• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.3
• /
• pp.248-258
• /
• 2006

Genetic diversity of 91 Korean soybean cultivars was assessed with 20 simple sequence repeat (SSR). Twenty SSR loci generated a total of 149 alleles. The number of alleles for each SSR locus ranged from 3 to 15 with a mean of 7.5 alleles. Genetic diversity estimated by PIC value of 91 cultivars was ranged from 0.424 to 0.905 with an average of 0.711. Cluster analysis based on Nei's genetic distances classified 91 soybean cultivars except Geomjeongkong 4 into 7 groups. The majority groups were I, IV, and VI which included 26, 24, and 18 cultivars, respectively. Obvious differences in genetic diversity appeared to be related with the released periods of cultivars and utilization type of cultivars, but not with breeding sites. Cultivars released in 1970's and in 1990's showed the lowest and the highest genetic diversities with 0.576 and 0.706, respectively. Soybean cultivars for vegetable and early maturity showed the lowest genetic diversity with 0.514, while those for soy sauce and tofu showed the highest genetic diversity with 0.691. Genetic distance between soybean cultivar groups developed before 1969 and during 1970's was the nearest, while genetic distance between those developed in 1970's and 1990's was the furthest. Cultivar group for vegetable and early maturity showed the furthest genetic distance with cultivar group for soy sauce and tofu, while it showed the nearest genetic distance with cultivar group for cooking with rice. Genetic distance was greater between soybean cultivar groups developed in Suwon and Iksan than between those developed in Milyang and Iksan.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.894-900
• /
• 1998

An interphase between carbon fiber and epoxy matrix was introduced to increase impact strength of carbon fiber reinforced composites (CFRC) without sacrificing the interlaminar shear strength. Flexible polymers, I. e., MVEMA (poly(methyl vinyl ether-co-maleic anhydride)) and EMA(poly(ethylene-co-maleic anhydride)), which have reactive functional groups were considered as interphase materials. Weight hain of MVEMA and EMA onto the surface of carbon fibers was evaluated by changing the parameters of electrodeposition process. Electrodeposition mechanism of polymers which have anhydride functional group was identified by IR spectroscopy, that is, the generation of $RCOO^-$ functional group by the attack of hydroxide anion in the basic solution was observed. The weight gain was increased by increasing concentration of polymers, current density, and electrodeposition time. However the excess generation of oxygen gas decreased the weight gain by removing the deposited polymers. Washing in the running water easily removed the deposited polymers which are on the fiber surface without bonding, as a results, only 0.5 wt% of deposited polymers are remained.

• Korean Journal of Microbiology
• /
• v.46 no.1
• /
• pp.63-67
• /
• 2010

Proteases catalyze hydrolytic cleavage of a peptide bond between amino acids and occupy pivotal positions in application in physiological and commercial fields. During the screening for novel bacteria producing extracellular protease, two bacterial strains, WD12 and WD32, were isolated from rotten trees and they made clear zone on LB plates supplemented with 1% skim milk. The similarities of 16S rRNA gene sequence of either WD12 or WD32 to GenBank database showed the highest to Pseuoxanthomonas mexicana as 97.8 and 99.8%, respectively. Phylogenetic analysis showed that both isolated was located within the cluster comprising P. mexicana and P. japonesis. WD12 and WD32 were catalase- and oxidase-positive, Gram-negative rod strains. In case of WD12, it could assimilate malate, but could not assimilate D-mannose, which were different characteristics from P. mexicana. Both Pseuoxanthomonas sp. WD12 and WD32 optimally produced extracellular protease at $35-37^{\circ}C$, and maximal activity showed as 656 unit/ml and 267 unit/ml, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.1
• /
• pp.70-81
• /
• 2015

