• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.78-85
• /
• 2020

Shotcrete concrete is generally used in the form of ready-mixed concrete products using type I ordinary portland cement(hereinafter referred to as OPC) and about 5% of accelerator mixed separately in the field. In this study, we tested the effect of OPC fineness and SO₃ content on a penetration resistance, compressive strength of binder for shotcrete using calcium aluminate type accerlerator. And we analysed hydrates and pore structure effects on mortar performance. In the future, it is expected to be useful for manufacturing optimized OPC as a binder for shotcrete.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.409-413
• /
• 2014

This study was carried out to design the optimum mixing ratio of aggregate, cyclic aggregate, and binder (moisture, emulsified asphalt, and emulsion type additives) and produce recycling cold asphalt paving mixture satisfying site work standard. The cyclic aggregate satisfying KS F 2572 was collected from waste asphalt by adequate processing. As the moisture content increased, the shearing strength was decreased. The maximum marshall stability was shown at the 3.0 wt% moisture content. So the optimum moisture content was 3.0 wt%. The marshall stability and flow value with the amount of emulsified asphalt was satisfied in the range of 0.5~2.5 wt%, and the porosity was satisfied in the range of 0.7~2.5 wt%. So the optimum amount of emulsified asphalt was 1.6 wt%. The optimum amount of emulsion type additive was 0.1 wt% in the light of marshall stability and degree of saturation of recycling cold asphalt mixture.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.104-112
• /
• 2012

This study involves investigating the correlation between variation of internal structure and heating temperature of alkali-activated fire protection materials using fly ash. Dehydration and micro crack thermal expansion occur in cement hydrates of cementitious materials heated by fire. Internal structure difference due to both the dehydration of cement hydrates and pore solution causes and influences changes in the properties of materials. Also, this study is concerned with change in microstructure and dehydration of the alkali-activated fire protection materials at high temperatures. The testing methods of alkali-activated fire protection materials in high temperature properties are make use of TG-DSC and mercury intrusion porosimetry measurements. The study results show that the alkali-activated fire resistant finishing material composed of potassium hydroxide, sodium silicate and fly ash has the high temperature thermal stability. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.566-571
• /
• 2014

Recently, with concentrated social and engineering interests on durability, diversified subsequent researches have been progressed. The Chloride-induced corrosion, carbonation, freeze-thaw etc, deterioration factors of concrete act to concrete not privately but complexly, Fly ash is most frequently used admixture which is using a reduction method of deterioration. And the fly ash effects on improvement of durability with enhancement of fluidity, decrease of crack with reduction of hydration heat, promotion of long-age strength and have a economic advantage which replaces cement as a binding material. But, fly ash have different qualities and occasionally reduce the durability and strength by adhesion of AE admixture with unburned carbon powder etc. In this study, the experiments will take about various replacement ratio of fly ash concrete, and will analyze, consider the results, after these will verify applicability and validity as admixture and binding material.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.83-84
• /
• 2018

3D printing technology can be applied to various industries, and is trapped by major technologies that change existing manufacturing processes. 3D printing materials must satisfy designability, economy and productivity, and building materials are required to have strength and economy secured technology. 3D printing technology of construction field can be divided into structural materials and internal and external materials, and is mainly done by extruding and adapting. Particularly when it is applied as an exterior materials, it is mainly applied to an unstructured exterior materials and high accuracy is required. The exterior materials can be used as a cement composite materials, it is suitable also for a lamination type, and the role of a cement base bonding material is important. In this research, we developed a cementitious base binder applicable as a 3D printing exterior materials, confirmed density and strength characteristics for application as an exterior materials, a flame retardancy test for improving the fire resistance of buildings and confirmed its possibility.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.216-217
• /
• 2015

This study consist of research on the strength development properties of alkali activated slag(AAS) by differential combination of activators, initial protecting and curing conditions. 3 type of binders cured in the atmosphere, underwater and sealed were estimated compressive strength of 3, 7 and 28 days. Test results showed that strength development properties of binders varied with initial protecting and curing conditions because of ionized anions in pore water.

