• Archives of design research
• /
• v.17 no.2
• /
• pp.311-322
• /
• 2004

The purpose of this study is to ascertain pattern design element in traditional palaces among those in the neighboring three nations of East Asia, notably Korea, China and Japan. The basic assumption underlying this study is that these northeastern Asian states have been developed a unique inter-cultural ties over long periods of time in history, culminating in their respective design cultures. Undoubtly the ultimate goal to be pursued, by so doing, has to be inquiry into the identical prototype of Korean pattern design element. In the West, the pattern is appreciated by an aesthetic level, but the East Asian pattern is a symbolic alphabet deeply rooted in religious and folk beliefs. The difference of the respective country comes from the expression style of the pattern the Chinese express the magnificent pattern with various color, the Korean do the moderate pattern with harmonious color with the nature and the Japanese do the stylized pattern with the material color. To sum up similarities and dissimilarities among the design element in traditional palaces of Korea, China, and Japan is as the following : It is to be noticed that the mainly common characteristics of the artistic design are 'naturalism', 'harmonious ideas 'and 'confucianism'. But the representation style of the design element is differed from the country.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.459-468
• /
• 2004

An experiment was conducted to establish comparison of ventulation efficiency in an enclosed and conventional growing-finishing pig house. The main results of the experiment are as follows : In the established temperature was sustained at the level of summer 24.8${\sim}$29.1$^{\circ}C$, winter 17.9${\sim}$23.1$^{\circ}C$ during the experimental period of enclosed growing-finishing pig house, and conventional growing-finishing pig house was at the lovel of summer 24.7${\sim}$32.3$^{\circ}C$, winter 14.5${\sim}$18.2$^{\circ}C$ during the experimental period respectively. As for the results of dertimental gas(ammonia) concentration ratio analysis, while the conventional pig house sustained of summer 9.3${\sim}$16.9 mg/$\ell$ level, enclosed growing-finishing pig house sustained of summer 7.9${\sim}$16.1 mg/$\ell$, and the latter one is lower than that of the conventional growing-finishing pig house. Air flow rate on the floor level which is the low part of pen and the active area of pigs in the enclosed growing and finishing pig house during winter was measured at 0 to 0.87 m/s at the 0.01 to 2.73 m/s at the maximum ventilation efficiency. As for breeding pigs in summer, the pigs from the conventional pig house weighed 100.2kg, on the other hand, the pigs from enclosed growing-finishing pig house weighed 107.3 kg ; the differnce between the two kinds was about 7 kg. This was because the most adequate environment, which was not influenced by the exterior atmosphere, was offered to the pigs from enclosed growing-finishing pig house, and all of this could reduce pigs stress effectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.242-253
• /
• 1998

South Korea has been producing asbestos over 60 years. The use of asbestos was over 50 years for production of asbestos slate and 27 years for asbestos friction materials including asbestos textile and brake-lining. Thus, it can be supposed that asbestos related diseases such as asbestosis, lung cancer and mesothelioma could be found in the vulnerable workers exposed to asbestos in 1955-1975, given the average latency period of 10-30 years. Asbestos was produced primarily by Japanese during World War II In Korea. The production of chrysotile peaked to 4,815 tons in 1944. From 1978 to 1984, 10,000 tons of asbestos were produced annually. However, the production was interrupted by raising labor costs and extinction of mine reserves, and finally they had to depend on import for the need of asbestos. In 1945, there were 16 asbestos mines, in total, with the addition of new asbestos mines in South Korea. Imports of asbestos was increased from 74,000 tons to 95,000 tons during the period of 1976 - 1992. But the imports was reduced to 88,000 tons in 1995. Since, in addition to the import of asbestos itself, the imports of asbestos products were increased as well and the accumulation of asbestos reached to 30,000 tons during the period of 1964 to 1993. In 1965, there was only one asbestos company with 207 employees. But the size of asbestos industry has been expanded so much that 118 asbestos companies could be found in 1993 with 1,476 workers. However, there was no record on the survey of asbestos concentration to which workers were exposed in any companies in 1983. The record of the air-borne concentration of the asbestos in textile working places in 1984 showed 6.7 fibers/cc by geometric mean(GM), but it was reduced to 1.2 fibers/cc in 1993. GMs of asbestos in working places for construction materials and asbestos textiles were also decreased from 1.7 fibers/cc to 0.55 fibers/cc during the period of 1984 - 1996.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.791-806
• /
• 2020