Helicases are known to be a proteins that use the chemical energy of NTP binding and hydrolyze to separate the complementary strands of double-stranded nucleic acids to single-stranded nucleic acids. They participate in various cellular metabolism in many organisms. DEAD-box proteins are ATP-dependent RNA helicase that participate in all biochemical steps involving RNA. DEAD-box3 (DDX3) gene is belonging to the DEAD-box family and plays an important role in germ cell development in many organisms including not only vertebrate, but also invertebrate during asexual and sexual reproduction and participates in stem cell differentiation during regeneration. In this study, in order to identify and characterize DDX3 gene in the earthworm, Perionyx excavatus having a powerful regeneration capacity, total RNA was isolated from adult head containing clitellum. Full length of DDX3 gene from P. excavatus, Pe-DDX3, was identified by RT-PCR using the total RNA from head as a template. Pe-DDX3 encoded a putative protein of 607 amino acids and it also has the nine conserved motifs of DEAD-box family, which is characteristic of DEAD-box protein family. It was confirmed that Pe-DDX3 has the nine conserved motifs by the comparison of entire amino acids sequence of Pe-DDX3 with other species of different taxa. Phylogenetic analysis revealed that Pe-DDX3 belongs to a DDX3 (PL10) subgroup of DEAD-box protein family. And it displayed a high homology with PL10a, b from P. dumerilii.

• Research in Plant Disease
• /
• v.23 no.4
• /
• pp.367-371
• /
• 2017

In 2015, symptoms of die-back on Rosa hybrida were observed in Taean, Korea. The aims of this study were to determine the cause of die-back on Rosa hybrida and characterize the pathogen. The fungal isolates were obtained and used for pathogenicity test, morphological and molecular analyses. The pathogenicity test on healthy branches of Rosa hybrida produced die-back, as the original symptoms. For the morphological study, the isolates were inoculated onto potato dextrose agar and incubated for 7 days at $25^{\circ}C$. The colonies grew up quickly and turned white to gray in color. Conidia were observed under an optical microscope. The features of conidia were ellipsoidal, grayish brown in color, $20-31{\times}11-17{\mu}m$ in size and had one septum. Molecular analyses of the ITS region, TEF and TUB genes were conducted to confirm the identity of the pathogen. The phylogenetic tree of the multi-gene sequences indicated that the causal agent was Lasiodiplodia pseudotheobromae. This study is the first report of die-back caused by Lasiodiplodia pseudotheobromae on Rose (Rosa hybrida).

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.459-466
• /
• 2007

TCP/IP processing imposes a heavy load on the host CPU when it is processed by the host CPU on a very high-speed network. Recently the TCP/IP Offload Engine (TOE), which processes TCP/IP on a network adapter instead of the host CPU, has become an attractive solution to reduce the load in the host CPU. There have been two approaches to implement TOE. One is the software TOE in which TCP/IP is processed by an embedded processor and the other is the hardware TOE in which TCP/IP is processed by a dedicated ASIC. The software TOE has poor performance and the hardware TOE is neither flexible nor expandable enough to add new features. In this paper we designed and implemented a hybrid TOE architecture, in which TCP/IP is processed by cooperation of hardware and software, based on an FPGA that has two embedded processor cores. The hybrid TOE can have high performance by processing time-critical operations such as making and processing data packets in hardware. The software based on the embedded Linux performs operations that are not time-critical such as connection establishment, flow control and congestions, thus the hybrid TOE can have enough flexibility and expandability. To improve the performance of the hybrid TOE, we developed a hardware-based transmission/reception accelerator that processes important operations such as creating data packets. In the experiments the hybrid TOE shows the minimum latency of about $19{\mu}s$. The CPU utilization of the hybrid TOE is below 6 % and the maximum bandwidth of the hybrid TOE is about 675 Mbps.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.3
• /
• pp.18-31
• /
• 2002

