• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.305-308
• /
• 2006

Magnetic flux leakage (MFL) pigs are traditionally used for the detection of gross corrosion on steel pipelines used for the transmission of natural gas. Alternative nondestructive evaluation (NDE) modalities are required for the detection of stress corrosion cracking (SCC) which tends to exist in colonies oriented axially along the length of the pipeline. This paper describes the use of multiphase rotating magnetic fields in the remote region of the probe as a possible SCC detection mechanism. Details of a prototype pig and test rig are given and the challenges associated with the finite element modeling of the device are discussed. Initial experimental results show that this novel NDE modality is sensitive to axially oriented tight cracks.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.7-13
• /
• 2002

BSCT 320${\times}$240 IRFPA detector module is implemented, which is a key component in uncooled thermal imaging systems. The detector module consists of two parts, infrared sensitive pixel array and read-out integrated circuit(ROIC). The BSCT 320${\times}$240 pixels are made by laser scribe process and 10-${\mu}m$ micro-bump to satisfy 50-${\mu}m$ pitch and 95-% fill-factor. The ROIC has been designed to electrically address the pixels sequentailly and to improve signal-to-noise ratio with single transistor amplifier, HPF, tunable LPF and clamp circuit. The fabricated hybrid chip of detector and ROIC has been mounted on the TEC built-in ceramic package for more stable operation and tested for lots of electrical and optical properties. The IRFA sample has shown successful properties and met with good results of fill-factor, detectivity and responsivity.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.31-37
• /
• 2003

The expanded uncertainties calculated by the application of GUM -approximation and Monte-Carlo simulation were compared about the model equation of one-point calibration which is widely used for the measurements and chemical analysis. For the comparisons, we assumed a set of artificial data at the various level of concentration and dispersion of t or normal distribution. Mistakes of more then 50 % was revealed at the values calculated by GUM-approximation in comparison with those of Monte-Carlo simulation because of the excess dispersion from t-distribution and non-linearity by division in the equation. In contrary, the mistake of calculation due to non-linearity of the equation was not observed in the level of detection limits with the equation of one-point calibration, because of the relatively large values of uncertainty in response.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.165-165
• /
• 2013

희토류 발광 물질은 4f 껍질에 위치하는 전자의 독특한 특성 때문에 발광 소자와 디스플레이에 그 응용성을 확장하고 있다. 본 연구에서는 고효율의 적색과 주황색 형광체를 합성하기 위하여 모체 격자 CaNb2O6에 희토류 이온인 유로퓸과 사마륨을 치환 고용하여 최적의 합성 조건을 조사하였다. Ca1-1.5xNb2O6:REx3+ (RE=Eu, Sm) 형광체 분말 시료는 고상반응법을 사용하여 활성제 이온인 Eu3+와 Sm3+의 농도비를 0, 0.01, 0.05, 0.10, 0.15, 0.20 mol 로 변화시키면서 합성하였다. 초기 물질 CaO, Nb2O5, Eu2O3와 Sm2O3을 화학 적량으로 측정하고, 400 rpm의 속도로 24시간 밀링 작업을 수행한 후에, 건조기 $60^{\circ}C$에서 28시간 건조하고, 시료를 막자 사발에서 갈아 세라믹 도가니에 담아 튜브형 전기로에서 분당 $5^{\circ}C$의 비율로 승온시켜 $500^{\circ}C$에서 5시간 동안 하소와 $1,100^{\circ}C$에서 6시간 소결하여 합성하였다. Eu3+가 도핑된 경우에, 발광 스펙트럼은 Eu3+ 이온의 농도비에 관계없이 강한 적색 발광 스펙트럼이 616 nm에서 관측되었다. 이외에도, 596 nm와 708 nm에서 상대적으로 발광 세기가 약한 주황색 발광과 적색 발광 신호가 검출되었으며, 541 nm에서는 매우 약한 녹색스펙트럼이 관측되었다. Eu3+ 이온의 농도비에 0.01 mol에서 0.15 mol로 증가함에 따라 주발광 신호의 세기는 점점 증가하였으며, 0.15 mol에서 최대 발광 세기를 나타내었다. Eu3+ 이온의 농도비가 0.20 mol 로 더욱 증가함에 따라 주 피크의 세기는 농도 소강 현상에 의하여 현저히 감소함을 보였다. 한편, 주된 흡광 스펙트럼은 279 nm에서 나타났는데, 이것은 전하전달밴드 신호이다. Sm3+가 도핑된 형광체 분말의 발광 스펙트럼은 모든 시료의 경우에 613 nm에서 강한 적주황색 발광 스펙트럼이 관측되었고, 상대적으로 세기가 약한 570 nm와 660 nm에 피크를 갖는 황색과 적색 발광 스펙트럼이 발생하였다. 흡광과 발광 스펙트럼의 최대 세기는 0.05 mol에서 나타났으며, Sm3+ 이온의 농도비가 더욱 증가함에 따라 흡광과 발광 세기는 급격하게 감소하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.166-166
• /
• 2013

