• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.328-333
• /
• 1998

Lattice-matched InAIAs epilayers were grown on (001) InP substrate by low pressure metalorganic chemical vapor deposition. The effects of growth conditions on the properties of InAIAs were analyzed, and InGaAs/InAIAs single and multiple quantum wells were successfully grown. It was observed that the optical property of InAIAs epilayers was improved in the temperature range of 620~$700^{\circ}C$ as the growth temperature increased due to the reduction of oxygen incorporation, however, the crystallinity decreased at temperatures higher than $750^{\circ}C$ due to the degraded crystallinity of the bufter layers. The enhanced incorporation of AI into epilayer was observed at high $AsH_3$flow rates and it was explained in terms of the differences in bond strengths of AI-As and In-As. The measured photoluminescence peak energies from InGaAs/InAIAs single quantum wells were consistent with the calculated ones based on transfer matrix method. High-order satellite peaks and fine thickness fringes were observed by high-resolution x-ray diffraction, implying that the high-quality multiple quantum wells with abrupt heterointerfaces were grown.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.256-262
• /
• 1998

산소이온전도체 13mol% CaO안정화 $ZrO_{2}$에 대한 $AI_{2}$$O_{3}$의 첨가효과를 살펴보기 위해 출발원료분말을 ($Zr_{0.87}$ $Ca_{0.13}$ O$1.87_{1-x}$ $AI_{2}$$O_{3}$)x,(x=0,0.01,0.02,0.03,0.05)와 같은 조성이 되도록 공침법으로 합성하고 $1400^{\circ}C$에서 소결시켜, $AI_{2}$$O_{3}$의 첨가에 따른 /grain size의 변화, $AI_{2}$$O_{3}$의 형태 및 존재위치, 소결밀도의 변화, 그리고 저항률의 변화를 살펴보았다. 그 결과, 결정립의 크기는 1mol% A $I_{2}$$O_{3}$첨가까지는 증가하였고, 2mol%첨가이상에서는 입계로 석출하기 시작한 $AI_{2}$$O_{3}$의 pinning효과에 기인되어 감소하였다. 또 1mol% $AI_{2}$$O_{3}$첨가시에 격자상수값의 급격한 감소가 보여지고, 그 이상에서는 변화가 별로 없어 13mol%CaO안정화 $ZnO_{2}$의 고용도한은 최대 1mol%임을 알 수 있었다. 전기전도도 또한 1mol% $AI_{2}$$O_{3}$첨가시에 증가됨을 나타냈다. $ZrO_{2}$에의 고용도한까지의 $AI_{2}$$O_{3}$첨가는 결정립성장을 촉진시키며 밀도값의 증대를 가져오고 전기전도도의 증가를 가져오는 긍정적인 효과를 나타냈다.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.350-355
• /
• 2007

The effect of moisture in flue gas on SCR reaction of NMO (Natural Manganese Ore) was studied. The experiments were performed over NMO with NO, $NH_3$ at independent condition or simultaneous condition. $NH_3$ can be oxidized at low temperature by the lattice oxygen in NMO catalyst. The concentration of NO and $NO_2$ by $NH_3$ oxidation with moisture is higher above $300^{\circ}C$ than that without moisture. Moisture would competitively adsorb with NO and $NH_3$ on NMO catalyst. It caused poor NOx conversion to compete against $H_2O$. Besides the NOx conversion efficiency was reduced at below $250^{\circ}C$ because of the dipped $H_2O$ competitively adsorbed $NH_3$. The reactivity of NMO varied with the calcination temperature and the optimum calcination temperature was $400^{\circ}C$ regardless $H_2O$.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1069-1074
• /
• 2008

In this work, we made a study for the 3D SAM formation of octanethiol, decanethiol, and dodecanethiol on copper nanoparticles and we verified stability of the copper particle depending on the ratio of dodecanethiol to copper. The reaction was performed in a one-phase system under nitrogen atmosphere and the thiolated copper particles could be obtained by centrifugation. We could confirm that the nanoparticles consisted of a spherical shape of 3~6 nm from TEM images. FT-IR, XPS and TGA results showed that alkanethiols were chemisorbed via thiol group and the packing density of the alkanethiols on copper surface increased with the alkyl chain lengths. XRD patterns gave us useful information about superlattice formations. Finally, $Cu_2O$ was formed when the molar ratio of dodecanethiol to copper is less than unity and copper nanoparticles formed more compact 3D SAMs when the molar ratio of dodecanethiol to copper was 1.25.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.513-518
• /
• 2005

