• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.57-64
• /
• 2010

A performance test of inter propellant seal for a 75 ton class turbopump is conducted using water to evaluate leakage and endurance performance. Each part of fuel pump side and oxidizer pump side for a prototype inter propellant seal has been tested for verifying endurance performance during total accumulated test time 2,100 sec in water. The fuel pump side part with one-stage seal of carbon floating ring shows average leakage rate 13.7 gram/sec under average seal differential pressure 9.4 bar. On the other hand, the oxidizer pump side part with two-stage seal assembly of carbon floating rings shows average leakage rate 7.3 gram/sec under average seal differential pressure 9.5 bar. After the endurance performance test, the inter propellant seal shows good physical condition. A leakage performance test of the inter propellant seal for cryogenic environment will be performed using LN2 in the near future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.47-53
• /
• 2010

A performance test of a 75 ton class turbopump inter propellant seal is conducted using water to evaluate leakage and endurance performance. Each fuel pump side part and oxidizer pump side part of a prototype inter propellant seal has been tested for verifying endurance performance during total accumulated test time 2,100 sec in water. The fuel pump side part with 1 stage carbon floating ring seal shows average leakage rate 13.7 gram/sec under average seal differential pressure 9.4 bar. On the other hand, the LOx pump side part with 2 stage carbon floating ring seal shows average leakage rate 7.3 gram/sec under average seal differential pressure 9.5 bar. After the endurance performance test, the inter propellant seal shows good physical condition. A cryogenic leakage performance test of the inter propellant seal will be performed using LN2 in the near future.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.121-125
• /
• 1996

자동차의 환경규제, 고성증화에 맞추어 새로이 규격이 제정된 ILSAC GF-2 가솔린엔지유는 SEQ VI와 SEQ VIA를 통한 연비시험 결과 ILSAC GF-1엔지유에 비해서 연비성능이 향상되었으며, phosphorous함량 규제에 따라 ZnDDP의 첨가량을 줄였음에도 불구하고 다른 산화방지제와 마모방지제를 투입함으로써 규격엔진시험을 통과하였고 실파를 이용한 시험에서는 ILSAC GF-1에 비해서 우수한 마모방지성능과 산화안정성을 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.942-949
• /
• 2004

This paper proposes and analyzes the anti-collision algorithm in Ubiquitous ID system. We mathematically compares the performance of the proposed algorithm with that of binary search algorithm, slotted binary tree algorithm using time slot, and bit-by-bit binary tree algorithm proposed by Auto-ID center. We also validated analytic results using OPNET simulation. Based on the analytic results, comparing the proposed algorithm with bit-by-bit algorithm which is the best of existing algorithms, the performance of proposed algorithm is about 5% higher when the number of tags is 20, and 100% higher when the number of tags is 200.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2007.02a
• /
• pp.97-100
• /
• 2007

본 논문은 유비쿼터스 센서 네트워크와 텔레매틱스 서비스에 사용되는 무선 환경 프로토콜 표준 중 UHF 대역 프로토콜인 EPCglobal의 Class 1 Gen 1, Class 1 Gen 2의 에어인터페이스를 분석하고 각 프로토콜에서 규정된 충돌방지 알고리즘을 구현하였다. 그리고 각 프로토콜에서 규정하는 충돌방지 알고리즘의 성능을 개선한 알고리즘을 제안하고 성능을 비교하였다. 개선된 알고리즘과 표준 알고리즘의 성능 시뮬레이션 결과 개선된 Class 1 Gen 1 알고리즘은 태그 수 100개 일 때 54.5%, 태그 수 1000개 일 때 63.4% 감소하였다. 개선된 Class 1 Gen 2 알고리즘은 태그 수 100개 일 때 7.9%, 태그 수 1000개 일 때 11.7% 감소하였다. 개선된 충돌방지 알고리즘은 표준 알고리즘보다 태그 인식 성능이 상당히 개선됨을 알 수 있다. 따라서 개선된 충돌방지 알고리즘은 유비쿼터스 센서 네트워크와 텔레매틱스 서비스 등에 사용되는 무선인식 시스템의 성능 개선방안으로 적용될 수 있다.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.17-21
• /
• 2020

Over 60% of South Korea's land consists of mountainous topography, and recently, due to earthquakes, localized heavy rains and road development, the risks of rockfalls are getting higher. As of now, rockfall prevention facilities are being constructed in 70% of Korean roads cut slope and rockfall protections account for about 20% of them. Rockfall protection's supporting capacity is defined by combining performance of wire mesh, pillars and wire ropes. For the existing constructed rockfall protection, standards of pillars that can absorb 48~61 kJ amount of energy, wire ropes and wire mesh are presented in Guidelines for the installation and management of traffic safety facilities, Rockfall prevention facilities by Ministry of Land, Transport and Maritime Affairs (2008). However, each factor's correlation of absorption energy is not presented so it is uncertain. This study will conduct vertical drop test and identify adequacy of rockfall protection net of displacement quantity calculation factor which is delta and evaluate rockfall protection net's absorbable energy through standards of overseas performance evaluation criteria.

• Product Safety
• /
• s.193
• /
• pp.80-87
• /
• 2010

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.11-16
• /
• 2020

It is necessary to assess the proper performance of the existing rockfall prevention net in order to minimize the damage to human lives and property in the event of rockfall. However, there is no standard for performance evaluation of rockfall prevention net in Korea, and only the design of rockfall prevention net exists by calculating energy that can be absorbed energy. Therefore, laboratory pullout test was conducted for the performance evaluation of the rockfall prevention net, cuts and load-displacement characteristics of the PVC coating net used in the laboratory pullout test are determined to identify the performance of the rockfall prevention net.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1B
• /
• pp.17-26
• /
• 2005

RFID(Radio Frequency IDentification) is a technology that automatically identifies objects attached with electronic tags by using radio wave. For the implementation of an RFID system, an anti-collision algorithm is required to identify several tags within the RFID reader's range. Few researches report the performance trade-off among anti-collision algorithms in terms of the communications traffic between the reader and tags, the identification speed, and so on. In this paper, we analyze both tree based memoryless algorithms and slot aloha based algorithms that comprise of almost every class of existing anti-collision algorithms. To compare the performance, we evaluated each class of anti-collision algorithms with respect to low-cost RFID system with 96-bit EPC(Electronic Product Code). The results show that the collision tracking tree algorithm outperforms current tree based and aloha based algorithms by at least 2 times to 50 times.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.851-862
• /
• 2004

RFID(Radio frequency IDentification) is a technology that automatically identifies objects containing the electronic tags by using radio wave. The multi-tag identification problem is the core issue in the RFID and could be resolved by the anti-collision algorithm. However, most of the existing anti-collision algorithms have a problem of heavy implementation cost and low performance. In this paper. we propose a new tree based memoryless anti-collision algorithm called a collision tracking tree algorithm and presents its performance evaluation results obtained by simulation. The Collision Tracking Tree algorithm proves itself the capability of an identification rate of 749 tags per second and the performance evaluation results also show that the proposed algorithm outperforms the other two existing tree-based memoryless algorithms, i.e., the tree-walking algorithm and the query tree algorithm about 49 and 2.4 times respectively.