• Title/Summary/Keyword: 격자중심방법

Search Result 104, Processing Time 0.092 seconds

Development of a Parallel Cell-Based DSMC Method Using Unstructured Meshes (비정렬격자에서 병렬화된 격자중심 직접모사 기법 개발)

  • Kim, Hyeong-Sun;Kim, Min-Gyu;Gwon, O-Jun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.2
    • /
    • pp.1-11
    • /
    • 2002
  • In the present study, a parallel DSCM technique based on a cell-based data structure is developed for the efficient simulation of rarefied gas flows especially od PC clusters. Dynamic load balancing is archieved by decomposing the computational domain into several sub-domains and accounting for the number of particles and the number cells of each domain. Mesh adaptation algorithm is also applied to improve the resolution of the solution and to reduce the grid dependency. It was demonstrated that accurate solutions can be obtained after several levels of mesh adapation starting from a coars initial grid. The method was applied to a two-dimensioanal supersonic leading-edge flow and the axi-symmetric Rothe nozzle flow to validate the efficiency of the present method. It was found that the present method is a very effective tool for the efficient simulation of rarefied gas flow on PC-based parallel machines.

Design of Long Period Fiber Grating for EDFA gain flattening Filter (장주기 격자의 EDFA용 이득평탄화 필터 설계)

  • 김민성
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2003.05b
    • /
    • pp.5-9
    • /
    • 2003
  • 장주기 격자 필터를 이용한 EDFA용 이득평탄화 필터 설계에는 대역폭에 따라 한 개에서 세 개까지의 평탄화가 가능하다 이러한 필터 설계는 EDFA의 고유의 중심 파장, 크기, 대역폭에 대한 각 장주기 광섬유 격자의 중심 파장, 크기, 대역폭을 설정하여 이득평탄화를 최적화시킨다. 이득평탄화 필터의 설계를 위한 방법으로써 수동 설계통한 이득평탄화를 했으나, 신속하고 편리함을 위해 반자동 설계, 자동 설계 프로그램을 구현하였다. 이를 통한 이득평탄화 정도는, 수동이 0.38dB, 반자동 0.57dB, 자동 0.62dB 정도로 정밀한 이득평탄화를 얻을 수 있는 설계가 가능하였다.

  • PDF

Basin-scale DAD Analysis using Grid-based Rain Search Method (격자기반의 호우탐색기법을 이용한 유역기반의 DAD 분석)

  • Kim, Youngkyu;Yu, Wansik;Kim, Yeonsu;Jeong, Anchul;Jung, Kwansue
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.236-236
    • /
    • 2017
  • 본 연구에서는 강우의 시공간성을 파악할 수 있는 격자기반의 Average-point Tracking 프로그램을 이용하여 호우의 DAD(Depth-Area-Duration)를 분석하였다. IPCC 5차보고서에 따르면 1950년 이래로 다수의 극한 기상 및 기후 변화가 관측되었다. 그 중 일부는 인간의 활동과 관련된 것으로 많은 지역에서의 극한 호우 현상의 증가가 손꼽힌다. 이러한 극한 호우 현상 증가와 일부 저수지의 유출 증가 경향은 지역적 규모에서 홍수의 위험이 더 커졌음을 의미한다(Kim et al., 2016). 최근 이상기후 현상의 증가에 따른 강우양상의 변화로 게릴라성 집중 호우와 태풍의 빈도가 증가하고 있지만, 우리나라의 호우의 특성은 방위 및 진행방향에 따른 해석이 매우 복잡하여 강우를 정형화하기에 어려운 특징을 보인다. 또한 지속시간이 긴 호우의 경우에는 호우의 범위가 한반도 전체가 되는 특성 때문에 강우의 시 공간성과 관련된 관측 자료는 부족하며, 이러한 특성을 고려한 연구 또한 미진한 실정이다. 만약, 태풍과 같이 호우이동이 뚜렷한 경우, 기존의 적용되고 있는 유역중심의 DAD 분석 방법으로는 DAD 관계를 명확히 표현하기 어려우며 유역면적이 증가할수록 유역의 면적평균강우량의 오차도 증가하기 때문에 DAD 분석의 정확도는 낮아지게 된다. 따라서 본 연구에서는 호우의 형태와 이동을 고려하기 위해 시간에 따른 호우를 격자로 나누어 격자를 증가시키면서 면적평균최대강우량을 산정할 수 있는 Average-point Tracking 방법을 이용하여 DAD 분석을 실시하였다.

