• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.2
• /
• pp.227-235
• /
• 2016

Objectives : The aims of this study were to know the frequency of cognitive dysfunction among patients with autoimmune thyroid disorders, and to reveal influencing factors on it, especially to clarify association with autoimmune thyroid antibodies. Methods : From sixty-five female patients with autoimmune thyroid disorders, demographic data were obtained by structured interview. Their cognitive funtions were measured using the MMSE-K and the MoCA-K tests. Depression was evaluated by the K-HDRS. Results : 1) Among patients with autoimmune thyroid disorders, 7.69% of them were below 24 on the MMSE-K, while 10.77% were below 22 on the MoCA-K. The frequency of cognitive deficit was not significantly different according to having positivity to antimicrosomal antibodies or not. 2) The antimicrosomal antibody-positive patients had significantly higher antithyroglobulin antibody titers, antimicrosomal antibody titers, and TSH concentration, while had significantly lower free T4 levels(p<0.05, respectively). 3) The total scores of the MMSE-K and the MoCA-K had significant correlation with age, marital status, antithyroglobulin antibody titers and K-HDRS(p<0.05, respectively). 4) The regression analysis revealed that variables such as age, education, autoimmune thyroid antibodies, thyroid function and depression did not influence on cognitive function of patients with autoimmune thyroid disorders. Conclusions : Our results could not support that cognitive function of patients with autoimmune thyroid disorders had correlation with autoimmune thyroid antibodies.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.201-213
• /
• 2003

The adsorption property and ability of domestic zeolites for some heavy metal ions (Ag, Pb, Cr, Cu, Zn, Mn), which may cause a serious environmental problem in industrial wastewater, were evaluated on ore unit through a series of adsorption experiments together with careful examinations of mineral composition and properties of the zeolites. Though the adsorption behavior basically took place in the form of a cation exchange reaction, the higher CEC value does not necessarily to imply the higher adsorption capacity for a specific heavy metal. A general trend of the adsorption selectivity for heavy metals in the zeolites is determined to be as follow: $Ag\geq$Pb>Cr,Cu$\geq$Zn>Mn, but the adsorption properties of heavy metal ions somewhat depend on the species and composition of zeolite. Clinoptilolite tends to adsorb selectively Cu in case of Cr and Cu, whereas heulandite prefers Cr to Cu. A dominant adsorption selectivity of the zeolite ores for Ag and Pb is generally conspicuous regardless of their zeolite species and composition. The zeolite ores exhibit a preferential adsorption especially for $Ag^{+}$ so as not to regenerate when treated with $Na^{+}$ . In the adsorption capacity for heavy meta ions, the zeolites differ in great depending on their species: ferrierite>clinoptilolite>heulandite. Considering the CEC value of mordenite, the mordenite-rich ore appears to be similar to the clinoptilolite ore in the adsorption capacity. The adsorption capacity for heavy metals is not positively proportional to the CEC values of the zeolites measured by the exchange reaction with ammonium ion. In addition, the adsorption capacity roughly tends to depend on the zeolite contents, i.e., the grade of zeolite ore, but the trend is not consistent at all in some ores. These may be caused by the adsorption selectivity for some specific heavy metals, the presence of possible stacking micro-faults and natural cations such as K hardly to exchange in the zeolite. Considering the economic availability and functional effectiveness as natural zeolite resources, clinoptilolite ores could be applicable to utilize the domestic zeolites for the removal of heavy metals.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.97-109
• /
• 2009

