• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.30-31
• /
• 2001

다중모드간섭을 이용한 소자는 집적광학에서 광신호의 분리와 결합에 있어서 널리 사용되고 있다. 이러한 소자는 편광상태와 파장에 덜 민감하며, 광 대역폭과 제작 허용오차가 크다는 장점을 가진다. 이러한 다중모드간섭기의 설계에 있어서 간섭기의 폭은 주로 출력단에서의 도파로 폭과 도파로간 간격으로부터 정해져왔다. 본 연구에서는 특별히 광신호의 효율적인 분배를 위해 간섭기의 폭과 관련하여 광 분배기의 손실 및 균일도를 최적화하기 위한 방안을 강구하였으며, 근사적인 이론식에 의한 결과와 비교하였다. (중략)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1073-1078
• /
• 2012

This paper presented the extraction solution for the coupling coefficient at the magnetically coupled wireless power transmission(WPT) system through the analysis of its equivalent circuit considering the loss. The conventional extraction solution using coupled mode theory is generalized employing the extracted solution considering the load resistance. Consequently, the measuring process of extracting coupling coefficient becomes convenient since the even/odd mode analysis is not necessary. Furthermore, the coupling coefficient obtained from the induced extraction method was in excellent agreement with the coupling coefficient obtained using the ratio of magnetic flux passing through the two loops. The extraction of the accurate coupling coefficient at the magnetically coupled WPT is an essential work to analyze and optimize the WPT system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.4
• /
• pp.7-14
• /
• 1975

A significant new technique in the dsvelopment of micro-wave circuits is the process of untilization of coupled lines in the transverse electro-magnetic field. The bases for this technique are the application of even-and odd-mode characteristic impedances of the transmission line. This article describes the properties of directional couplers and explains a prccfdure usrd to design micro-strip directional couplers with the aid of the computer. The article also describes the experimental results obtained from seven microstrip couplers, which were built to verify the computer program and the approximate solutions. It can be seen that in cases at X-band where couplings of 10 to 20dB are required, the computer program and approximate solutions will produce good results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.55-60
• /
• 2012

Longitudinal transmission-line modal theory is applied to analyze maximum power transfer in plasmonic grating-assisted directional couplers (P-GADC) based on silicon waveguide. By defining a coupling efficiency amenable to rigorous analytical solutions and interference between even and odd modes, the power exchange of TE modes as a function of propagation distance is evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}=10.26{\mu}m$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition or minium gap condition of GADC.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.239-244
• /
• 2016

The polarization characteristics of polarization-insensitive directional coupler based on double sandwiched rib-type and curved waveguides are explored in detail by using conformal transformation method (CTM) and longitudinal modal transmission-line theory(L-MTLT). To obtain the polarization-insensitive condition of polarization-insensitive curved directional coupler(PI-CDC), the coupling length and coupling efficiency according to the inner radius of PI-CDC are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the PI-CDC with a few micrometer scales can be realized by properly choosing the curvature and structural and material parameters of double sandwiched layers. Furthermore, the mode profiles propagating through PI-CDC are evaluated, and the influence on coupler performance has been investigated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.221-227
• /
• 2015

The polarization characteristics of nano-scale grating-assisted polarization-insensitive coupler (GA-PIC) consisted of double sandwiched rib-type layers are evaluated in detail by using modal transmission-line theory (MTLT) based on equivalent network. To obtain the polarization-insensitive condition of GA-PIC, the coupling lengths as a function of the refractive index and thickness of sandwiched rib-type layer as well as the grating thickness and period are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the GA-PIC with hundreds of nanometer scale is realized by properly choosing structural and material parameters of double sandwiched layers and grating.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.175-180
• /
• 2019

The optical characteristics and power transfers between guiding channels of blazed grating-assisted directional coupler (B-GADC) are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. To evaluate the coupling efficiency of B-GADC, the dispersion curves as a function of the grating period and wavelength are analyzed numerically for quasi-TE and quasi-TM modes. Furthermore, symmetric, sawtooth and asymmetric grating profiles are considered to know the effect of blazing characteristics on power transfer of GADC. The numerical results show that the grating period for minimum-gap condition to obtain maximum power transfer decreases gradually as the blazed structure changes from symmetric to asymmetric profile. On the other hand, the coupling length increases reversely.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.18-19
• /
• 2013

본 논문에서는 Energy storage system을 위한 양방향 DC-to-DC 컨버터를 제안한다. 제안된 양방향 DC-to-DC 컨버터는 플라이백 컨버터와 벅 컨버터를 결합한 구조로, 벅 컨버터의 인덕터는 플라이백 컨버터의 변압기 1차측으로 대체된다. 벅 컨버터의 인덕터를 변압기 1차측으로 대체함으로써 소자의 수를 줄이고, 변압기를 이용함으로써 턴수비에 따른 높은 출력값을 얻을 수 있다. 전력 수요가 적을 시 강압 모드로 동작하여 전력을 저장해 두었다가 전력이 필요한 시점에 승압모드로 동작하여 필요 에너지를 제공한다. 제안된 컨버터의 동작 모드에 따른 이론적 분석을 시행하고 PSIM을 이용한 시뮬레이션을 통해 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.136-137
• /
• 2012

본 논문에서는 하이브리드 전기자동차의 전장시스템 에너지 공급을 위한 보조배터리 충전용 저전압 직류 변환장치(Low voltage DC-to-DC Converter, LDC)를 제안한다. 차량 탑재용의 특성상 소형 경량화 설계 기술을 통한 연비증가, 동력성능의 향상이 매우 중요하다. 본 논문에서 제안하는 LDC는 부스트와 포워드 컨버터 구조를 혼합한 형태로 부스트 컨버터의 입력 인덕터를 변압기로 대체하여 포워드 컨버터와 결합시킴으로서 출력전압의 승 강압 동작을 구현한다. 따라서 차량 시동 시 내연기관을 구동하기 위한 승압모드로 동작하고, 그 외 일반적인 경우는 차량 내 각종 전장부하에 전력을 공급하기 위한 강압모드로 동작된다. 제안된 컨버터의 동작 모드에 따른 이론적 분석을 시행하고 PSIM을 이용한 시뮬레이션을 통해 타당성을 검증한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.935-942
• /
• 2006

In this paper, a novel theory of realizing the series capacitor with broadside coupled suspended substrate stripline (BCSSS) is proposed. The proposed theory is relatively simple because the method of odd mode analysis is only applied: However, this theory supplies reliable result by considering the line effective width and end effect caused by the fringing field. The simulation results are presented to compare and analyze the characteristics of the ideal lumped capacitor and the coupled line capacitor. Also, the capacitive gap coupled line band-pass filter based on the proposed theory are designed and fabricated. The results prove successfully the validity of the proposed theory.