• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.214-217
• /
• 1999

본 논문은 비균일, 비선형 분포를 가지는 비정형 하이드로폰 어레이를 견인하여 목표물로부터 발생된 협대역 신호에 대한 DOAs(Direction-Of-Arrivals) 및 도플러 주파수 정보를 동시에 추정하는 기법을 제안한다. 균일분포 선형 어레이를 견인하는 전통적인 처리기법은 DOA 추정에 국한되어 활용될 수 있다는 한계점을 가지고 있을 뿐 아니라 목표물의 특징을 파악할 수 있는 중요한 정보 중의 하나인 발생신호의 주파수 성분을 추정하기 위해서는 주파수 스펙트럼을 별도로 구성하여야하는 등의 난점을 지니고 있어 조기 경보 능력의 치명적인 제한점을 가질 수 있으며, 하이드로폰 어레이의 구조가 외부적인 환경요인에 의하여 선형을 유지하지 못함으로써 추정능력을 저하시킬 수 있다. 본 논문에서는 이러한 한계성을 극복하기 위하여 불규칙한 곡면을 가지고 있는 모함의 측면에 하이드로폰 어레이를 설치하여 목표물의 DOA 뿐만 아니라 모함의 이동에 의해 목표물과 사이에서 발생하는 도플러 주파수까지 동시에 추정하는 기법을 제안한다 특별히, 도플러 주파수 추정은 취득신호에 대한 퓨리에 변환과정을 거치지 않고 추정함으로써 계산량을 감소시킬 수 있다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.213-230
• /
• 2008

The aim of this study was to analyze the initial movement and the stress distribution of each tooth and periodontal ligament during the lingual lever-arm retraction of 6 maxillary incisors using FEA. Two kinds of finite element models were produced: 2-properties model (simple model) and 24-properties model (multi model) according to the material property assignment. The subject was an adult male of 23 years old. The DICOM images through the CT of the patient were converted into the 3D image model of a skull using the Mimics (version 10.11, Materialise's interactive Medical Image Control System, Materialise, Belgium). After series of calculating, remeshing, exporting, importing process and volume mesh process was performed, FEA models were produced. FEA models are consisted of maxilla, maxillary central incisor, lateral incisor, canine, periodontal ligaments and lingual traction arm. The boundary conditions fixed the movements of posterior, sagittal and upper part of the model to the directions of X, Y, Z axis respectively. The model was set to be symmetrical to X axis. Through the center of resistance of maxilla complex, a retraction force of 200g was applied horizontally to the occlusal plane. Under this conditions, the initial movements and stress distributions were evaluated by 3D FEA. In the result, the amount of posterior movement was larger in the multi model than in the simple model as well as the amount of vertically rotation. The pattern of the posterior movement in the central incisors and lateral incisors was controlled tipping movement, and the amount was larger than in the canine. But the amount of root movement of the canine was larger than others. The incisor rotated downwardly and the canines upwardly around contact points of lateral incisor and canine in the both models. The values of stress are similar in the both simple and multi model.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.2
• /
• pp.214-218
• /
• 2006

Purpose: We describe a new technique of arthroscopic medial plication using pull-out suture with consideration of anatomical location of medial patellofemoral ligament for the treatment of acute or recurrent patellar dislocation. Operative technique: Under arthroscopic examination, sutures are passed through the medial capsule, at which medial patellofemoral ligament is located, from outside to inside of knee joint. Three guide wires are inserted from anterior surface of the patella to upper half of its medial border. Intraarticular portions of sutures are pulled out toward anterior surface of the patella through bony tunnels. Under appropriate tension, the sutures are tied after performing lateral retinacular release. Conclusion: As suturing medial patellofemoral ligament, this technique can maximize the effect of medial plication and can correct subluxation and tilt of the patella. It seems to be a minimally invasive, easy and effective method for the treatment of acute or recurrent patellar dislocation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1085-1090
• /
• 2011

To assure the safety of rolling stock, it is important to perform the fatigue analysis of reduction gear unit in rolling stock considering a variation of velocity and traction motor capability. This paper presents fatigue analysis of the damage of reduction gear unit of railway vehicle under variable amplitude loading(VAL) based on quasi-static fatigue analysis using finite element model and linear Miner's rule. The VAL for the simulation was constructed from the tractive effort curve and train run curves of railway vehicle under commercial operation condition using MSC.ADAMS dynamic analysis. The finite element model for evaluating the carburizing effect on the gear surface was used for predicting the fatigue life of the middle gear based on strain-life based approach. The results showed that the frequent high starting torque due to a quick start as well as increasing numbers of stops at station would decrease the fatigue life of reduction gear unit.

