• Journal of Korean Association for Spatial Structures
• /
• v.7 no.1 s.23
• /
• pp.45-53
• /
• 2007

Recently, high-rise base isolated building structures with shear keys are often constructed in Japan which frequently occurs earthquakes. High-rise buildings are less damaged because those buildings have longer natural period than md or low rise buildings. The shear key is device that prevents the base isolators operating by the wind loads not by the earthquake loads. In case of big base shear force acts on the shear keys by earthquake, this device is broken and base isolator is operated. Therefore, seismic intensities play a role in acting on the shear keys. If wind loads are hither than the earthquake loads, the shear keys designed by wind loads are not operated in earthquakes. So, the requirements of shear keys in high-rise base isolated building structures must be examined in Korea with moderate seismic legions. In this study shear keys are applied with 5 and 15 stories base isolated building structures and investigated their dynamic responses to original and 1/2 scale downed El Centre NS(1940) ground motions. The results show that the yield shear forces of the shear keys affect significantly the dynamic behavior of base isolated building structures

• Cement Symposium
• /
• s.48
• /
• pp.43-48
• /
• 2021

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.391-400
• /
• 2019

In the case of fire, a structure loses its original stiffness due to the temperature rise, and the load bearing capacity decreases. The loss of structural strength increases with increasing fire time of the structure. To prevent the collapse of buildings, it is very important to understand whether or not the members are damaged. On the other hand, there is insufficient data to be a guideline for diagnosing and evaluating the residual strength of the members in Korea. Therefore, this study examined the resistance performance by Finite-Element-Analysis of composite beams, which are composite structures among structural members. Composite beam modeling was carried out based on the model used in the Electrical Penetration Room (EPR) in cooperation with KEPCO. The heat transfer analysis and structural analysis of the critical phase were performed using ANSYS, a finite element analysis program. ANSYS was used to perform heat transfer analysis and structural analysis at the static analysis. To analyze the residual performance, the temperature distribution of the composite beam and the maximum displacement result of the heat-affected structure analysis were derived and the experimental data and the structural analysis result data were compared and analyzed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.243-253
• /
• 2011

This paper describes an analytical study on seismic performance of domestic reinforced concrete (RC) school building not designed by seismic provision. The seismic index and the seismic performance of the building were evaluated through Japanese standard and Midas Gen, respectively. Seismic index (Is) of the RC school buildings in the X-direction is below 0.4. Based on the seismic index, for seismic-strengthening the building, infill shear wall or steel brace with a capacity of 1,300 kN was used. According to nonlinear static analysis results, the contribution of the seismic-strengthening to the shear resistance of the school building was measured to be greater than 30%. However, as expected, shear strength of school building strengthened with infill wall dropt rapidly after peak load and much narrower ductile behavior range was observed compared to steel brace strengthened building. Also, the building strengthened with steel brace showed 30% larger spectral displacement than that strengthened with infill shear wall. In nonlinear dynamic analysis, for the time history analysis, the maximum displacement showed tendency to decrease as amount of reinforcement increased, regardless of strengthening method. It was recommended that variable soil properties and earthquake record should be considered for improving seismic performance of buildings in seismic zone.

• Computational Structural Engineering
• /
• v.17 no.1
• /
• pp.25-33
• /
• 2004

쉘은 곡률을 가지는 얇은 구조물로 정의된다. 자동차를 비롯하여 항공기, 우주 발사체, 인공위성, 선박 등의 운송수단과 건축물의 돔(done)과 같이 공간을 효율적으로 활용하고 동시에 경량화를 확보할 필요가 있는 경우에 쉘은 널리 사용되는 구조물이다. 쉘 이론은 1960년대까지는 전문가의 영역에 속해 있는 학문이었고 구조역학을 전공한 사람들에게도 다루기 어 려운 구조물로 인식되어 왔다. 실제 다양한 쉘의 거동은 역학과 수학의 폭넓은 지식을 요구하고 학문으로서도 그 속에서 평생을 보낼 만큼 매력적이고 어려운 부분들을 포함하고 있다고 생각된다.(중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.203-211
• /
• 2001