  • PDF

On the Accuracy and Efficiency of Calculation with Respect to the Grid Construction Methods for Unstructured Meshes (비정렬 격자계에서 격자계 구성방법에 따른 계산의 정확도와 효율에 관한 연구)

  • Kim S. R;Wang Z. J.
    • Journal of computational fluids engineering
    • /
    • v.9 no.1
    • /
    • pp.48-56
    • /
    • 2004
  • The numerical simulations with unstructured mesh by cell-centered and vertex-centered approaches were peformed for the quadrilateral and triangular meshes. For 2-D inviscid supersonic vortex flow, the simulation results and the analytic solution were compared and the accuracy was assessed. The calculation efficiency was measured by the parameter defined by the consumed CPU time multiplied by absolute error As a results, equilateral triangular mesh yielded the best accuracy and efficiency among the tested meshes. Cell-centered approach gives a little better efficiency than vertex - centered approach.

Analysis of Rainfall-Runoff Modeling based on DEM Grid-size -Centering on the Seolma Stream Basin- (DEM 격자크기에 따른 강우-유출 모델링(설마천유역을 중심으로))

  • Lee Jong-Kyu;Jang Hong-Jun;Choi Byung-Lyul
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.1169-1173
    • /
    • 2005
  • 자연현상의 강우와 유출관계를 규명하는 일은 상당히 복잡하고 어려우며 대부분의 하천이 충분한 수문정보가 부족하기 때문에 수문학적인 문제의 해결을 위한 보다 정확하고 신속한 방법이 필요하다. 지리정보시스템 (Geographical Information Systems; GIS)은 강우-유출 등 수문학적 모델링에 있어서 많은 새로운 방법을 연구할 수 있다. 우리나라 소하천 유역은 아직 수위나 유량 관측이 행해지지 않은 미계측유역이 있어 홍수시 정확한 유출량 추정이 어려운 실정이다. 이에 본 연구에서는 GIS와 WMS를 이용하여 지형특성인자값을 산정하고, 유역특성인자들을 IHP 대표유역인 설마천 유역에 적용하여 DEM 격자크기별 지형특성인자값을 비교하고, HEC-HMS 수문모형을 이용하여 유출수문곡선을 모의하고 이 결과와 실제 수문곡선과의 비교를 통하여 설마천 유역의 적정한 DEM 격자크기를 결정해 보고자 한다.

  • PDF

A Study of Image Characteristics due to Focus-Grid and Head Phantom Decentering from the Armorphos Silicon Thin Film Transistor Detector the Fixed Focus-Grid is Applied (고정식 초점형 격자가 적용된 비정절 실리콘 평판형 검출기에서 초점-격자와 두부 팬텀의 중심 변위에 의한 화질 특성에 관한 연구)

  • Choi, Jun-Gu;Kim, Byeong-Gi;Cha, Seon-Hwa;Kim, Gyeong-Su
    • Korean Journal of Digital Imaging in Medicine
    • /
    • v.9 no.1
    • /
    • pp.7-15
    • /
    • 2007
  • This study aim to investigate image characteristics due to focus-grid and head phantom decentering from the armorphos silicon thin film transistor detector the fixed focus-grid is applied, wish to propose right use method of digital medical equipment. Acquired image according to focus-grid and head phantom position decentering using head phantom on armorphos silicon thin film transistor detector the fixed focus-grid is applied. acquired image evaluate pixel value, histogram, plot profile, surface plot using NIB (Image J) image analysis program and compared decentering image with standard image. Mean value and standard deviation value of focus-grid lateral decentering and duplex decentering of focus-grid and head phantom decreased by ratio, consequently increase of horizontality, diagonal decentering. also, deteriorated contrast of image because frequency of high pixel value decreases fairly. according increases decentering, image distortion phenomenon was increase, by next time, pixel mean value of head phantom decentering was no big change but horizontality, diagonal, mean value and standard deviation value of pixel decreased by ratio. Even if increase pixel noise of image because wide latitude and post processing ability of digital detector, radiotechnologist can not recognize. Therefore, radiotechnologist must recognize correctly the photographing factors which increases pixel noise on the grid system installation digital detector and should exam.

  • PDF

효율적인 정박지 관리.운영 방안

  • Jo, Yun-Gyeong;Gwon, Wan-Beom;Hwang, Yeong-Jo;Kim, Jun-Seong
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2013.06a
    • /
    • pp.423-425
    • /
    • 2013
  • 정박선의 증가로 인해 VTS에서는 정박지를 선박에게 권고함에 있어서, 보다 효율적인 방법을 요하게 되었다. 정박지라는 한정된 범위 안에서 가능한 한 다수의 선박을 안전하게 투묘시킬 수 있는 방법을 모색하여 보았다. 각 항구의 정박지 권고 방식을 비교해보고, 포항항을 중심으로 격자형 정박지 권고 방식을 교신의 간소화와 함께 효율을 높일 수 있는 하나의 대안으로 제시하였다.