• Defense and Technology
• /
• no.10 s.164
• /
• pp.43-44
• /
• 1992

복합재 연소관과 노즐을 기계적 체결방법으로 결합하면 결합부위에서 재료의 불연속성과 기하학적 불연속성으로 인한 높은 응력집중이 발생해 구조적으로 매우 취약하게 됩니다. 복합재 연소관의 경우에는 내압을 받는 원통형 구조물이므로 기존의 평판에 대한 연구결과를 그대로 사용할수 없으므로, 이 글에서는 복합재 셀 구조물의 응력 및 파손 해석을 수행할수 있도록 1차전단변형 셀이론을 이용한 유한요소해석 프로그램을 개발하였습니다. 기계적체결부위의 모델링에 대해 검토하였으며 복합재료의 파손평가에 사용되는 여러가지 파손식을 적용해 비교하였습니다. 이 해석 방법을 이용해 복합재 연소관의 적층각, 볼트직경, 연소관의 끝단까지의 길이 등이 파손하중에 미치는 영향을 제시하였습니다

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.307-307
• /
• 1994

본 실험에서는 유전자 재조합으로 제조한 〔$^{125}$/I〕-labeled human GM-CSF를 사용하여 GM-CSF의 HL-60 cell의 표면에 존재하는 GM-CSF 수용체의 특성을 밝히고 수용체에 대한 binding parameter를 확인하고 Immunex(미국) 사에서 제조한 Prokine(Sargramostim)과 Sigma사에서 구입한 GM-CSF(C-9666)를 표준물질로 하여 (주) Lucky에서 제조한 GM-CSF(LBD-005)의 수용체에 대한 결합율을 측정, 각각 비교하고자 하였다. 한편 LBD-005는 glycosylation된 form과 안된 form의 혼합물이므로 당화의 정도가 수용체에 대한 결합에 미치는 영향을 알아보기 위해 glycosylated form과 혼합물(LBD-005)의 수용체에 대한 결합율을 측정 비교하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.139-140
• /
• 2014

최근 건선산업에서 문제점으로 지적되고 있는 것은 제조과정 중 이산화탄소를 다량 방생시키는 시멘트의 사용이다. 이는 알칼리활성 무기결합재로 대체함으로써 시멘트보다 이산화탄소 배출량을 저감할 수 있지만 고가의 알칼리 자극제를 다량 사용하기 때문에 경제적 측면 및 사용성을 고려하지 않으면 사용할 수 없기 때문에 이에 대한 대체재에 관한 연구가 필요한 실정이다. 이에 본 연구에서는 고로슬래그를 기반으로 하는 알칼리 활성 무기결합재에 알칼리 자극제의 사용량을 저감하기 위해 레드머드를 사용하고, 레드머드에 적합한 알칼리 자극제의 종류와 사용방법에 대하여 연구하고자 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.114-121
• /
• 2017

The purpose of this study is to understand a compressive strength and propose a dry shrinkage strain equation being able to predict dry shrinkage of alkali-activated materials(AAM) mortar samples manufactured using fly-ash(FA) and ground granulated blast furnace slag(GGBFS). The main parameters investigated were the GGBFS replace ratios(30, 50, 70 and 100%) and sodium silicate modules(Ms[$SiO_2/Na_2O$] 1.0, 1.5 and 2.0). The compressive strength of AAM increased with increases GGBFS replace ratios or Ms contents. The dry shrinkage strain of AAM decreased with increases Ms contents. But, the dry shrinkage strain of AAM increased as the GGBFS replace ratio increases. Therefore, the GGBFS replace ratio seems to have very significant and important consequences for the mix design of the AAM mortar. The results indicated the R-square of single regression analysis based on each mix properties was the highest value; 0.7539~0.9786(average 0.9359). And the presumption equation of dry shrinkage strain with all variables(GGBFS, Ms and material age) has higher accuracy and its R-square was 0.8020 at initial curing temperature 23 degrees Celsius and 0.8018 at initial curuing temperature 70 degrees Celsius.