• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.28-33
• /
• 2004

An in-line fiber coupler, based on side-polished single-mode fibers covered with an intermediate coupling layer and a planar waveguide, is analyzed by modeling the interaction region as an equivalent multi-layered planar waveguide. The reflectance for the multi-layered structure with and without buffer layer is illustrated as a function of the refractive index and thickness of the overlay waveguides. When the refractive index of the overlay waveguides is greater than that of the fiber core, the conditions for the intermediate coupling layer to increase the power coupling from the fiber to the overlays is also explained. Through the experimental results using a LiNbO$_3$planar waveguide, we show that the theoretical analysis is reasonable and in good agreement with the measured values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1123-1130
• /
• 2004

In this paper, a technique is presented f3r the design of a structurally simple narrow-band orthomode transducer (OMT) operating at 12/14 GHz frequency bands. The proposed OMT has such a structure that a horizontally polarized wave incident on the circular waveguide of the common port is directed to the rectangular waveguide of the straight port, while the vertically polarized wave is directed to the rectangular waveguide of the side port. Firstly methods are developed f3r designing individual parts of the OMT based on the waveguide theory and the theory of impedance matching. Secondly based on developed methods the whole OMT structure is designed using a commercial electromagnetic field analysis software. The validity of the proposed design technique is confirmed by fabricating and testing the designed OMT.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2792-2794
• /
• 1999

본 논문에서는 컴팩트 형광램프용 조도제어형 전자식 안정기의 각 동작 모드별 해석과 설계 및 실험적 고찰을 제시한다. 부스트 컨버터와 해프브리지형 고주파 공진형 인버터를 결합한 일단계 인버터 안정기를 제안하고 그 기본동작 및 특성에 관해 검토한다. 역률을 높이기 위한 방법으로 부스트단에서는 전류불연속 모드로 동작하도록 하였다. 전력 손실을 줄이기 위해 직렬 공진형 인버터는 영전압 영전류 스위칭 방식을 적용하였다. 출력 전압을 조정할 수 있도록 설계하여 조도제어를 구현하였으며 다단계의 조도제어가 가능해진다. 전자식 안정기 시스템을 구성하기 위한 이론적인 근거를 마련하기 위하여 공진형 인버터를 동작 모드별로 해석하고 그 결과를 토대로 동작주파수 및 회로정수를 결정하며, 실제 전자식 안정기를 제작하여 시동특성과 조광특성을 비교 분석하였다. 36W 형광램프에 대한 실험 결과와 등가회로 모델에 의한 Pspice 시뮬레이션 결과를 토대로 제안한 전자식 안정기의 적용가능성을 입증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.598-604
• /
• 2011

A method of miniaturizing branch line coupler with connected coupled lines is presented. The quarter-wavelength transmission lines in the typical microstrip branch line coupler are replaced with the connected coupled lines with same characteristics of ones for compact size. The connected coupled line is analyzed by T-equivalent circuit and Z parameters based on the even-odd mode analysis. The proposed branch line couplers with connected coupled line are designed and fabricated on FR4 substrate at 2.4 GHz. The measured results show good agreement with theoretical prediction. And the experimental results show that the size of coupler is 37 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.169-174
• /
• 2003

We report theoretical and experimental investigation of a polarizer made of single mode side-polished fiber covered with a metal film. The influence of the metal film thickness and the refractive index of overlay on the device performance has been analyzed in terms of the normal mode theory. Based on the theoretical prediction, a polarizer with 40 ㏈ of polarization extinction ratio and 0.5 ㏈ insertion loss at optical communication wavelength has been realized.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1036-1043
• /
• 2003