In this study, a block shear strength test was conducted to compare and analyze the strength and failure mode on the glued laminated timber, CLT, and Ply-lam CLT, which are mainly used for the construction of wood construction as engineering wood. Through this, the Ply-lam CLT manufacturing conditions for optimum production, such as the type of lamina, plywood, adhesive, and layer composition, were investigated. The results are as follow. Through block shear strength test, it showed high strength in the order of glued laminated timber, Ply-lam CLT and CLT. In particular, the shear strength of Ply-lam CLT, which is made of a composite structure of larch plywood and larch lamina, passed 7.1 N/㎟, which is a Korean industrial standards for block shear strength of structural glued laminated timber. In addition, in this study, there was no different in shear strength according to the adhesive type used for glulam, CLT, and Ply-lam CLT adhesion. However, in the case of Ply-lam CLT, the difference in shear strength of Ply-lam CLT was shown according to the type of lamina and plywood. The results showed high strength in the order of Larix kaempferi > Mixed light hardwood ≒ Pinus densiflora, sieb, et, Zucc plywood. The optimal configuration of Ply-lam CLT is when larch plywood and larch lamina are used, and it is decided that the adhesive can be used by selecting PRF and PUR according to the application. The results of block shear strength failure mode by type of wood based materials were analyzed. The failure mode showed shear parallel-to-grain for glulam, rolling shear for CLT, and shear parallel-to-grain and rolling for ply-lam CLT. This is closely related to shear strength results and is decided to indicate higher shear strength in Ply-lam CLT than in CLT due to rolling shear.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.109-118
• /
• 2010

This study aims to propose practical strategies for the new urban ideal of regeneration. A book review highlights the emergence of new trends of urbanization in knowledge-information industrial society beyond the new town Ideal of the industrial society. The meaning of ‘landscape’ in landscape urbanism represents not the visual and decorative pictures, but the dynamic process in the context of changes and evolutions. Also, knowledge-information industrial society and landscape have a meaning in the same context of flow and process with changes of velocity. Finally, these key words convey a meaning with the new urban trends of urbanization in knowledge-information industrial society in the context of value-oriented characteristics of dynamics and process. Urban regeneration is emerging as the new urban ideal in the knowledge-information industrial society, beyond the new town ideal of industrial society. It is in the same context as landscape urbanism with respect to green infrastructure buildings and designs for the transformation of urban surfaces covered with concrete and asphalt into the ecological surface, and of the ecological surfaces into the cultural surface that could be communicated with human beings. This research revealed the six strategies for urban regeneration as follows. The First, the strategies for the transformation of urban surfaces into ecological surfaces, the second, the strategies for the transformation of ecological surfaces into cultural surfaces, the third, the introduction of mixed and convergence land use, the forth, the transformation of former sites(e.g. military and factory) into urban parks, the fifth, the introduction of waterfront park zones that have the function of ecological and park-oriented mixed land use and, the sixth, the building and design of green infrastructure in the residential and commercial complex in CBD. These strategies call for the reforms of development laws and regulations to restrict building coverage ratio, building heights, and the introduction of park-oriented mixed zoning regulations. Another method for implementating the above listed strategies was the introduction of a strategic planning system instead of the traditional master plan system. This system uses a value planning approach and brand making by imagery. It is able to construct the meaning of an image and its creativeness directly.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.26-35
• /
• 2009

