• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.70-76
• /
• 2006

The microstructure evolution during a hot forging of Waspaloy was investigated using the recrystallization model and FEM simulation. In order to obtain an uniform microstructure, hot forging was carried out by two step. The change of grain size during hot forging has a deep connection with dynamic recrystallization behavior. Avrami-type constitutive equation for the dynamic recrystallization was implemented into an user subroutine of 2D FE simulator. The evolution of grain structure in the two-step forging of Waspaloy was simulated using the 2D FEM user-subroutine. The detailed variation of microstructures due to dynamic recrystallization could effectively be predicted at various locations in a forged pancake.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.147-152
• /
• 1993

The lapping characteristics of single crystal diamond are studied by considering the crystallographic anisotropy. It is introduced for lapping method to identify crystallographic orientantion by the X-ray diffraction and to measure lapping force ratio, lapping temperature and lapping wear. Diamound bonded wheels are used for lapping under dry condition. On the lapping {110} and {100} planes, it shows remarkable crystallographic anistropy. The lapping force ratio, temperature and wear become gerater with sliding direction along the <100> than along <110>. The results also show that the wear of diamond is influenced by mechanical work(tangential lapping force * lapping distance) as well by lapping speed.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.585-592
• /
• 1993

The effects of grain size and microstructure on the ultrasonic attenuation was investigated with SCM440 steel quenched and tempered at various temperatures. The ultrasonic attenuation was primarily due to the grain boundary scattering and the ultrasonic attenuation coeffecient increased with increasing grain size. In the meantime, it was found that the ultrasonic attenuation coefficient decreased with increasing tempering temperature. The dependence of ultrasonic attenuation coefficient on the frequency of ultrasonic wave had linear relationship on a log-log scale and was proportional to the Roney's equation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.2
• /
• pp.60-66
• /
• 2001

($Ba_x$$Sr_{1-x}$)$TiO_3$ (x=0.9, 0.7, 0.5) thin films were prepared on ITO-coated glass by sol-gel method. Perovskite phase formation temperature of BST thin films seemed to be higher than $600^{\circ}C$. Peaks of perovskite phase shift to high diffraction angles as the Sr/(Ba+Sr) ratio was increased, due to the smaller ionic size of $Sr^{2+}$ than $Ba^{2+}$ . As a heating temperature was increased, the grain became coarser. And as Sr/(Ba + Sr) ratio was increased, the grain became finer. Dielectric constants of the BST(50/50) thin film are higher and dielectric losses of that are lower than those of the others. Dielectric constant and dielectric loss of the BST(50/50) thin film were 652 and 0.042 at 1kHz, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.818-823
• /
• 2012

In order to predict necking behaviour of aluminium sheets, a crystal plasticity model is introduced in the finite element analysis of tensile test. Due to the computational limits of time and memory, only a small part of tensile specimen is subjected to the analysis. Grains having different orientations are subjected to numerical tensile tests and each grain is discretized by many elements. In order to predict the sudden drop of load carrying capacity after necking, a well-known Cockcroft-Latham damage model is introduced. The mismatch of grain orientation causes stress concentration at several points and damage is evolved at these points. This phenomenon is similar to void nucleation. In the same way, void growth and void coalescence behaviours are well predicted in the analysis. For the comparison of prediction capability of necking, same model is subjected to finite element analysis using uniform material properties of polycrystal with and without damage. As a result, it is shown that the crystal plasticity model can be used in prediction of necking and fracture behavior of materials accurately.

• Journal of the Korean Magnetics Society
• /
• v.3 no.3
• /
• pp.215-220
• /
• 1993

Microstructural dependence of magnetic property of RF/DC sputtered $Co_{69.0}Ni_{18.5}Cr_{12.5}/Cr$ double layer thin film was studied. Grain size was found to be decreased with substrate temperature in the range of $100-200^{\circ}C$ and Cr underlayer thickness(from $500\;{\AA}-2000\;{\AA}$). The peaks (200) and (1120) of X-ray diffraction patterns were evidently grown with the substrate temperature for the Cr underlayer and magnetic layer, respectively. The CoNiCr magnetic layer was found to be well epitaxialy grown on Cr underlayer, and subsequently the coercivity was enhanced.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.79-83
• /
• 2003