최근에 희토류 이온이 도핑된 형광체를 발광 소자, 레이저, 섬광재료, 광섬유, 촉매, 디스플레이와 같은 다양한 분야에 응용하기 위한 연구에 상당한 관심이 집중되고 있으며, 희토류 이온이 도핑된 발광 물질은 음극선관, 램프 조명, 플라즈마 디스플레이, X선 검출기, 전계 방출 디스플레이 소자를 포함한 다양한 영역에 응용되고 있다. 본 연구에서는 고상 반응법을 사용하여 발광 효율이 높은 적색과 주황색 형광체를 제조하고자 서로 다른 활성체 이온 Eu3+, Sm3+의 농도를 변화 시키면서 두 종류 Ca1-1.5xTa2O6:Eux3+와 Ca1-1.5xTa2 O6:Smx3+ 형광체 분말을 합성하였다. 특히, 활성제 이온의 농도비에 따른 형광체 분말의 결정 구조, 표면 형상, 입자의 크기, 흡광과 발광 특성을 측정하였다. 그림은 활성체 이온의 함량비를 달리하여 합성한 Ca1-1.5xTa2O6:Eux3+, Ca1-1.5xTa2O6:Smx3+ 형광체 분말에서 측정한 흡광(photoluminescence excition) 스펙트럼의 결과를 나타낸 것이다. 여기 파장 399 nm로 여기 시킨 Ca1-1.5xTa2O6:Eux3+ 형광체 분말의 경우에, 발광 세기가 가장 강한 617 nm의 주 피크가 관측되었다. 또한, 여기 파장 410 nm로 여기 시킨 Ca1-1.5xTa2O6:Smx3+ 형광체 분말의 경우에는 발광 세기가 가장 강한 주 피크는 609 nm에서 나타났다. 실험 결과로부터, Eu3+와 Sm3+ 이온이 각각 도핑된 CaTa2O6 형광체의 경우에는 색 순도가 높은 파장과 발광 세기는 Eu3+ 이온인 경우에 0.15 mol, Sm3+ 이온이 도핑되는 경우에는 0.05 mol이 최적의 합성 조건임을 알 수 있었다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.6
• /
• pp.1237-1246
• /
• 2020

Recently, several cache side channel attacks have been proposed to extract secret information by exploiting design flaws of the microarchitecture. The Flush+Reload attack, one of the cache side channel attack, can be applied to malicious application attacks due to its properties of high resolution and low noise. In this paper, we proposed a detection system, which detects the cache-based attacks using the PCM(Performance Counter Monitor) for monitoring CPU cache activity. Especially, we observed the variation of each counter value of PCM in case of two kinds of attacks, Spectre attack and secret recovering attack during AES encryption. As a result, we found that four hardware counters were sensitive to cache side channel attacks. Our detector based on machine learning including SVM(Support Vector Machine), RF(Random Forest) and MLP(Multi Level Perceptron) can detect the cache side channel attacks with high detection accuracy.

