and updating a high-accuracy map of road areas.

• Spatial Information Research
• /
• v.11 no.4
• /
• pp.421-437
• /
• 2003

In order to calculate the position of parcel boundary points, the area of the Parcel, and the length of the parcel boundary lines using a digitalized cadastral map or maps, the distortion of the map has to be corrected. The correction methods, such as the method of 2D affine transformation using 4 comer points of the edge lines, the method of tessellation into 9 subregions, the method of using the original surveying sheets, and the method of straightening the 4 edge lines, have been developed. In this Paper, the four methods were programed and applied to some sample cadastral maps and the correction accuracies were obtained and analysed. No method could prefectly correct the distortions because the distortions were irregular throughout the maps. However, it is found that tile method of straightening the 4 edge lines is the one which can minimize the distortions when the method is applied after applying the 2D projective transformation on the maps using the 4 comer points of the edges.

• Journal of Korea Water Resources Association
• /
• v.45 no.9
• /
• pp.943-957
• /
• 2012

In this study, a technique based on Fractal Theory with Erosion Model was developed to interpolate the river morphology data at the border area between river bed and river side where both surface and under water surveyings can not be committed easily. Three dimensional river morphology data along the Ara River was generated by the developed technique. The Ara River is an artificially constructed waterway for vessels between the Han River and West Sea of Korea. The result was compared with the survey data by RMSE of 0.384, while the IDW interpolation result has RMSE of 0.802. Consequently, the developed river morphology data interpolation technique using Erosion Model based Fractal Theory is conceived to be superior to the IDW which has been generally used in generating the river morphology data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.479-485
• /
• 2011

A number of case studies that find distribution of longevity population and influencing factors through the spatial data fusion using GIS techniques are growing. The majority cases of these studies are adopt census administrative boundary data for the spatial analysis. However, these methods cannot fully explain the phenomenon of longevity because there are a variety of spatial characteristics within the census administrative boundaries. Therefore, studies of spatial unit are required that realistically reflect the phenomenon of human longevity. The dasymetric mapping method enables to product of spatial unit more realistic than census administrative boundary map and statistic estimates of small area utilizing diversity spatial information. In this study, elderly population of small area has been estimated within statistically significant level that applied the vector based dasymetric mapping method. Also, the cluster analysis confirmed that the variation of local spatial relationship within census administrative boundary. The result of this study implied that the need for local-level studies of the human longevity and the validity of the dashmetric mapping techniques.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.27-29
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.415-425
• /
• 2007

In this study, we generated an orthophoto with both LIDAR data and aerial images and compared it with that generated from only the images. For the accuracy assessment of these orthophotos, we performed not only qualitative analysis based on visual inspection but also quantitative analysis by measuring horizontal inconsistency, boundary coordinates and similarity measures on buildings. Based on the visual inspection and horizontal inconsistency, the orthophoto based on LIDAR DSM appeared to be more closer to a true-orthophoto. However, the analysis on measurements of boundary coordinates and similarity measures indicates that the orthophoto based on LIDAR DSM is more vulnerable to double mapping on occluded areas. Accordingly, if we apply an effective solution on double mapping or use only the central areas of the aerial images where occluded areas are rarely founded, we can generate automatically true-orthophotos based on a LIDAR DSM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.303-309
• /
• 2004

In this paper, an adaptive Bayesian approach to image segmentation was developed for boundary detection. Both image intensities and texture information were used for obtaining better quality of the image segmentation by using the C programming language. Fuzzy c-mean clustering was applied fer the conditional probability density function, and Gibbs random field model was used for the prior probability density function. To simply test the algorithm, a synthetic image (256$\times$256) with a set of low gray values (50, 100, 150 and 200) was created and normalized between 0 and 1 n double precision. Results have been presented that demonstrate the effectiveness of the algorithm in segmenting the synthetic image, resulting in more than 99% accuracy when noise characteristics are correctly modeled. The algorithm was applied to the Antarctic mosaic that was generated using 1963 Declassified Intelligence Satellite Photographs. The accuracy of the resulting vector map was estimated about 300-m.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7855-7862
• /
• 2015

Cadastral map information is created by registering parcel information such as location, lot number, land category and boundary through the cadastral survey. However, with regard to boundary point coordinate, computerized cadastral information data was registered to either two decimal places (unit in centimeter) or three decimal places (unit in millimeter) so that a confusion in cadastral administration and cadastral survey has been caused. Therefore, the purpose of this study is to look for a method of matching two different coordinate systems through the consideration of registration of cadastral information data and area calculation. In conclusion, the result of the investigation not only shows that areal change and the creation of minute polygons resulted from land alteration could be solved by changing boundary point coordinate from two decimal places to three decimal places, but also suggests that the related laws and regulations to register boundary point coordinate to three decimal places should be institutionally corrected and applied.