One of the main causes of asphalt rutting is high temperature of the pavement. Nevertheless, there has been few research on lowering the pavement temperature for reducing rutting. This study investigated the performance characteristics of moisture-retaining porous asphalt pavement, which is known to have a temperature reducing effect. The purpose of this study is to quantify the temperature reducing effect of moisture-retaining porous asphalt pavement and its effect of reducing rutting through Accelerated Pavement Testing(APT). Additionally, the possibility of reducing the thickness of the pavement in comparison to general dense grade pavement by analyzing structural layer coefficient of moisture retaining pavement. A total of three test sections consisting of two moisture-retaining porous asphalt pavement sections and one general dense-grade porous asphalt pavement section were constructed for this study. Heating and spraying of water were carried out in a regular cycle. The loading condition was 8.2 ton of wheel load, the tire pressure of $7.03kgf/cm^2$, and the contact area of $610cm^2$. The result of this experiment revealed that the temperature reducing effect of the pavement was about $6.6{\sim}7.9^{\circ}C$(average of $7.4^{\circ}C$) for the middle layer and $7.9{\sim}9.8^{\circ}C$(average of $8.8^{\circ}C$) for surface course, resulting in a rutting reduction of 26% at the pavement surface. Additionally, the structural layer coefficient of moisture retaining pavement measured from a laboratory test was 0.173, about 1.2 times that of general dense grade pavement. The general dense-grade porous asphalt pavement test section exhibited rutting at all layers of surface course, middle layer, and base layer, while the test sections of moisture-retaining porous asphalt pavement manifested rutting mostly at surface course only.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• The Korean Society of Law and Medicine
• /
• v.17 no.2
• /
• pp.3-28
• /
• 2016

While product liability has been settled as a technical term in civil law, criminal law does not commonly accept technical term for it. Not like civil law, product liability in criminal law point outs individual responsibility and disability of normative order. Meaning that causation between individual's action of violation of duty and the result of danger of legal interest or infringement of legal interest must be proved. In criminal law excluding "non-result-constituted crimes (Unternehmensdelikt)", charge of injuring, accidental infliction of injury, homicide or involuntary manslaughter is problematic in product liability. Of course, it is necessary to distinguish whether the action related to the outcome is act or ommission. Also the causal relationship between the action and the result must be proved, and the intention or negligence should be recognized. In this paper, it analyzes cases that were problematic in Korea, Germany, Spain, etc. Mainly focusing on the problems revealed in the determination of causal relationship, especially recognizing criminal liability related to products. Furthermore it is followed by the view of reviewing the cause-and-effect relationship by 2 steps, dividing natural scientific causation and the normative causal relationship. In this process, to acknowledge criminal product liability in accordance with recognizing cause-and-effect relationship, there should be general risk of specific substance causing the outcome. This only premise can be meaningful to examine the casual relationship from specific cases. As it shows in some cases and theories, it is not contradicting general law of cause and effect by determining specific causal relationship by free evaluation of evidence if a general causal relationship does not exist. Also since judge's testimony does not hold a dominant position from rule of thumb, it is possible to recognize specific causal relationship. However this paper takes position that if there is no objective and reasonably undeniable cause and effect law. If there is no objective and reasonably undeniable causal law, which is the premise for recognizing concrete causal relations, judge should sentence guilty according to "in dubio pro reo" principle. In addition, it is not allowed for the defendant to burden unproven fact by free evaluation of evidence which has an effect of shift of burden of proof.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.279-284
• /
• 2008

The phase change materials have been extensively used as an optical rewritable data storage media utilizing their phase change properties. Recently, the phase change materials have been spotlighted for the application of non-volatile memory device, such as the phase change random access memory. In this work, we have investigated the crystallization behavior and microstructure analysis of In-Sb-Te (IST) thin films deposited by RF magnetron sputtering. Transmission electron microscopy measurement was carried out after the annealing at $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$ and $450^{\circ}C$ for 5 min. It was observed that InSb phases change into $In_3SbTe_2$ phases and InTe phases as the temperature increases. It was found that the thickness of thin films was decreased and the grain size was increased by the bright field transmission electron microscopy (BF TEM) images and the selected area electron diffraction (SAED) patterns. In a high resolution transmission electron microscopy (HRTEM) study, it shows that $350^{\circ}C$-annealed InSb phases have {111} facet because the surface energy of a {111} close-packed plane is the lowest in FCC crystals. When the film was heated up to $400^{\circ}C$, $In_3SbTe_2$ grains have coherent micro-twins with {111} mirror plane, and they are healed annealing at $450^{\circ}C$. From the HRTEM, InTe phase separation was occurred in this stage. It can be found that $In_3SbTe_2$ forms in the crystallization process as composition of the film near stoichiometric composition, while InTe phase separation may take place as the composition deviates from $In_3SbTe_2$.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.4
• /
• pp.305-312
• /
• 2007