• Clean Technology
• /
• v.16 no.1
• /
• pp.26-32
• /
• 2010

The low temperature pyrolysis of polypropylene (PP), polystyrene (PS) and polypropylene-polystyrene (PP-PS) mixture in a batch reactor at the atmospheric pressure and $450^{\circ}C$ was conducted to investigate the synergy effect of PP-PS mixture on the yield of pyrolytic oil. The pyrolysis time was varied from 20 to 80 mins. The products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of Ministry of Knowledge Economy. The analysis of the product oils by GC/MS(Gas chromatography/Mass spectrometry) showed that new components were not detected by mixing of PP and PS. There was no synergy effect according to the mixing of PP and PS. Conversions and yields of PP-PS mixtures were linearly dependent on the mixing ratio of samples except for heavy oil yields. Heavy oil yields showed almost constant regardless of the mixing ratio.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.201-211
• /
• 2008

The treatment efficiency of PCBs containing wastes has been investigated. The samples treated by electron beam and de-chlorination method were analyzed to verify the byproducts before treatment and after treatment. In the treated samples by electron beam irradiation, PCBs were not detected by comparing the peak matching using the Korean official waste test method. On the other hand, PCBs congeners were detected by analyzing individual isotope method using HRGC/HRMS. Most of PCB congeners in waste were decomposed to 3-chlorobiphenyls, lower chlorinated congener produced during the treatment of electron beam. In the chemical dechlorination treatment, it was found that the concentrations of PCBs in treated samples were lower than those of regulation criteria in Waste & POPs management law and the after treatment concentration were satisfied to the regulation criteria. Also, dioxins were not observed after the physio-chemical treatment processes of PCBs containing wastes.

• KSBB Journal
• /
• v.22 no.5
• /
• pp.288-296
• /
• 2007

Monascus pilosus (KCCM 60160) in submerged culture was optimized based on culture medium and fermentation conditions. Monacolin-K (Iovastatin), one of the cholesterol lowing-agent which was produced by Monascus pilosus may maintain a healthy lipid level by inhibiting the biosynthesis of cholesterol. Plackett-Burman design and response surface method were employed to study the culture medium for the desirable monacolin-K production. As a result of experimental designs, optimized production medium components and concentrations (g/L) were determined on soluble starch 96, malt extract 44.5, beef extract 30.23, yeast extract 15, $(NH_4)_2SO_4$ 4.03, $Na_2HPO_4{\cdot}12H_2O$ 0.5, L-Histidine 3.0, $KHSO_4$ 1.0, respectively. Monacolin-K production was improved about 3 times in comparison with shake flask fermentation of the basic production medium. The effect of agitation speed (300, 350, 400 and 450 rpm) on the monacolin-K production were also observed in a batch fermenter. Maximum monacolin-K production with the basic production medium was 68 mg/L when agitation speed was 500 rpm. And it was found that all spherical pellets (average diameter of $1.0{\sim}1.5mm$) were dominant during fermentation. Based on the results, the maximum production of 185 mg/L of monacolin-K with the optimized production medium was obtained at pH (controlled) 6.5, agitation rate 400 rpm, aeration rate 1 vvm, and inoculum size 3%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.338-345
• /
• 2009

Scaled-up low-trans shortening (LTS) was produced by lipase-catalyzed interesterification. Blend of rice bran oil (RBO), palm stearin (PS) and high oleic sunflower seed oil (HO) with 1:2:0.9 (w/w/w) ratio was interesterified using immobilized lipase from Thermomyces lanuginosus (TLIM) in the batch type reactor at $65^{\circ}C$ for 24 hr, and physicochemical melting properties of LTS were compared with commercial shortening. Solid fat content (SFC) of commercial shortening (used as control) and LTS was similar at 9.56 and 8.77%, respectively, at $35^{\circ}C$. Major fatty acids in LTS were C16:1 (33.7 wt%), C18:1 (45.7 wt%) and C18:2 (13.4 wt%). Trans fatty acid content in the commercial shortening (4.8 wt%) was higher than that of LTS (0.5 wt%). After reverse-phase HPLC analysis, major triacylglycerol (TAG) species in LTS were POO, POP and PLO. Total tocopherol, ${\gamma}$-oryzanol and phytosterol contents in the LTS were 12.37, 0.43 and 251.38 mg/100 g, respectively. Hardness of LTS was similar to that of commercial shortening. Also, x-ray diffraction analysis showed coexistence of ${\beta}'$ and ${\beta}$ form in the LTS.