Catalytic oxidation of toluene on the manganese oxide catalysts and manganese-cerium oxide catalysts was investigated. The catalysts were characterised by X-ray diffraction(XRD), thermo gravimetric analyzer(TGA), toluene-temperature program reduction(Toluene-TPR). We found that the optimal manganese content was 18.2 wt.% and the optimal cerium content was 10.0 wt.% at catalytic oxidation of toluene. It is shown that ceria improves the activity of manganese oxide phases. From the XRD results, it was estimated that $MnO_2$ phase was active site in the monometallic and bimetallic catalysts. From the TGA and Toluene-TPR results, it show that ceria improves the mobility of the lattice oxygen, adequate oxidation state of the active phase, reduction ability at low temperature, and re-oxidation of the active site.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.151-151
• /
• 2007

최근에 에피 성장된 ZnO는 UV-LED, 화학적-바이오센서와 투명전도 전극에 많은 관심을 받고 있다. 고 품질의 ZnO는 Metal-organic chemical vapor deposition(MOCVD), Pulsed laser deposition(PLD), molecular beam epitaxy(MBE), 그리고 마그네트론 스퍼터링법에 의해 성장이 이루어지고 있다. 대부분의 ZnO는 사파이어, 싫리콘과 같은 이종 기판 위에 성장되고 있으며, Heteroepitaxy로 성장된 ZnO 박막은 기판과 박막사이의 격자상수, 열팽창계수 차이로 인해 높은 결함 밀도를 보이고 있다. 이러한 문제점은 광전자 소자 응용에 있어 여러 가지 문제점을 야기 시킨다. 이와 같은 문제점을 해결하기 위해 박막과 기판사이에 저온 버퍼층을 사용하거나 같은 물질의 버퍼층을 사용하여 결할 밀도를 감소시키고, 높은 결정성을 가진 ZnO 박막을 성장시킨 결과들이 많이 보고되어지고 있다. 본 연구에서는 마그네트론 스퍼터링 법으로 저온 버퍼층 성장 없이 성장온도 만을 달리 하여 고품질의 ZnO 박막을 성장시켰다. ZnO 박막은 c-sapphire 기판위에 ZnO(99.9999%)의 타겟을 사용하여 $600{\sim}800^{\circ}C$ 온도에서 성장시켰고, 스퍼터링 가스로는 아르곤과 산소를 2:1 비율로 혼합하여 15mtorr의 압력에서 성장하였다. 이렇게 성장시킨 ZnO 박막은 Transmission Electron Microscopy (TEM), High-Resolution X-ray Diffraction (HRXRD), Low-temperature PL, 그리고 Atomic Force Microscopy (AFM)로 특성을 분석 하였다. ZnO 박막은 HRXRD (002) 면의 $\omega$-rocking curve운석 결과, $0.083^{\circ}$의 작은 FEHM을 얻었고, (102) 면의 $\varphi$-sacn을 통해 온도가 증가함에 따라 향상된 6-fold을 확인함으로새 에피성장됨을 알 수 있었다. 또한 TEM분석을 통해 $800^{\circ}C$에서 성장된 박막은 $6.7{\times}10^9/cm^2$의 전위밀도를 얻을 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.208-208
• /
• 2010

본 연구에서는 투명전도성산화막으로 적용 가능한 Ga이 도핑된 ZnO(GZO)의 성장 및 후처리 과정에 따른 구조적, 전기적, 광학적 특성을 관찰하였다. GZO 박막은 상온과 $200^{\circ}C$, 50~250 mTorr (50 mTorr 단계)에서 RF 마그네트론 스퍼터법으로 증착하였다. 이와 같은 조건에서 성장 된 박막의 특성을 분석하여 최적의 온도 및 작업압력에서 RF power를 변화시켜 박막을 성장한 후 질소 및 수소를 이용한 후처리 공정을 통하여 GZO 박막을 제작, 각 조건에 따른 구조적, 전기적 및 광학적 특성 변화를 조사하였다. XRD 측정에서, 열처리 전 시료에서는 GZO (002) 상의 Bragg-Angle 위치가 호스트 물질 ZnO의 기준위치보다 낮은 각도 쪽에서 나타났으며, 이는 Ga이 Zn와 치환되지 못하고 격자 내에 침입형태로 존재함에 따른 것으로 판단된다. 열처리 이후 전반적으로 분위기 가스의 종류에 관계없이 결정성, 광투과율 및 전기적 특성이 향상되는 것이 관측되었다. 질소 분위기에서 열처리된 GZO 박막의 경우, 전반적으로 박막 증착 시 초기 작업압력의 증가에 따라 비저항이 증가하는 현상이 관측되었다. 반면, 수소 분위기에서 열처리된 박막에서는 박막 증착 초기 작업 압력이 증가함에 따라 비저항이 감소하는 경향이 관측되었다. 이러한 결과는 XPS(X-Ray Photoelectron Spectroscopy)로 분석한 결과, 질소 분위기에서 열처리된 GZO 박막은 O-H 결합이 Zn-O 결합에 비해 과도하지 않은 반면, 수소화 처리된 GZO 박막에서 Zn-O 결합에 비해 과도한 O-H 결합이 존재하기 때문으로 관측되었다. 그러한 이유는 O-H 결합이 GZO 박막 내 산소 결공($V_o$)과 밀접한 관계가 있기 때문이며, O-H 결합의 증가는 $V_o$-H 결합체의 증가를 의미하기 때문이다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.145-156
• /
• 1997