  • PDF

A methodology for considering wave overtopping in flooding analysis by using XP-SWMM (XP-SWMM을 이용한 침수 분석 시 월파를 고려하기 위한 방법론)

  • Sun, Dongkyun;Kang, Taeuk;Lee, Sangho
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.395-395
    • /
    • 2020
  • 연안 지역의 침수 모의에 관한 국내 연구들은 간단한 월파량 공식 및 조위와 강우만을 결합하여 모의하였거나, 강우 없이 조위와 월파만을 고려하여 모의한 경우가 대부분이었다. 그렇지만 연안 지역의 침수는 강우와 (조위 포함) 월파가 시간에 따라 변하면서 발생하므로, 두 외력조건을 고려하는 침수 모의가 필요하다. 이에 본 연구에서는 연안지역의 침수 분석 시 강우-유출 분석과 2차원 지표면 침수 해석이 가능한 XP-SWMM을 이용하여 강우와 월파의 시간 변화를 고려한 침수 모의 방법론을 제시하고자 한다. 우선 FLOW-3D 모형을 사용하여 연안 지역의 흐름 분석과 월파량 시계열을 산정하였고, XP-SWMM에 산정된 월파량 시계열을 입력하기 위해 해안가 지역에 절점을 생성하였다. 절점의 위치는 FLOW-3D 모형에서 월파량 시계열을 산정한 격자의 중심 위치이다. 월파량 시계열 산정 시 FLOW-3D 모형의 격자를 XP-SWMM에서 모두 고려하기에는 많은 시간이 소요되므로 3개의 격자를 묶어 하나의 절점으로 구현하였고, 3개의 격자에서 산정된 월파량 시계열의 합을 해당 절점에 반영하여 XP-SWMM으로 침수 모의를 진행하였다. 제시된 방법의 적절성을 검토하기 위해 강우와 월파가 동시에 발생한 태풍 차바 내습 시 부산에 위치한 마린시티에 적용하였다. 분석 결과, 한국국토정보공사에서 제공하는 침수흔적도와 모의 결과가 유사함을 확인하였다. 본 연구는 연안 지역의 침수 해석 시 XP-SWMM으로 강우와 함께 월파를 고려한 침수 모의 방법을 제시한 연구 사례로서 의의가 있다. 이는 XP-SWMM의 범용성과 호환성을 높이는 방법론이며, 실제 침수 현상과 가깝게 재현할 수 있다고 판단된다.

  • PDF

Development of a 3-D Viscous Flow Solver Based on Unstructured Hybrid Meshes (비정렬 혼합 격자계 기반의 삼차원 점성 유동해석코드 개발)

  • Jung, Mun-Seung;Kwon, Oh-Joon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.35 no.8
    • /
    • pp.677-684
    • /
    • 2007
  • In the Present Study, a 3-D viscous flow solver, based on unstructured hybrid meshses containing tetrahedra, prisms and pyramids, has been developed. A finite-volume discretization scheme is used for solving the compressible Navier-Stokes equations. A cell-vertex median dual volume is used for spatial discretization. The one-equation Spalart-Allmaras turbulence model has been adopted to evaluate the eddy viscosity. Validation were made by computing laminar and turbulent flows around a 3-D wing for steady flows and turbulent flows around an oscillating 3-D wing in harmonic motion for unsteady flows.

On the Accuracy and Efficiency of Cell-centered and Vertex-centered Approaches for Unstructured Meshes (비정렬 격자계에서 셀 중심 및 버텍스 중심 계산방법에 따른 계산의 정확도와 효율에 관한 연구)

  • Kim S. R.;Wang Z. J.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2003.08a
    • /
    • pp.25-30
    • /
    • 2003
  • The numerical simulations with unstructured mesh by cell-centered and vertex-centered approaches were performed for the quadrilateral and triangular meshes. For the 2-D incompressible supersonic vortex flow, the simulation results and the analytic solution were compared and the accuracy was assessed. The calculation efficiency was measured by the parameter defined by the consumed CPU time multiplied by absolute error, As a results, equilateral triangular mesh yielded the best accuracy and efficiency among the tested meshes.

  • PDF