The microstructure of bulk electrolytic MnO₂ (EMD) was studied using x-ray diffraction and transmission electron microscopy (TEM). The bulk sample showed a typical powder x-ray diffraction pattern of EMD materials. TEM study showed that the structure of EMD is present at two length scales;grains, ∼0.2 ㎛ in diameter, and ∼10 nm crystallites within the grain. The electron beam microdiffraction study revealed that each grain is an assemblage of multiphase with a common crystallographic orientation, and_that ∼50% of the crystallites are Ramsdellite, ∼30% are ε-MnO₂, and ∼15% are Pyrolusite. The ｛1120｝peak located at about 67° in powder XRD pattern as well as a high-resolution electron microscope (HREM) image of (0001) plane support the existence of ε-MnO₂ phase.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.339-343
• /
• 2005

Pt-$SrBi_2Nb_2O_9(SBN)-Pt-Y_2O_3-Si$ gate field effect transistors (MFMISFETs) have been fabricated and the SBN thin films are rapid thermal annealed in oxygen plasma. The grain size of the SBN becomes 4 times much larger than that of furnace annealed SBN films even at the same annealing temperature of $700^{\circ}C$, remnant polarization value of Pt-SBN-Pt is improved by 2 times. Using the rapid grain growth of SBN for the MFM-ISFET, memory window and programming characteristics of on/off states are fairly well improved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.328-328
• /
• 2013

본 연구에서는 선형 대향 타겟 스퍼터 시스템을 이용하여 Hetero sputtering 방법으로 증착한 AlGaZnO (AGZO) 박막의 두께에 따른 특성을 연구하였다. DC Power 250 W, Working pressure 0.3 mTorr, Ar 20 sccm의 고정된 성막 조건하에서, AGZO 박막의 두께가 25 nm에서 1 um로 증가함에 따른 전기적, 광학적, 구조적, 표면 특성을 Hall measurement, UV/visible spectrometry, Ellipsometry, XRD, FESEM 분석을 통해 분석하고 이를 설명할 수 있는 메커니즘을 제시하였다. 선형 대향 타겟 스퍼터의 장점으로 인해 상온에서도 우수한 특성을 갖는 AGZO 박막을 성장 시킬 수 있었으며 AGZO 박막의 전기적, 광학적특성은 다른 산화물 투명 전극 박막과 마찬가지로 두께에 매우 큰 영향을 받는 것을 알 수 있었다. 이러한 두께에 따른 특성 변화는 상온에서도 Columnar 구조를 가지는 AGZO의 구조적 특성과 밀접한 연관이 있으며 특히 결정립 크기가 AGZO의 광학적, 전기적 특성에 큰 영향을 미침을 XRD 분석을 통해 확인하였다. 또한 AGZO 두께에 따른 결정성의 차이가 박막의 n값에도 영향을 미침을 엘립소미터 분석을 통해 확인할 수 있었다. Scherrer formula을 활용하여 계산한 결과 AGZO 박막의 두께 증가에 따라 결정성 향상 및 결정립의 크기가 증가함을 알 수 있었으며, 이는 FESEM 분석을 통해서도 확인할 수 있었다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.38-41
• /
• 1995

The effects of Nb and Cu additives as will as substitutional Co into $Nd_{4}Fe_{85.5}B_{10.5}$ melt-spun alloy were studied aiming for finding a $\alpha$-Fe based Nd-Fe-B composite alloys with high energy product. The addition of Nb and Cu to $Nd_{4}Fe_{85.5}B_{10.5}$ decreased the average grain size and increased the coercivity up to 207kA/m(2.6kOe), Further-more, the substitution of Co for Fe in $Nd_{4}Fe_{82}B_{10}Nb_{3}Cu_{1}$ alloy resulted in the decrease of the average grain size (<20nm) and improved the hard magnetic properties. The remanence, coercivity and energy product of optimally annealed $Nd_{4}Fe_{74}Co_{8}B_{10}Nb_{3}Cu_{1}$ alloy were 1.345, 219kA/m(2.75kOe) and $95.5kJ/m^{3}$(12MGOe), respectively.