• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.215-215
• /
• 2016

면적감소계수는 강우의 공간적 분포 특성을 반영하고자 지점강우량을 면적강우량으로 환산하는 데 사용된다. 현재 국내에서는 세 가지 방법을 사용하여 소유역의 면적감소계수를 산정하고 있다. 세 가지 면적감소계수 산정 방법은 1) 유역 전체에 같은 면적감소계수를 적용하는 방법, 2) 분할된 소유역 별로 면적감소계수를 산정하여 적용하는 방법, 3) 홍수량 산정지점 별 누가면적에 대한 면적감소계수를 적용하는 방법이다. 이들 방법은 기본적으로 호우의 중심이 항상 유역 내 특정한 지점에 고정된다고 가정하는 방법이다. 본 연구에서는 기존의 방법과 달리, 호우의 형상을 고려한 면적감소계수 적용기법을 새롭게 제안하였다. 아울러 제안된 방법과 기존의 방법들을 충주댐 유역에 대해 적용하고, 이를 비교 평가하였다. 그 결과 제안된 방법이 기존의 방법들에 비해 보다 양호한 결과를 이끌어 낼 수 있음을 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.217-217
• /
• 2016

강우는 시 공간적 변동성이 크고 지형특성으로 인한 지역 편차가 큰 특성을 가지고 있다. 따라서 강우 발생을 분석하는 경우, 강우의 시 공간적 변동성과 지역특성을 고려해야한다. 본 연구에서는 지역특성을 고려한 강우 앙상블을 생성하였다. 강우의 지역특성을 고려하기 위해 2010~2015년 동안 발생한 강우사상 중 서울지역을 통과하는 대류성 강우사상 30개를 선정하였다. 지역특성 고려하기 위한 매개변수로 강우강도와 풍향을 선정하고, 매개변수의 가중인자를 결정하였다. 또한 매개변수의 정량화를 위해 강우강도의 경우 대수정규분포, 풍향의 경우 Von mises분포를 매개변수의 확률분포로 선정하고, 선정된 두 확률분포에 Copula함수를 적용하여 결합확률분포를 추정하였다. 아울러 추정된 결합확률분포에 Monte-Carlo Simulation기법을 적용하여 매개변수에 대한 난수를 발생시키고, 이를 이용하여 지역특성을 고려한 강우 앙상블을 생성하였다.

• Korean Architects
• /
• no.12 s.320
• /
• pp.112-121
• /
• 1995

대전산업대학교에서는 대학의 장기발전계획에 맞추어 기존건물과 조화를 이루며 대학 특성에 맞는 지식정보센터로의 기능을 발휘할 수 있도록 새로운 건축문화의 상징으로 중앙도서관을 건립코자 현상설계경기를 실시, 총 14개 작품이 응모된 가운데 신화(엔)건축(김인수+최재인)안을 당선작으로 선정, 지난 10월 20일 발표했다. 일반공개경기 방법으로 진행된 이번 설계경기의 우수작은 시원건축(박창권)안이, 가작에는 이방건축(김광출), 천일건축(한규봉), 선건축(오선교)안이 각각 선정됐다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.164-165
• /
• 2019

Light-weight foamed concrete using cement as a raw material consumes a lot of energy and generates $CO_2$ because of the high temperature firing process in the manufacturing process of cement. This study was carried out to evaluate the use of blast furnace slag through the properties analysis by substituting a certain amount of blast furnace slag as an industrial by-product as a substitute for cement. The experimental results showed similar characteristics to those of using only cement when the blast furnace slag fine powder was used in an appropriate amount. Therefore, if a certain amount of cement is replaced with blast furnace slag powder, it can maintain similar quality, reduce natural resources and energy consumption, and reduce carbon dioxide emissions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.35-36
• /
• 2022

In order to supplement the flame-retardant performance of oil stain, which can prevent wooden buildings from contamination, (NH4)2HPO4, a phosphorus flame-retardant, was added to oil stain and applied for each type of plywood, and an experiment was conducted. The addition rate was set to 0-60%, but white powder appeared on the surface of plywood from 40% and thus it was impossible to experiment, so the maximum addition rate was selected as 30%. As a result of the experiment, acacia plywood had the best performance. As the rate of addition of the flame retardant increased, the remaining time and carbonization length of all plywood decreased, but the carbonization length of the MDF plywood was not met with the standards.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.55-56
• /
• 2022

As global warming becomes serious, research is continuously being conducted to reduce CO2 emissions. Among building materials, the carbon emission of cement is so high that it accounts for 6.8% of the carbon emission of the entire industry. Studies replacement of cement with blast furnace slag and fly ash are steadily increasing. In addition, efforts are being made to reduce air pollution due to increased damage caused by increased concentrations of harmful substances such as fine dust and heavy metals in the air. There is an increasing number of studies that enable adsorption by mixing adsorbents into building materials. This study reviewed the strength properties to make an adsorbable non-cement finishing material by mixing tourmaline, an adsorbent, based on the non-cement composite, and confirmed that the strength decreases as the replacement ratio increases.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.105-106
• /
• 2022

Now, the world is increasingly anxious about fine dust due to abnormal temperatures caused by global warming and increased yellow dust caused by desertification, and the World Health Organization (WHO) pointed out that more than 99% of the world's population is exposed to fine dust. In this situation, the reduction rate of fine dust and carbon dioxide of the matrix was tested by using expanded graphite, an eco-friendly and porous material, to improve air quality. As a result of the test, since expanded graphite is a material that expands between layers compared to conventional graphite, the reduction rate of fine dust and carbon dioxide decreases as the replacement rate of expanded graphite increases.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.143-144
• /
• 2019

Recently, environmental pollution related to global warming is on the rise. Meanwhile, renewable energy is a representative example of many efforts to develop eco-friendly energy to solve the depletion of natural resources and the depletion of petroleum resources in conjunction with global warming. Among them, photovoltaic power generation is increasing the subsidies for the government to increase the production of photovoltaic electricity of the general public, showing a high growth rate. However, polysilicon, which is a raw material of the photovoltaic panel, generates waste called polysilicon sludge in the manufacturing process. In order to produce 1 ton of polysilicon, about 2 tons of waste polysilicon sludge is generated. In 2012, polysilicon sludge was generated at 78,000 tons, with an average of about 220 tons per day. The sludge generated due to insufficient treatment of polysilicon sludge is currently solidified and is processed by landfilling. Therefore, in this study, polysilicone sludge is used as the concept of admixture, and the physical properties of the matrix according to the polysilicon sludge replacement ratio based on light burned magnesia is determined.

• Korean Architects
• /
• no.3 s.335
• /
• pp.115-122
• /
• 1997

• Korean Architects
• /
• no.1 s.226
• /
• pp.15-31
• /
• 1988