This study is an analysis of the design changes of children's play facilities and the related rules and regulations which causes these changes. Accordingly, it is noticed that a site's change of design by legislation and by yearly alternation influences playground design. First, after revising the provisions for the distance from roads and parking lots, the constructing of safety fences between play facilities and the using of durable materials, alterations of the designs have been made a reality. Second, the design changes after the period of regulation transitions were caused by provisions related to the shelter of evergreens and conditions of the sun. Third, the changes of the playgrounds were related to the substitution of exercise facilities for the local residents and in carrying out a hygiene exam more than twice a year. Because a lack of regulatory standards for the design of playgrounds resulted in compliance based on individual interpretation and because a substitution of exercise facilities is part of the way to alleviate these regulations, the conditions of the site under investigation could be projeced. By such changes of regulations and analysis of alterations of playground design, programs for improvement were suggested. It turned out that the composition of the concrete standard in conformity with regulations required closer observance. Moreover, design standards for children's playgrounds are needed, such as the provision of variation in external appearance, the creation of more flexible layouts and the outlining of spaces by themes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.14-25
• /
• 2009

We live in an age which is exponentially growing as the knowledge paradigm is changing. New sites are subject to contemporary landscape architecture function as "fields" in which this hybrid aspect is both actively practiced and becoming a catalyst for change in the area of landscape architecture. With this as its background, this study attempts to deal with how the aspect of integration in environmental design is manifested. For this purpose, the tendencies for the discussion of integration in various fields of practice were examined: planning theories, urban theories, architecture, public environment, engineering, and landscape architecture. As yet, the discussions of interdisciplinary integration, which occur in practice in these respective fields, mainly tend to be oriented toward the effective implementation of the merits of other related fields. Seen from these examples of practice, integrated design approaches can be found in the following three aspects: design objects, respective professional areas, and methodologies of approaches and design. In terms of design objects, the positions of individual design subjects present themselves as most obvious, and integration or combination of the physical targets that come to exist through design can be easily seen. Most examples of integration turn out to be this, in almost every case of which the theme and the target of expression are integrated via a small number of certain methods. In terms of professional areas, what can be mainly evidenced is how the individual subject acts when the subject designs. The strong points of professionals from each field seem to create synergy, achieving through integration optimum results. In terms of methodologies of approaches and design, there are attempts to create integrated approaches as ways of effective decision-making, in which case the integration of all of the interest parties is of primary concern. As yet, few instances have been found in which integrated design has had enough strength to be seen as a concrete design methodology based on practical examples. However, it is encouraging that theoretical approaches and the necessity for integrated design have been identified from multiple perspectives, and that a practical movement such as landscape urbanism has come into active being. The authors of this study find this point in time to be ripe for discussions on integrated practices in terms of environmental design, on the basis of the synthetic approaches mentioned above.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.113-121
• /
• 2014

Objectives: This study is intended to seek credible and efficient measurements on airborne asbestos concentrations that allow immediate action by establishing complementary data through comparative analysis with existing PCM and KF-100 method real-time monitoring equipment in working areas in Seoul where asbestos-containing buildings are being demolished, including living environment surroundings. Materials: We measured airborne asbestos concentrations using PCM and KF-100 at research institutes, monitoring networks, subway stations and demolition sites of asbestos-containing buildings. Through this measurement data and KF-100 performance testing, we drew a conversion factor and applied it via KF-100. Finally we verified the relationship between PCM and KF-100 with statistical methods. Results: The airborne asbestos concentrations by PCM for the objects of study were less than the detection limit(7 fiber/$mm^2$) in three (20%) out of 15 samples. The highest concentration was 0.009 f/cc. The airborne asbestos concentrations by PCM in laboratories, monitoring networks, subway stations and demolition sites of asbestos-containing buildings were respectively $0.002{\pm}0.000$ f/cc, $0.004{\pm}0.001$ f/cc, $0.009{\pm}0.001$ f/cc, and $0.002{\pm}0.000$ f/cc. As a result of KF-100 performance testson rooftops, the conversion factor was 0.1958. Applying the conversion factor to KF-100 for laboratories, the airborne asbestos concentrations ratio of the two ways was nearly 1:1.5($R^2$=0.8852). Also,the airborne asbestos concentration ratio of the two ways was nearly 1:1($R^2$=0.9071) for monitoring networks, subway stations, and demolition sites of asbestos-containing buildings. As a result of independent sample t-tests, there was no distinction between airborne asbestos concentrations monitored in the two ways. Conclusions: In working areas where asbestos-containing buildings are being demolished, including living environment surroundings, quickly and accurately monitoring airborne asbestos scattered in the air around the working area is highly important. For this, we believea mutual interface of existing PCM and a real-time monitoring equipment method is possible.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.475-483
• /
• 2012