• Journal of Veterinary Clinics
• /
• v.30 no.2
• /
• pp.134-137
• /
• 2013

A 4-month-old intact male Jindo dog was presented for left hindlimb lameness. On radiographs, a small mineralized piece was identified beneath the apophysis of tibia with no or minimal displacement of apophysis bilaterally. Subsequently, the cranioproximal bony aspect of the tibia changed radiolucent to radiopaque. The left side recovered after surgical management, but the right side was self-limited with conservative management. The diagnosis was partial avulsion fracture of the tibial tuberosity which has been called 'Osgood-Schlatter disease' in dogs.

• Journal of the Korean Society of Radiology
• /
• v.79 no.5
• /
• pp.276-281
• /
• 2018

Immunoglobulin G4 (IgG4)-related lung disease has been actively studied over the past few years. Radiologic findings of IgG4-related lung disease vary among patients, but there are no long-term follow up studies regarding variations in imaging features over the course of disease progression. In two cases with relatively long-term follow up, diverse early and late computed tomography (CT) findings of IgG4-related lung disease are reviewed in this report. In contrast to nodular or diffuse ground-glass opacity, which was predominantly noted in CT scans at earlier stages of disease, honeycombing and traction bronchiectasis were regarded as late radiologic manifestations. Solid nodules might be visible in both early and late stages; however, development of new solid nodules and enlargement of preexisting nodules could occur during disease progression. Interlobular septal thickening and mediastinal/hilar lymphadenopathy were persistent, even in later stages of the disease. These findings might be useful in making an accurate and timely diagnosis of IgG4-related lung disease.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.171-178
• /
• 2021

Caravans are easily affected by external physical factors and often cause dangerous situations for passengers. Therefore, in order to secure the stability of the passenger, there is a need to develop a sway reduction device capable of preventing the sway phenomenon in advance. This paper aims to minimize the hitch angle between the tow vehicle and the caravan. Specifically, the initial instability of the caravan is detected through an IMU sensor mounted on each of the tow vehicle and the caravan, and a control value is calculated to reduce errors from the Hitch angle and Hitch yaw rate using a PID controller. Different braking torques are generated, distributed, and controlled on the left and right brakes of the caravan according to the calculated control value. It could be verified through the driving experiment that the hitch angle was decreased compared to the case where the performance of the sway reduction device was not controlled, and the transverse stability improvement rate was improved by 94.49% compared to before control.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.942-945
• /
• 2010

국내 비디오 게임 시장규모는 휴대용 게임을 중심으로 날로 성장하고 있다. 사용성을 특징으로 하는 휴대용 게임은 비디오 게임 시장의 견인차 역할을 하고 있으며, 이러한 휴대용 게임의 사용성에 대한 평가 모델의 개발이 필요한 실정이다. 본 연구에서는 HCI이론을 기반으로 휴대용 게임의 사용성에 대한 평가요소를 제시하는 것을 목적으로 한다. 이를 통해 휴대용 게임 SW의 사용성에 대한 방향을 제시할 수 있을 것으로 기대한다. 본 연구의 목적을 달성하기 위해 HCI 사용성 요소와 기존 품질모델의 사용성 요소를 바탕으로 게임SW의 사용성 평가요소를 도출하고 휴대용 게임의 특성과의 관계를 고려하여 휴대용 게임 SW의 평가요소를 제시하였다.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.339-348
• /
• 2006

Objective: With development of the skeletal anchorage system, orthodontic mini-implant (OMI) assisted on masse sliding retraction has become part of general orthodontic treatment. But compared to the emphasis on successful anchorage preparation, the control of anterior teeth axis has not been emphasized enough. Methods: A 3-D finite element Base model of maxillary dental arch and a Lingual tipping model with lingually inclined anterior teeth were constructed. To evaluate factors influencing the axis of anterior teeth when OMI was used as anchorage, models were simulated with 2 mm or 5 mm retraction hooks and/or by the addition of 4 mm of compensating curve (CC) on the main archwire. The stress distribution on the roots and a 25000 times enlarged axis graph were evaluated. Results: Intrusive component of retraction force directed postero-superiorly from the 2 mm height hook did not reduce the lingual tipping of anterior teeth. When hook height was increased to 5 mm, lateral incisor showed crown-labial and root-lingual torque and uncontrolled tipping of the canine was increased.4 mm of CC added to the main archwire also induced crown-labial and root-lingual torque of the lateral incisor but uncontrolled tipping of the canine was decreased. Lingual tipping model showed very similar results compared with the Base model. Conclusion: The results of this study showed that height of the hook and compensating curve on the main archwire can influence the axis of anterior teeth. These data can be used as guidelines for clinical application.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1469-1470
• /
• 2013