• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.784-793
• /
• 2001

본 논문에서는 이산 여현변환에 기반으로 한 고압축의 복원된 영상으로 발생하는 블록화 현상을 제거하기 위한 개선된 후처리 기법을 제안한다. 먼저 압축으로부터 복원된 영상에 대하여, 변환 블록단위로 계산된 블록 경계 불연속값을 이용하여 블록화현상 블록과 에지블록을 구별한다. 블록화현상 블록은 다시 블록 경계면의 격차 정도에 따라 적응적으로 블록경계에서 필터링되는 화소 범위를 다르게 하여 필터링하며, 에지 블록은 다시 화소단위로 에지화소 여부를 조사하여, 에지가 아닌 화소만 필터링을 취하여 좀 더 세밀하게 블록화 현상을 제거하는 새로운 방법을 제안한다. 실험 결과를 통하여 제안한 방법이 기존 방법에 비해 시각적으로 향상된 영상을 얻을 수 있음을 입증하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.25-30
• /
• 2001

The stress intensity factors for edge cracks located at the bonding interface between the semiconductor chip and the adhesive layer subjected to a uniform transverse tensile strain are investigated. Such cracks might be generated due to a stress singularity in the vicinity of the free surface. The boundary element method (BEM) is employed to investigate the behavior of interface stresses. The amplitude of complex stress intensity factor depends on the crack length, but it has a constant value at large crack lengths. The rapid propagation of interface crack is expected if the transverse tensile strain reaches a critical value.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.309-315
• /
• 2001

The Stress intensity factors for edge cracks located at the bonding interface between the elastic semiconductor chip and the viscoelastic adhesive layer have been investigated. Such cracks might be generated due to stress singularity in the vicinity of the free surface. The domain boundary element method(BEM) has been employed to investigate the behavior of interface stresses. The overall stress intensity factor for the case of a small interfacial edge crack has been computed. The magnitude of stress intensity factors decrease with time due to viscoelastic relaxation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.1
• /
• pp.65-72
• /
• 1992

It is believed that the lower cold water is formed by winter cooling in the north of the East(Japan) Sea. To examine its effect on the general circulation of the East Sea, we performed a two-layer numerical model with realistic bottom topography. First a circulation is generated by imposing only an inflow and an outflow which is then modified by adding the cooling effect in the north. The interface between the two layers rises due to cooling and propagates along the coast as internal Kelvin waves. About 7 months after the cooling starts, all coastal areas of the basin have higher elevation than that in offshore region. This induces baroclinic currents resulting in clockwise(anticlockwise) circulation in upper (lower) layer of the basin. It is concluded that the East Korean Warm Current strengthens as a result of lower cold water formation.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.178-184
• /
• 2002

For economy and convenience, seismic refraction survey is widely used in surveying for large civil engineering work. The purpose of this study is to obtain the numerical responses of various models using Kirchhoff migration, and to analyze its application to the real data processing. Synthetic traveltime curve was calculated by vidale's algorithm, and various models such as 2 or 3 layer model and irregular topography model are tested to simulate the response of real structure. In order to compare the effect of initial velocity model, true velocity models, inversion results by tomography, smooth velocity models are used as an initial guess. The responses of model data show that the algorithm of this study is more sensitive to initial velocity model than the reflection survey, so choosing a suitable initial velocity model will be the most important thing in real data processing.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1622-1624
• /
• 2000

방사선이 조사된 폴리프로필렌의 유전특성을 고찰한 결과 방사선 조사량이 40 kGy이하의 경우에는 유전상수가 서서히 증가하였으나. 40 kGy이상에서는 급격한 증가를 나타냈다. 또한, 방사선이 결정에 미치는 영향은 결정과 결정의 경계면에서 열화현상이 발생하는 것으로 관측되었고, 방사선의 세기가 증가할 수록 열화공의 수도 증가하는 것으로 나타났다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.132-146
• /
• 2000