Objective: To evaluate the efficacy of split insemination method in treatments for non-male factor infertility. Method: Laboratory and clinical data were collected from 505 cycles of split insemination during 2002$\sim$2005 in our center. The subjects were non-male factor infertility such as endometriosis, tubal, uterine, PCOS and idiopathic infertility without any sperm defects. Retrieved oocytes were randomly divided, and inseminated by conventional IVF or ICSI. Fertilized zygotes were cultured for 2$\sim$5 days to ET date, and surplus zygotes and embryos were frozen for subsequent frozen-thawed ET cycles. Clinical outcomes according to insemination method were compared by statistical analysis. Results: The overall fertilization per retrieved oocytes was significantly higher in ICSI than that of conventional IVF in sibling oocytes (62.5$\pm$22.3% vs 52.9$\pm$28.0%, p<0.01). Total fertilization failure occurred only in 2 of 505 cycles (0.4%) in split insemination cycles. Incidence of fertilization failure and poor fertilization rate less than 30% by ICSI were significantly lower than those of conventional IVF (1.1% and 7.5% vs 8.5% and 22.0%, p<0.01). Delivery rates after transfer of fresh and thawed embryos from split insemination cycles were 40.0% (185/462) and 35.0% (55/157), respectively. There was no significant difference in the implantation and delivery rates of ET with embryos from conventional IVF or ICSI. Conclusion: Taken together, the split insemination method improves poor fertilization rates resulting in successful clinical outcomes and thus could be used for non-male factor infertile couples in human ART program.

• Childhood Kidney Diseases
• /
• v.10 no.1
• /
• pp.8-17
• /
• 2006

Purpose : We describe the changes of rat glomerular epithelial cells when exposed to high levels of glucose and advanced glycosylation endproducts(AGE) in the in vitro diabetic condition. We expect morphological alteration of glomerular epithelial cells and permeability changes experimentally and we may correlate the results with a mechanism of proteinuria in DM. Methods : We made 0.2 M glucose-6-phsphate solution mixed with PBS(pH 7.4) containing 50 mg/mL BSA and pretense inhibitor for preparation of AGE. As control, we used BSA. We manufactured and symbolized five culture dishes as follows; B5 - normal glucose(5 mM) + BSA, B30 - high glucose(30 mM) + BSA, A5 - normal glucose(5 mM) + AGE, A30 - high glucose(30 mM) + AGE, A/B 25 - normal glucose(5 mM) + 25 mM of mannitol(osmotic control). After the incubation period of both two days and seven days, we measured the amount of heparan sulfate proteoglycan(HSPG) in each dish by ELISA and compared them with the B5 dish at 2nd and 7th incubation days. We observed the morphological changes of epithelial cells in each culture dish using scanning electron microscopy(SEM). We tried the permeability assay of glomerular epithelial cells using cellulose semi-permeable membrane measuring the amount of filtered BSA through the apical chamber for 2 hours by sandwich ELISA. Results : On the 2nd incubation day, there was no significant difference in the amount of HSPG between the 5 culture dishes. But on the 7th incubation day, the amount of HSPG increased by 10% compared with the B5 dish on the 2nd day except the A30 dish(P<0.05). Compared with the B5 dish on the 7th day the amount of HSPG in A30 and B30 dish decreased to 77.8% and 95.3% of baseline, respectively(P>0.05). In the osmotic control group (A/B 25) no significant correlation was observed. On the SEM, we could see the separated intercellular junction and fused microvilli of glomerular epithelial cells in the culture dishes where AGE was added. The permeability of BSA increased by 19% only in the A30 dish on the 7th day compared with B5 dish on the 7th day in the permeability assay(P<0.05). Conclusion: We observed not only the role of a high level of glucose and AGE in decreasing the production of HSPG of glomerular epithelial cells in vitro, but also their additive effect. However, the role of AGE is greater than that of glucose. These results seems to correlate with the defects in charge selective barrier. Morphological changes of the disruption of intercellular junction and fused microvilli of glomerular epithelial cells seem to correlate with the defects in size-selective barrier. Therefore, we can explain the increased permeability of glomerular epithelial units in the in vitro diabetic condition.