Recently, agricultural lands decrease sharply, which was caused by urbanization, land consolidation, road construction, and innovation city construction, etc. In particular, Goyang, Chenan and Wonju city were had severe land use change. Therefore, we analyzed changes of land use, soil properties, and soil information in order to provide the basic soil information and soil management practice in these cities. The results are summarized as follows. The area of crop cultivated land in Korea (2011) was reduced to 17.3ha compared to ones from the previous year (2009). The paddy field decreased by 24.2 ha but, upland field increased by 7.0 ha. The reasons for the reduction of the paddy field were converting paddy field to upland (20.7 ha) > public facilities (3.2) ${\geq}$ building (3.2) > idle land (1.3) > and others (0.9). Other reasons for reduction in the upland field were switching upland to paddy field, (20.7 ha) > land developed (4.5) > and restoration (0.3) respectively. The main reason of converting paddy field to upland was changing from rice to more profitable upland or greenhouse crops. The cropland area (paddy fields, upland, orchard) of Goyang, Cheonan, and Wonju city were reduced to 1,466 ha, 9,708 ha and 6,980 ha respectively. The ratio of cropland area in each city was reduced by 45~25% dramatically compared to upland soil survey project in Korea (1995~1999). These data were compared with MiFAFF statistics data to use for land use cover map of Ministry of environment. But they were differences significantly. Therefore, intensive investigation should be advised throughout the utilization plan. The paddy fields located in small valley in Wonju city were changed into upland or orchard. The drainage classes of soil have been deteriorated because the flows of water were intercepted by road construction and other disturbance to water flows. In particular, paddy fields have been changed to not only upland, orchard, greenhouse cultivation but also to fallow and soil dressing on paddy in Wonju city. The soil suitability classes of paddy field in Wonju innovation city were the 3rd grade for 70.8% of the area and the 4th grade for 29.2%. The soil suitability classes of upland was the 4th grade for 88.7% of the area. Fortunately, good soil suitability classes were not belong to innovation city in Wonju. So, the good farm land should be conserved and revise the related law.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.580-587
• /
• 2017

Woodfiber insulation board can be considered as a one of the key material for low energy consumption, comfortable and safety construction of residential space because of its eco-friendly and high thermal insulation performance. This study was carried out to investigate the formaldehyde (HCHO) total volatile organic compounds (TVOC) emission properties and combustion shapes by flame test of low density fiberboards (LDFs) prepared with different adhesives. HCHO TVOC emission and combustion properties of LDFs prepared by melamine urea formaldehyde (MUF), phenol formaldehyde (PF), emulsified methylene diphenyl diisocyanate (eMDI) and latex resin adhesives were measured by desiccator method, 20 L chamber method, and flame test, respectively. As results, LDFs manufactured by MUF, eMDI and latex resin adhesives satisfied the Super $E_0$ grade of HCHO emission performance except PF resin. Furthermore, TVOC emission of all LDFs were satisfied the Korean indoor air quality standard (below $400{\mu}g/m^2{\cdot}h$). Especially, LDF with eMDI resin adhesive showed the lowest HCHO and TVOC emissivity, that $0.14mg/{\ell}$, $12{\mu}g/m^2{\cdot}h$, respectively. However, eMDI emitted the small amount ($3{\mu}g/m^2{\cdot}h$) of toluene in VOC components. In the flame test, LDF with MUF resin adhesives showed the most favorable shape after flame test compare to LDFs prepared other adhesives. Based on HCHO and TVOC emission, and combustion shapes, MUF resin adhesive may be recommended to prepare LDF for insulation purpose.