• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.3
• /
• pp.255-259
• /
• 1988

The distributing current is calculated on the infinit plane mattaric grattings for the TM waves. The matrix is larger, when the moment method is applied this structure. So, the moment method of this case is required large memory and long CPU times. Those boundary condition and the scattering formura are transformed into spectal domain. Taking account of the peridic structure, this formular is changed in a series form by using the Flouquet mode. By making a suitable basis function, this equation is expreseed matrix form. So the distributing current on the mattaric strip is able to caculate by using this equation. We calculate magnitude of the distributing current for varing these spaces, widthes and an angle of incident waves.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.9-20
• /
• 2019

A military aircraft generally includes external stores such as fuel tanks or external arming, depending on the purpose of the operation. When a store is dropped from a military aircraft at high subsonic, transonic, or supersonic speeds, the aerodynamic forces and moments acting on the store can be sufficient to send the store back into contact with the aircraft. This can cause damage to the aircraft and endanger the life of the crew. In this study, time accurate computational fluid dynamics (CFD) with dynamic moving grid (moving and deformable mesh, MDM) technique has been used to accurately calculate store trajectories. For the verification of the present numerical approach, a wind tunnel test model for the wing-pylon-finned store configuration has been considered and analyzed. The comparison results for the ejected store trajectories between the present numerical analysis and the wind tunnel test data at the Mach number of 0.95 and 1.2 are presented. It is also importantly shown that the numerical parameter of MDM technique gives significant effect for the calculated store trajectory in the low-supersonic flow such as Mach 1.2.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.350-359
• /
• 2007

Most large cut slopes of open pit mines, roadways, and railways are steeply inclined and composed with rocks that do not contain soils. However, these rock slopes suffer both weathering and fragmentation. In the case of steep slopes, falling rock and collapse of a slope may often occur due to surface erosion. Cast-in place concrete and rubble work are the most widely used earth structure-based pressure supports that act as restraints against the collapse of the rock slope. In order to overcome the shortcomings of conventional retaining walls, a segmental grid retaining wall is being used with connects precasted segments to construct the wall. In this study, laboratory model test was conducted to estimate deformation behavior of segmental grid retaining wall with configuration of rear strecher, height and inclination of the wall. In order to examine the behavior characteristics of a segmental grid retaining wall, this research analyzes the aspects of spacial displacement through relative displacement according to change in the inclination of the wall. Also, the walls behavior according to the formation and status of the rear stretcher which serves the role of transferring the load from the header and the stretcher which make up the wall, the displacement of backfill materials in the wall, and the location of the maximum load were surveyed and the characteristics of displacement in the segmental grid retaining wall were observed. The test results of the segmental grid retaining wall showed that there was a sudden increase in failure load according to the decrease in the wall's height and the size of the in was greatly decreased. Furthermore, it revealed that with identical inclination and height, the structure of the rear stitcher did not greatly affect the starting point or size of maximum horizontal displacement, but rather had a stronger effect on the inclination of the wall.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.101-107
• /
• 1992

디입그로잉용 냉간 압연 강판의 인장시험편에 디지탈 이미지 프로세싱 기술을 적용하여 표면에서의 변형 및 변형도 분포 구하는 방법을 제안한다. 이 방법은 시편표면상의 절점 위치를 이미지 프로세싱에 의해 결정하는 부분과 이들 위치점들을 이용하여 변형도를 계산하는 두 부분으로 구성되어,있다. 본 연 구에서는 시편상의 각 절점 위치를 구하기 위해 검은 원형의 반점들로 배열된 사각 형상의 격자를 사용하 였고, 이미지 프로세싱에 의해 구해진 절점 좌표를 이용하여 소재 표면에서의 변형 패턴, 주 변형도 분포, 유효 변형도 분포, 임계 변형도 등을 구하였다. 인장시험하는 동안 시편 표면상의 국부 네킹이 발생될때 까지 주변형도에 의한 변형 이력은 거의 적선적으로 변형되고 있기 때문에, 유효 변형도 값은 매 변형 단계마다 변형도 증분의 누적에 관계없이 거의 일정한 값을 보여주고 있었으며, 최대 유효 변형도는 시편의 중앙부에서 나타나고 있음을 알 수 있었다.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.81-93
• /
• 2001

Far ultraviolet IMaging Spectrograph (FIMS) should be designed to maintain its structural stability and to minimize optical performance degradation in launch and in operation enviroments. The structural and thermal analyzes of grating and grating mount system, which are directly related to FIMS optical performance, was performed using finite element method. The grating mount was made to keep the grating stress down, while keeping the natural frequency of the grating mount higher than 100 Hz. Transient and static thermal analyzes were also performed and the results shows that the thermal stress on the grating can be attenuated sufficiently. The optical performance variation due to temperature variation was with the allowed range.

• Ceramist
• /
• v.16 no.3
• /
• pp.27-34
• /
• 2013

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.60-61
• /
• 1999

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.192-197
• /
• 2017

Typical materials including concrete behaves with positive poisson's ratio when external force is applied. However, it is also available to manufacture a grating system which has negative poisson's ratio(Auxetic). In this study, double arrow type 2-D auxetic mesh was manufactured and mechanical behaviors were observed. Also, direct tensile tests of cementitious composites reinforced by auxetic mesh were performed and the results were compared with composites reinforced by typical mesh. The results showed that auxetic mesh more effectively restrained the deformation(shortening) of cementitious composites perpendicular to the load direction comparing with typical mesh.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.359-365
• /
• 2006

Wave-front error(WFE) is the main parameter that determines the optical performance of the opto-mechanical system. In the development of opto-mechanics, WFE due to the main loading conditions are set to the important specifications. The deformation of the optical surface can be exactly calculated thanks to the evolution of numerical methods such as the finite element method(FEM). To calculate WFE from the deformation results of FEM, another approximation of the optical surface deformation is required. It needs to construct additional grid or element mesh. To construct additional mesh is troublesomeand leads to transformation error. In this work, the moving least-squares approximation is used to reconstruct wave front error It has the advantage of accurate approximation with only nodal data. There is no need to construct additional mesh for approximation. The proposed method is applied to the examples of GOCI scan mirror in various loading conditions. The validity is demonstrated through examples.

• Composites Research
• /
• v.25 no.6
• /
• pp.211-216
• /
• 2012

FBG sensor peaks could be split due to polarization by shear strain, when the fiber optic sensors embedded or attached to the structure. For the fiber optic sensor packages, sensor grating has to be protected from shear strains. Also, pretension has to be applied to the sensor because compressive strain must be measured. Without pretension of sensor, the sensor does not show any change of signal until it is stretched. In order to mesure compressive and tensile strains, two fixing point and prestressed sensor need. In the fixing point, just holding the optical fiber cause slip between core and cladding in the fiber. A Fixation method of prestressed FBG sensors fixed with partially stripped fibers was developed. The sensor package has the prestress controllable fixtures at the fixing points. Prestress to the sensor imposed by controlling the two fixed points with bolts and nuts make it easy to measure compressive strain as well as tensile strain. The fiber optic sensor packages applied to the actual structure and the structural monitoring system using the package can be applied to safety through surveillance.