Seismic refraction survey was performed for 10 lines along NE-SW and NW-SE directions above Nampoong gallery at Makyo-ri, Dogye, Samcheok, Kangwon-do. 48 geophones were laid in line with the interval of 1m, and a 5Kg hammer was used as a source at 5 points for each line. Data processing was done using reciprocal time method, GRM, and traveltime tomography which utilizes wavefront expansion method for forward process and STRT for inversion. The result shows that the first layer has its lower boundary between 3.49m and 8.88m. The P-wave velocity of the first and the second layer were estimated as 270${\~}$360m/s and 1550${\~}$1940m/s respectively. When the boundary of the first and second layer is smooth enough and the velocity difference is large enough, GRM has little advantage over reciprocal time method. The result of reciprocal method and traveltime tomography shows consistency. The northeast part of the boundary has syncline structure, which is similar to the topography above. This implies that the collapse of the cavities of Nampoong gallery result in the subsidence of the ground surface. The subsidence is in progress across the Youngdong railroad, therefore a proper reinforcement work is required.

• Journal of the Speleological Society of Korea
• /
• v.34 no.35
• /
• pp.11-22
• /
• 1993

환선굴은 강원도의 삼척군에 위치하고 있는 천연기념물 동굴로 비공개 상태이다. 이 동굴의 주변지역에 대한 조사를 통하여 자연환경 즉 그중에서도 특히 지형과 지질에 대해서 알아보고자 하였다. 먼저 환선굴이 위치하고 있는 삼척군의 지리적 위치를 살펴보면 삼척군은 강원도의 최남단에 위치하고, 북쪽은 동해시에 남쪽은 경상북도 울진군과 봉화군에 서쪽은 선선군 임계면에 서남은 태백시 등 4개 시ㆍ군과 경계를 이루고 있다.(중략)

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.269-278
• /
• 2012

Aquaplast Thermoplastic (AT) is a tissue-equivalent oral compensator that has been developed to improve dose uniformity at the common boundary and around the treated area during radiotherapy in patients with head and neck cancer. In order to assess the usefulness of AT, the degree of improvement in dose distribution and physical properties were compared to those of oral compensators made using paraffin, alginate, and putty, which are materials conventionally used in dental imprinting. To assess the physical properties, strength evaluations (compression and drop evaluations) and natural deformation evaluations (volume change over time) were performed; a Gafchromic EBT2 film and a glass dosimeter inserted into a developed phantom for dose verification were used to measure the common boundary dose and the beam profile to assess the dose delivery. When the natural deformation of the oral compensators was assessed over a two-month period, alginate exhibited a maximum of 80% change in volume from moisture evaporation, while the remaining tissue-equivalent properties, including those of AT, showed a change in volume that was less than 3%. In a free-fall test at a height of 1.5 m (repeated 5 times as a strength evaluation), paraffin was easily damaged by the impact, but AT exhibited no damage from the fall. In compressive strength testing, AT was not destroyed even at 8 times the force needed for paraffin. In dose verification using a glass dosimeter, the results showed that in a single test, the tissue-equivalent (about 80 Hounsfield Units [HU]) AT delivered about 4.9% lower surface dose in terms of delivery of an output coefficient (monitor unit), which was 4% lower than putty and exhibited a value of about 1,000 HU or higher during a dose delivery of the same formulation. In addition, when the incident direction of the beam was used as a reference, the uniformity of the dose, as assessed from the beam profile at the boundary after passing through the oral compensators, was 11.41, 3.98, and 4.30 for air, AT, and putty, respectively. The AT oral compensator had a higher strength and lower probability of material transformation than the oral compensators conventionally used as a tissue-equivalent material, and a uniform dose distribution was successfully formed at the boundary and surrounding area including the mouth. It was also possible to deliver a uniformly formulated dose and reduce the skin dose delivery.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.26-34
• /
• 2005

In this paper, a novel moving least squares interface welding method is proposed to carry out the coupled analysis of whole model composed of independently modeled finite element substructures with nodal mismatching interfaces. To verify the validity, and efficiency of the proposed interface welding method, various numerical examples are worked out including patch tests, convergence tests, and examples of coupled analyses of the structural systems with mismatching substructures. From the numerical tests, it is confirmed that one can efficiently carry out the coupled analysis of whole model composed of mismatching finite element substructures through the proposed method without any remeshing or any additional unknown.