• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.43-49
• /
• 2021

During the Japanese colonial period in Korea, the Choson Governor-General was a kind of state organ. At that time, for a local administrative office to be built, each province('Do') had to go through a certain administrative procedure and be approved by the Choson Government-General. In addition, it was necessary to receive financial support from the Choson Governor-General in the name of "state assistance" because the financial conditions of each province were not sufficient. To obtain this approval and financial support, the administrative procedure was divided into the first half, where each province requested the construction of a local administrative office, and the second half, where the Choson government-general approved it and supported it financially. There are studies on the first half procedure in 1914 and 1927, which were limited to the new construction of county('Goon') offices among several local administrative offices. This study analyzed the first half of the construction of all local administrative offices in the 1930s.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.8-14
• /
• 2019

In Korean traditional wooden architecture, joint performance varies with the material characteristics of timber, the form of joint, the precision of timber-trimming and the like. Case studies prove that the beam-to-column joint type has large influence on the degrees of deformation and spacing. This is not only true of single-story buildings, but also of large-scale multi-story buildings more apparently. Therefore, this study followed the process of examining to joint types, producing their specimens and testing their structural performance. As a consequence of structural test, the dovetail joint specimen showed the best outcomes of the maximum load and rigidity. Synthesizing the structural performances by respective forms of joints, the Doraegeoji dovetail joint specimen showed the higher performance, followed in order by the Doraegeoji mortise joint specimen and the Tongneoko dovetail joint specimen. The structural performance of a building varies with the characteristics by the shouldering forms of penetrating beams and with the joint types within the columns. This should be considered for the new construction or restoration of multi-story buildings, and be continuously researched henceforth.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.12
• /
• pp.173-180
• /
• 2019

Construction work is a labor-intensive industry, which is required systematic production activities using materials, manpower, and equipment. Among them, manpower resources play a very important role in achieving efficiently production in the organization. Construction work is highly dependent on construction craft workers, and the level of proficiency can be directly related to the construction productivity and quality. However, a rapidly aging construction craft workers in Korea, is being replaced by a foreign construction craft workers because of advoidance of new laborers in the construction site. In the future, if the continuous development and management of construction manpower is not made properly, it may be lead to adverse effects such as setbacks in production, delayed completion, faulty construction, industrial disasters, and decreased productivity in construction site. In this study, it was proposed four important factors for work capacity management of construction craft workers. These were ensuring of physical strength through the health management of construction craft workers, securing of proficiency through career management, ensuring of productivity through work capacity and establing of informatization through work capacity management. By introducing a systematic system, it is possible to improve construction craft workers' professionalism, enhancing the level of welfare, reflecting the realities of labor costs, increasing the quantitative and qualitative levels of construction craft workers, Futhermore it was demanded the continued interest and policy support for the realization of effective management of construction craft workers.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.3
• /
• pp.147-157
• /
• 2020

With the increasing obligation to reduce greenhouse gas emissions to the building sector, the government has been gradually expanding its obligation to zero-energy buildings since 2020. Since the ZEB certification took effect in 2017, 48 preliminary and main certifications have been completed as of March 2019, and most of them are public buildings or even certified, but have earned Grade 5 of ZEB. This means that compared with the number of annual building permits registered in Korea, the figure is insignificant, and that it receives little if not mandatory. Therefore, this study investigated empirical cases of ZEB additional construction cost and conducted cost benefit analysis according to changes in ZEB additional construction cost based on a preliminary feasibility analysis project recently conducted by the KDI. In addition, considering the public buildings, the social costs were considered, and the cost-benefit analysis method was the same as the KDI's preliminary feasibility analysis method. The analysis shows that if the ratio of ZEB additional construction cost is more than 5 percent, it is analyzed that there is no economic feasibility, and considering that the ratio of additional construction cost in the cases of ZEB in Korea is 17 percent to 38 percent, it will not be easy to obtain ZEB certification in terms of cost. Finally, to narrow these differences in cost and economic aspects, the overseas low energy and ZEB incentive examples proposed measures such as the concept of subsidy payment in Illinois and the compensation of social costs to private ZEB.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.446-457
• /
• 2012

Recently, BIM(Building Information Modeling),which has been an issue in construction work, has been focused on as a new alternative of building industry for way out of crisis by slowing down and decreasing of orders in construction industry. Research for introducing BIM to the architectural field is already proceeding actively at home and abroad. However, civil engineering is so nonrecurring, horizontal, and different from regular construction works that it a large amount of information occurs because of wide range of project, which causes construction firms and design engineers to have some questions whether their initial investment cost would work or not and feel uncomfortable with the cost. In this study, technology level in engineering firms were surveyed for adapting BIM to domestic civil engineering. Development direction of BIM standard information model was drawn through awareness change analysis of BIM in civil engineering, as well. Deduced development direction is composed of guide development, system development, deliverable check and international standard proposal. The outcome will be employed as preliminary data for the study on development of infrastructure BIM standard and deliverable check system in civil engineering.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.3-14
• /
• 2021

In the Chinese construction industry, the utilization of Building Information Modeling (BIM) aims to increase the total output of the construction industry by solving the problem of inefficient interoperability in the construction industry. In 2011, the Chinese Ministry of Housing and Urban-Rural Development despite the technical advantages of BIM and the government policy, the BIM adoption rate in China is lower than 45%. Meanwhile, as the South Korean construction industry is a step ahead of its Chinese counterpart in introducing and utilizing BIM, it is expected that BIM is more actively utilized and accepted in South Korea than in China. According to a comparative study based on the hype-cycle theory, South Korea is at a more advanced stage of introducing BIM, than in China. This study aimed to suggest how to increase BIM utilization rates in China. To this end, this study comparatively analyzed factors affecting BIM acceptance between China and South Korea. For the comparative analysis of the BIM acceptance factors between China and South Korea, literature reviews on the technology acceptance model (TAM) and BIM acceptance model were carried out, and based on that, the BIM acceptance factors were classified. Other BIM acceptance factors were also added and considered, as they reflected Chinese national characteristics and construction industry. As for the derived BIM acceptance factors, construction project participants, especially actual BIM users in China and South Korea, were targeted for the survey. A t-test using SPSS 22.00 was carried out to identify significant differences in data. Finally, based on the t-test results, this study suggested ways of improving the BIM utilization rate in China. Based on the findings, this study is expected to contribute to activating BIM adoption in the Chinese construction industry and also to set a theoretical foundation for future studies on BIM utilization in the industry.

