• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.395-402
• /
• 2015

In this paper, we propose an efficient gait trajectory generation method for the static stair climbing of a quadruped robot with mechanism of insectile legs, which has no collision with staris. First, we derive the kinematic and inverse models of a quadruped robot using the algebraic and geometrical methods, respectively. In the proposed method, we generate the stair locomotion trajectory of a sine wave after lifting a leg from the start position, and then determine the coefficient of the generated trajectory to avoid the collision with stairs. In addition, we make the gait sequence for the stable stair locomotion. Finally, we verify the effectiveness and applicability of the proposed stair locomotion method through computer simulations.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.1-10
• /
• 2005

This paper proposes a novel fault-tolerant gait planning of a hexapod robot considering kinematic constraints. The failure concerned in this paper is a locked joint failure for which a joint in a leg cannot move and is locked in place. It is shown that the conventional fault-tolerant gait of a hexapod robot for forward walking on even terrain may be fallen into deadlock, depending on the configuration of the failed leg. For coping with such deadlock situation, a novel fault-tolerant gait planning is proposed. It can avoid deadlock by adjusting the position of the foot trajectory, and has the same leg sequence and stride length as those of the conventional fault-tolerant gait. To demonstrate the superiority of the proposed scheme, a case study is presented in which a hexapod robot, having walked over even terrain before a locked joint failure, could avoid deadlock and continue its walking by the proposed fault-tolerant gait planning.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.209-216
• /
• 2007

In this paper, we embodied posture-stabilization and dynamic gait in a walking robot. 10 RC servo motors are used to operate joints. And the joints have enough moving ranges suitable in any walking pattern. Each joint trajectory is generated by cubic spline interpolation method and the stability of the trajectory is verified by using Zero Moment Point from the robot modeling. To avoid complex structure and expression, Zero Moment Point of the biped robot used angular acceleration is suggested. To measure the stability of the biped robot, Tilt sensor and gyro sensor are used. Finally, Personal Computer is used computer monitoring and data processing. Most of computation, such as 10 RC servo motor control, joint trajectory generating, ZMP compensation, sense measuring, etc, was used Digital Signal Processor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.1039-1048
• /
• 2015

In this paper, we propose an efficient stair locomotion method for a quadruped robot with mechanism of insectile legs using genetic algorithm(GA). In the proposed method, we first define the factors and the reachable region for the stair locomotion. In addition, we set the gene and the fitness function for GA and generate the gait trajectory by searching the landing position of a quadruped robot, which has the minimun distance of movement and the optimal energy stability margin(ESM). Finally, we verify the effectiveness and superiority of the proposed stair locomotion method through the computer simulations.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.603-609
• /
• 2010

This paper introduces an objects recognition algorithm based on SURF(Speeded Up Robust Features) and GP(Genetic Programming) based gaits generation. Combining both methods, a recognition based intelligent walking for quadruped robots is proposed. The gait of quadruped robots is generated by means of symbolic regression for each joint trajectories using GP. A position and size of target object are recognized by SURF which enables high speed feature extraction, and then the distance to the object is calculated. Experiments for objects recognition and autonomous walking for quadruped robots are executed for ODE based Webots simulation and real robot.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.749-754
• /
• 2009

Two gait generation methods using GP(genetic programming) and CPG(Central Pattern Generator) are compared to develop a fast locomotion for quadruped robot. GP based technique is an effective way to generate few joint trajectories instead of the locus of paw positions and lots of stance parameters. The CPGs are neural circuits that generate oscillatory output from a input coming from the brain. Optimization for two proposed methods are executed and analysed using Webots simulation for the quadruped robot which is built by Bioloid. Furthermore, simulation results for two proposed methods are experimented in real quadruped robot and performances and motion features of GP and CPG based methods are investigated.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.115-123
• /
• 2004

This paper deals with the gait optimization of via points on biped robot. ZMP(Zero Moment point) is the most important index in a biped robot's dynamic walking stability. To stable walking of a biped robot, leg's trajectory and a desired ZMP trajectory is required, balancing motion is solved by FDM(Finite Difference Method). In this paper, optimal index is defined to dynamically stable walking of a biped robot, and genetic algorithm is applied to optimize gait trajectory and balancing motion of a biped robot. By genetic algorithm, the index of walking parameter is efficiently optimized, and dynamic walking stability is verified by ZMP verification equation. Genetic algorithm is only applied to balancing motion, and is totally applied to whole trajectory. All of the suggested motions of biped robot are investigated by simulations and verified through the real implementation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.305-311
• /
• 2012

In this paper, we propose a gait generation method for quadruped robots using the xz-axis sway of the quadruped robot, which minimizes the shake of the quadruped robot and maximizes the stability margin. In the proposed method, the gait is generated based on wave gaits and the stability analysis uses the body tilt information of the quadruped robot according to the leg's height of leg. In addition, to reduce the impact on the body caused by the z-axis sway while walking, the proposed method generates the smooth walking movement trajectory with less impact by using Fourier series. Finally, to verify the applicability and effectiveness of the proposed method, we carry out the computer simulations and the real walking experiments with the implemented quadruped robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.10
• /
• pp.890-897
• /
• 2002

This paper deals with the reduction of trajectory tracking error by changing the initial postures of a biped robot. Gait of a biped robot depends on the constraints of mechanical kinematics and the initial states including the posture. Also the dynamic walking stability in a biped robot system is analyzed by zero moment point(ZMP) among the stabilization indices. Path trajectory, in which knee joint is bent forward like human's cases, is applied to most cases considered with above conditions. A new initial posture, which is similar to bird's gait, is proposed to decrease trajectory tracking error and it is verified through real experimental results.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.51-59
• /
• 2011

This paper is concerned with locomotion of dog-like quadruped robots that can adapt to various terrains, mainly dealing with implementation methods and characteristics of static and dynamic gaits. To this end, a 12-DOF robot is built in house, motional trajectories of its body and feet are generated mimicking biological life, and the corresponding leg joint angles are analytically obtained by inverse kinematics. Such joint angle data are then applied to the robot's ADAMS model for computer simulations so that the planned walk and trot gaits are both confirmed dynamically stable. However, contrary to the simulation results, previous trot patterns showed unstable behavior during experiments. This problem led us to analyze the reason, and in the course we discovered the importance of maximally utilizing the concept of WSM rather than ZMP and therefore reducing the gait period to secure the stability of dynamic gaits such as trot.