• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1006-1009
• /
• 2013

In this paper, a new technique for image enhancement using cross-shaped median filter with edge-detection algorithm is proposed. It consists of simple hypothesis test for edge-detection, and makes use of the cross-shaped window. This method is applied to noise corrupted image and its results are compared with those of median filters. As for the experimental result, method of cross-shaped median filter is superior to other median filters.

• Composites Research
• /
• v.18 no.1
• /
• pp.16-22
• /
• 2005

Application fields on structural health monitoring of fiber Bragg gratings (FBGs) are gradually expanded even to a primary structure as well as a secondary structure and a specimen. For the reason, verification for the reliability of FBGs such as signal characteristics and mechanical strength becomes much more important. In this study, mechanical strength characteristics of FBGs with their fabrication process and reflectivity are investigated with various grating lengths. From the results of tension tests, it is shown that the mechanical strength of optical fibers decreases about $50\%$ just by jacket stripping and the amount of decrease is dependent on stripping methods. About $55\%$ of mechanical strength of stripped optical fibers decreases if gratings are formed in the core and it is regardless of grating lengths and reflectivity. However, the width of strength distribution increases relative to increases in reflectivity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1175-1183
• /
• 2010

A spacer grid assembly is one of the most important structural components in a Light Water Reactor(LWR) nuclear fuel assembly. In the case of the Zircaloy spacer grid assembly, the primary design consideration is to ensure that lateral dynamic crush strength of the spacer grid assembly is sufficient to resist design basis loads and thereby prevent seismic accidents, without a significant increase in the hydraulic head loss for the reactor coolant in the reactor core. In this study, factors affecting the lateral dynamic crush strength of a spacer grid assembly were analyzed by performing lateral dynamic crush tests and finite element analyses. Further, an effective and economical method to enhance the lateral dynamic crush strength of the spacer grid assembly is proposed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.74-86
• /
• 2021

The composite lattice structure is a structure that supports the required load with the minimum weight and thickness. Composite lattice structure is manufactured by the filament winding process using impregnating high-strength carbon fiber with an epoxy resin. Filament winding process can laminate and manufacture only structurally necessary parts, composite lattice structure can be applied to aircraft fuselages, satellite and launch vehicles, and guided weapons to maximize weight reduction. In this paper, the development and evaluation of the composite lattice structure corresponding to the entire process from design, analysis, fabrication, and evaluation of large-scale cylindrical and conical composites lattice structure were performed. To be applicable to actual projectiles and guided weapons, we developed a cylindrical lattice structure with a diameter of 2,600 mm and a length of 2,000 mm, and a conical lattice structure with an upper diameter of 1,300 mm, a lower diameter of 2,500 mm, and a length of 900 mm. The performance of the developed composite lattice structure was evaluated through a load test.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.433-441
• /
• 1986

본 연구에서는 인장시험과 인장시 변형율속도 변화와 온도변화를 주는 시험을 통하여 316스테인리스강에 있어서의 비탄성거동을 규명하여 가공경화에 대한 용질강화 효과를 시험하고, Voce형의 발전방정식(evolutionary equation)을 포함하는 Arrhenius 형의 구성식에 용질강화효과를 첨가하여 정확한 비탄성 해석을 기하고자 한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.328.2-328
• /
• 2001

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.257.2-257.2
• /
• 2003

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.210.1-210
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.261.1-261
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.309.1-309.1
• /
• 2003