• The Safety technology
• /
• no.166
• /
• pp.12-14
• /
• 2011

불과 2년 전 한적한 시골 농경지였던 충청남도 서천군 마서면 일대. 푸른 들판과 초록의 나무만 가득했던 이곳이 환경보존의 중요성을 알리는 '생태원'으로 변하고 있다. 무려 99만8,000$m^2$의 사업부지에 생태연구센터, 생태교육센터, 생태체험관, 야외생태체험공간 등이 내년 말 완공을 목표로 한창 조성되고 있는 것. 각 시설 모두가 세간의 큰 관심을 받고 있지만 그중에서도 삼성물산 건설부문이 시공 중에 있는 '국립 생태체험관'은 아직 완공 전임에도 국내를 넘어 세계적으로 유명세를 떨치고 있다. 열대관, 아열대관, 지중해관, 온대관 극지관 등 지구의 5대 생태계를 재현하는 '국립 생태체험관'은 전 세계 각지의 유명 생태관들의 모든 장점에다 국내만의 독창성을 더해 현존 최고 생태체험관의 탄생을 예고하고 있다. 때문에 시공사의 자긍심이 남다른 것은 당연한 일. 최신 친환경 공법을 바탕으로 건물의 가치를 높이는데 혼연의 힘을 다하고 있다. 특히 시공 과정에서 가장 많은 신경을 쓰는 것이 바로 '안전'이다. 후세에 환경보전과 보호의 필요성을 전하는 의미 깊은 장소이니 만큼 안전사고로 그 취지를 얼룩지게 할 수 없다는 것이 이곳 임직원의 각오. 안전으로 역사에 기록될 건축물을 만들고 있는 삼성물산 건설부문의 '국립 생태체험관' 신축현장을 찾아가 봤다.

• Journal of KIBIM
• /
• v.10 no.2
• /
• pp.12-20
• /
• 2020

Recently, interest in BIM technology has been growing in the domestic construction market as the number of construction projects requiring the application of BIM technology has increased. The use of BIM allows the use of various visualization functions through 3D models as well as drawing interference review, quantity calculation and integrated management of information. In particular, estimates of construction costs based on BIM can increase work efficiency by reducing the burden of calculating construction costs and managing them. In order to increase the efficiency of BIM-based cost estimates, it is necessary to improve the correlation between the BoQ(Bill of Quantity) information and the BIM model. For this purpose, the ratio of the amount and item to the detailed construction of the current BoQ was analyzed, especially the problem of the calculation of construction cost in the window work in this study. In addition, we would like to suggest a method for systematically linking the BoQ information with the BIM model by improving the BoQ information structure of the window work. It is expected that this will increase the efficiency of the quantity calculation and analysis work of construction cost of window work. In addition, it is expected that this method will help to analyze and predict changes in construction cost of windows and doors by facility characteristics and type.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.8
• /
• pp.3-11
• /
• 2018

In this study, total nine R/C beams, designed by the PVA Fiber with ground granulated blast furnace slag and recycled fine aggregate were constructed and tested under monotonic loading. In the material development, micromechanics was adopted to properly select the optimized range of the composite based on steady-state cracking theory and experimental studies on the matrix and interracial properties. Experimental programs were carried out to improve and evaluate the structural performance of the test specimens: the load-displacement, the failure mode, the maximum strength, and ductility capacity were assessed. Test results showed that test specimens (BSPR-20, 40) was increased the maximum load carrying capacity by 3~6% and the ductility capacity by 9~14% in comparison with the standard specimen (BSS). And the specimens (BSPR-60, 80, 100) was decreased the maximum load carrying capacity by 0~4% and the ductility capacity by 79% in comparison with the standard specimen (BSS) respectively.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.110-133
• /
• 2009

This study is on the types and characteristics of foundation and basestone which can be seen in remains of Baekje and Silla in beginning study of them in ancient Korean architecture. This is a close investigation that division of the shape of the basestone and the type of Jeoksim(積心, the supporting part under the basestone) and foundation under the ground. Also it can be seen that the difference of construction technique and the relation with each part. The research objects are the remains of temples which had been excavated or are been excavating now in Baekje area and in Silla from 6th to 8th century. Results of research published in north Korea are quoted for the remains in Goguryeo being unable to be seen as they are in north Korea. If it had been possible to visit the sites, the materials would have been collected from the direct investigation. Otherwise they are collected from the excavaion results published. After that the basestone and the foundation could be divided according to several types. Also each types can be compared and studied according to times and building use. The results are follows. There are some different characteristics between Baekje and Silla in the technique of foundation, jeoksim, and basestone. Through them it is possible that the arhitectural technique of Baekje had been introduced to not only wooden pagoda in the erection of hwangryongsa temple. These results are considered limited in a few remains grasped the characteristics so it should be complemented continuously as the outcome of excavation of architectural remains will be accumulated to.