ZrO2 phase transformations depending on the type and amount of dopants and the sintering temperatures were studied for the 2 components (CaO-, Y2O3-, MgO-ZrO2) and the 3 components(MgO-ZrO2-Al2O3)ZrO2 powder by X-ray diffraction and Raman spectroscopy. In the CaO- and Y2O3-ZrO2 systems, as the CaO and Y2O3 contents increased to 6~15mol% and 3~15mol% respectively, we were not able to identify between tetragonal and cubic in the X-ray diffraction patterns. On the other hand, all Raman modes shifted to lower wavenumbers, decreasing in intensity and the number of bands, markedly. These phenomena were caused by tetragonallongrightarrowcubic phase transformation and interpreted by the breakdown of the wave vector selection rule(k=0) and the structural disorder associated with the formation of oxygen sublattice which was caused by the substitution between Zr4+ ion and Ca2+ or Y3+ ion in ZrO2 matrix. The monoclinic to cubic phase transformation occurred in 10mol% MgO-ZrO2 system. As the Al2O3 content increased from 0 to 20mol% in the MgO-ZrO2-Al2O3 systems, cubic phase transformed to monoclinic phase, this is because the MgO didn't play a role in a stabilizer because of the formation of the spinel(MgAl2O4) by the reaction between MgO and Al2O3, Also, the ZrO2 phase transformation was explained by the change of it's lattice parameters depending on the type and amount of dopants. Namely, as the amount of dopant increased to 10~13mol%, the axial ra-tio c/a came close to unity with increasing the lattice parameter a and decreasing the lattice parameter c. At that time, the tetragonallongrightarrowcubic phase transformation occurred.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.237-241
• /
• 2008

Hot-press sintering of AlN ceramics were carried out with $Y_2O_3$ as sintering additive at a sintering temperature $1,750{\sim}1,850^{\circ}C$. The effect of $Y_2O_3$ addition and sintering time on sintering behavior and thermal conductivity of AlN ceramics was investigated. $Y_2O_3$ added AlN showed noticeably higher denazification rate than pure AlN. The thermal conductivity of AlN specimens was promoted by the addition of $Y_2O_3$ in spite of the formation of YAG secondary phase in AlN grain boundaries and grain boundary triple junction because $Y_2O_3$ addition could reduced the oxygen contents in AlN lattice which is primary factor of thermal conductivity. Typically, the thermal conductivity of 5 wt% $Y_2O_3$ added specimen was dramatically improved by the increase of sintering time because the elimination of YAG secondary phases from the grain boundary due to the evaporation, as well as the grain-growth of AlN grains.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.43-51
• /
• 2005

This paper presents a waste load allocation study for the Incheon coastal environment, where a computer model, called AQUASEA, was applied. A finite element mesh was constructed and refined to cover the complicated geometry of Incheon coastal sea. The tidal height at 13 places of Incheon coastal boundary and flow of the Han River were given as an input condition to the tidal simulation. All pollution sources that discharge into Incheon coast were given as input data to the water quality simulation. The modeled parameters include tidal flow and COD(Chemical Oxygen Demand). The model was calibrated and verified with the field measurements. The model results showed reasonable agreements with field measurements in both tidal flow and water quality. Systems analysis showed that the pollution load from the Han River caused recognizable impacts on the water quality of Incheon coast from Yeomhwa waterway to northern area of Younghungdo. The loads from Incheon City affected water quality from the area below Youngjongdo to the area above Jawalldo. The discharge from the Sihwa Lake caused discernible impacts on the coastal zone from the dike outlet to the Incheon harbor, and pollution loads from Kyungkido affected the sea near the Oido. An effective water quality management plan was developed from the waste load allocation analysis of the validated model, that the maximum waste loads can be discharged without violating the water quality standard given in the Incheon coastal environment.