고층구조물의 해석에 사용되는 ETABS와 같은 상용프로그램은 해석의 단순화를 위하여 강막가정을 사용하게 된다. 이와 같은 강막가정은 일반적으로 바닥판의 휨 강성과 보의 편심효과를 무시하게 된다. 이러한 가정은 골조구조물의 정적해석에 대해서는 정당한 결과를 얻을 수 있으나 동적해석의 경우에는 바닥판의 휨 강성과 보의 편심효과가 구조물의 횡 방향 거동에 주요한 영향을 미치게 된다. 그러나 바닥판의 영향과 보의 편심효과를 고려하기 위해서는 유한요소의 특성상 바닥판과 보를 여러 개의 요소로 나누어야 하며, 이로 인하여 해석과 구조물의 모형화에 많은 시간이 소요되는 단점이 발생하게 된다. 본 논문에서는 이러한 단점을 보완하기 위하여 부분구조기법과 대형요소를 사용한 효율적인 모형화 방법에 대하여 연구하였다. 또한 최종적으로 각 층에 대하여 강막가정을 적용하여 층 당 3개의 자유도만을 고려하는 막대모델을 제안하였다. 본 논문에서는 제안한 모형화기법의 정당성을 검토하기 위하여 구조물의 응답을 비교하였다.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.15-26
• /
• 2022

With the recent increase in old and dangerous buildings, the demand for technology in the field of structure demolition is rapidly increasing. In particular, in the case of structures with severe deformation of damage, there is a risk of deterioration in stability and disaster due to changes in the load distribution characteristics in the structure, so rapid structure demolition technology that can be efficiently dismantled in a short period of time is drawing attention. However, structural deformation such as unauthorized extension or illegal remodeling occurs frequently in many old structures, which is not reflected in structural information such as building drawings, and acts as an obstacle in the demolition design process. In this study, as an effective way to overcome the discrepancy between the structural information of old structures and the actual structure, access to actual structures through 3D modeling was considered. 3D point cloud data inside and outside the building were obtained through LiDAR and drone photography for buildings scheduled to be blasting demolition, and precision matching between the two spatial data groups was performed using an open-source based spatial information construction system. The 3D structure model was completed by importing point cloud data matched with 3D modeling software to create structural drawings for each layer and forming each member along the structure slab, pillar, beam, and ceiling boundary. In addition, the modeling technique proposed in this study was verified by comparing it with the actual measurement value for selected structure member.

• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.21-22
• /
• 1989

기계 및 건축, 토목 분야의 설계나 연구 부문에서 널리 쓰이고 있는 구조해석에는 유한요소해석 기법이 보편화된 실정이며, 간단한 구조물을 해석하기에도 수많은 계산작업을 필요로 하므로 수작업으로는 그 해석 결과를 얻어내기란 거의 불가능하며, 고속의 컴퓨터를 이용하여야만 그 결과를 얻을 수 있게 되었다. 이렇듯이 컴퓨터가 없는 구조해석은 상상할 수 없지만 그렇다고 초고속의 계산능력을 갖춘 소위 Super computer만 갖추고 있다고 해서 구조해석을 원활히 할 수 있느냐 하면 그것도 반드시 옳다고 할 수는 없다. 특히 요즘과 같이 각기 업무 특성에 맞는 컴퓨터들이 속속 개발되어 나오는 환경을 고려할 때 최적의 시스템 구성을 위해서는 과거에서 현재까지의 컴퓨터 이용추세를 돌이켜보고 앞으로의 발전방향을 예측해 보는 것은 의미있는 일이라고 하겠다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.247-250
• /
• 2010

최근 많은 건축가들이 파라메트릭 디자인 도구에 관심을 가지고 형태에 대한 다양한 실험을 하고 있는 것과는 달리, 구조 엔지니어들은 이에 적절하게 대응하지 못하고 있다. 현재 파라메트릭 모델과 구조해석 프로그램사이의 자료교환을 가능하게 하는 인터페이스가 없는 것이 주된 원인이다. 따라서 구조 엔지니어들도 자유롭게 파라메트릭 방법론의 장점을 활용한 모델을 생성하고, 그것을 구조해석에 바로 사용할 수 있도록 하는 일이 오늘날 구조계가 당면한 과제이다. 본 연구에서는 파라메트릭 모델로부터 구조해석 모델을 자동으로 생성하는 인터페이스의 실무 적용가능성을 살펴보기 위하여, 파라메트릭 디자인 도구의 특성과 확장성을 검토하고, 라이노를 기반으로 하는 구조해석 모델 생성 플러그인을 개발하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.391-399
• /
• 2019

In this study, an analytical method was proposed to correct the analysis results and minimize the errors between column shortening predictions and real values in high-rise buildings. In this regard, the construction sequence analysis of 41-story reinforced concrete buildings was performed and the results were compared to four assumed field measurements that were divided into the column and the core. The analysis correction was applied at a stage over the error limit in the column and at all stages in the core. Since the error occurred continuously after the analysis was corrected, additional corrections of the analysis resulted in a smaller error. By applying the proposed analytical correction method, it was confirmed that the long-term shortening value can be accurately predicted.