In this study, we introduce a concept of advanced neurofuzzy polynomial networks(ANFPN), a hybrid modeling architecture combining neurofuzzy networks(NFN) and polynomial neural networks(PNN). These networks are highly nonlinear rule-based models. The development of the ANFPN dwells on the technologies of Computational Intelligence(Cl), namely fuzzy sets, neural networks and genetic algorithms. NFN contributes to the formation of the premise part of the rule-based structure of the ANFPN. The consequence part of the ANFPN is designed using PNN. At the premise part of the ANFPN, NFN uses both the simplified fuzzy inference and error back-propagation learning rule. The parameters of the membership functions, learning rates and momentum coefficients are adjusted with the use of genetic optimization. As the consequence structure of ANFPN, PNN is a flexible network architecture whose structure(topology) is developed through learning. In particular, the number of layers and nodes of the PNN are not fixed in advance but is generated in a dynamic way. In this study, we introduce two kinds of ANFPN architectures, namely the basic and the modified one. Here the basic and the modified architecture depend on the number of input variables and the order of polynomial in each layer of PNN structure. Owing to the specific features of two combined architectures, it is possible to consider the nonlinear characteristics of process system and to obtain the better output performance with superb predictive ability. The availability and feasibility of the ANFPN are discussed and illustrated with the aid of two representative numerical examples. The results show that the proposed ANFPN can produce the model with higher accuracy and predictive ability than any other method presented previously.

• Korean Security Journal
• /
• no.58
• /
• pp.107-135
• /
• 2019

The purpose of this paper is to compare and analyze the similarities and differences between the security environment, information organization and information activities of Korea and the United States. The comparison will provide insight into Korea and other national intelligence agencies, as well as methodological advances in information research, by providing insight into the overall information and a broad understanding As the history, culture and national power of Korea and the U.S. are different, the organization and activities of intelligence agencies are also different. First of all, in terms of environment, the U.S. carries out intelligence activities for national interest and security in a wide range of areas ranging from North American continental countries to South America, the Middle East, Asia and Asia, while South Korea's intelligence activities are mainly aimed at North Korea and neighboring countries around the Korean Peninsula. In terms of information organization, U.S. intelligence agencies are separate, whereas domestic and foreign intelligence agencies are separate, whereas Korean intelligence agencies are a type of integrated intelligence agency that combines information and investigation, unlike the U.S. In the U.S., the U.S. also operates as an intelligence community, and there are many flexible organizations such as non-tier organizations and centers. Intelligence activities by U.S. intelligence agencies are mainly focused on analysis and overseas processing activities, while Korean intelligence agencies still account for a large portion of domestic information activities. Despite these differences, Korea's intelligence agency was created by imitating U.S. intelligence agencies, and thus has similar aspects in terms of evaluation of security, organization and activities. However, this similarity is shared by all intelligence agencies, so the article will focus on analyzing differences. Finally, for the development of Korean intelligence agencies, the establishment of an intelligence community and efficient control of the National Assembly will be proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4831-4843
• /
• 2014

Magazines on specific genres have been operating collaborative, co-working and collective production systems for value maximization using an adaptation strategy on the dynamic, complex and uncertain value network of the magazine industry. The study used a case study method, and data collection was performed by observational research, depth interviews and survey research. The subjects of the study were 'magazine industry', 'magazine firm and community', and 'collaboration system within creative users'. According to the research results, the ecosystem of magazines on a specific genre has been evolving into an innovative value network system, which is combined with the magazine firm, community users and magazine platform. Second, the rapid introduction of smart device environment changes the way of the collaborating system, in which an action and interaction came out within the community, creative users and magazine firms. Third, the production agency shows strong action and interaction, which fits the magazine platform within the ecosystem of a magazine on a specific genre well. This model has a similar fractal structure to the game, publishing, drama, movie, comic, and animation contents industry, converging to an innovative technology-based-creative-industry.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.301-307
• /
• 2010

Actuation using a shape memory alloy (SMA) is considered to be an important technology that will play a leading role in market for next-generation medical devices because an SMA actuator can accurately imitate skillful and delicate hand movements. However, SMA actuators have not been successfully used because of problems in control design caused by the nonlinear hysteresis effect of SMA, which leads to inaccuracies in control systems. In order to overcome the effect, the authors invented a SMA actuator, which could actively and rapidly cool down and heat up, by combining a SMA catheter and a TE module using the Peltier effect. In order to evaluate the TE characteristics of our TE module system, the changes in the temperature with 1) incremental increases in a continuous electric current and 2) the appearance of a discontinuous constant or reverse current are discussed in this paper.