In this paper, novel lumped equivalent circuits for a conventional parallel directional coupler are proposed. This novel equivalent circuits only have self inductance and self capacitance, so we can design exact lumped equivalent circuit. The equivalent circuit and design formula for the presented lumped element coupler is derived based on the even- and odd-mode properties of a parallel-coupled line. By using the derived design formula, we have designed the 3 dB and 10 dB lumped element directional couplers at the center frequency of 100 MHz and 2 GHz, respectively a chip type directional coupler has been designed with multilayer configurations by employing commercial EM simulator. Designed chip-type directional couplers have a 3 dB-coupling value at the center frequency of 2 GHz and fabricated lumped directional coupler on fr4 organic substrate has a 3 dB, 10 dB-coupling values at the center frequency of 100 MHz. Excellent agreements between simulation results and measurement results on the designed directional couplers show the validity of this paper. Furthermore, in order to adapt to multi-layer process such as Low Temperature Cofired Ceramic (LTCC), chip-type lumped element couplers have been designed by using this method.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.7-10
• /
• 2001

일반적으로 슬라이딩모드 제어는 강인한 특성을 가지나, 시스템 제어의 설계자는 외란이나 변수변화에 대한 최대 값을 알아야 한다. 그러나, 이와 같은 최대 값은 종종 쉽게 구할 수가 없다. 이에 반해 퍼지제어는 불확실한 외란이나 변수변화를 가지는 시스템의 제어기를 설계하는 효과적인 방법을 제시하고 있다. 본 논문에서는 이 두 가지 제어이론의 장점을 결합하여 자기부상시스템에 적용할 고성능의 제어기를 설계하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.23-24
• /
• 2015

본 논문에서는 하나의 입력으로 강압과 승압된 두 개의 출력을 가지는 승 강압 겸용 DC-to-DC 컨버터를 제안한다. 승압 출력이 가능한 컨버터는 기존의 부스트 컨버터와 동일한 구조이고, 강압 출력이 가능한 컨버터는 배터리의 직 병렬 가변 결합을 이용한다. 강압출력이 가능한 컨버터 동작에서 배터리는 강압 출력의 입력원이 되어 기존의 벅컨버터보다 2배 이상 강압 가능한 장점이 있다. 본 논문은 제안하는 승 강압 겸용 DC-to-DC 컨버터의 구조 및 동작 모드에 따른 이론적 분석을 시행하고 컴퓨터 시뮬레이션을 통해 타당성을 검증한다.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.385-391
• /
• 2011

The time-dependent density functional theory (TDDFT) method has been carried out to investigate the excitedstate hydrogen-bonding dynamics of phenol-$(H_2O)_2$ complex. The geometric structures and infrared (IR) spectra in ground state and different electronically excited states ($S_1$ and $T_1$) of the hydrogen-bonded complex have been calculated using the density functional theory (DFT) and TDDFT method. A ring of three hydrogen bonds is formed between phenol and two water molecules. We have demonstrated that the intermolecular hydrogen bond $O_1-H_2{\cdots}O_3-H$ of the three hydrogen bonds is strengthened in $S_1$ and $T_1$ states. In contrast, the hydrogen bond $O_5-H_6{\cdots}O_1-H$ is weakened in $S_1$ and $T_1$ states. These results are obtained by theoretically monitoring the changes of the bond lengths of the hydrogen bonds and hydrogen-bonding groups in different electronic states. The hydrogen bond $O_1-H_2{\cdots}O_3-H$ strengthening in both the $S_1$ and $T_1$ states is confirmed by the calculated stretching vibrational mode of O-H (phenol) being red-shifted upon photoexcitation. The hydrogen bond strengthening and weakening behavior in electronically excited states may exist in other ring structures of phenol-$(H_2O)_n$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.110-118
• /
• 2004

In this paper, a method is presented for the design of an orthomode transducer(OMT) operating at 21/31GHz frequency bands. A square waveguide is used in the common port while the WR-34 standard rectangular waveguide is used in the straight port. The straight port is connected to the common port via a multi-stage quarter-wave impedance transformer. The side port is coupled to the common port through a slot formed along the center line of the common square waveguide. An impedance transformer is employed to match the impedance of the coupling slot with that of the WR-51 waveguide at the output of the side port. Dimensions of the OMT are iteratively optimized employing the theory of waveguide. The validity of the proposed method is verified by fabricating and testing the designed orthomode transducer.