• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.26-30
• /
• 2005

A 10-week feeding trial was conducted to determine the optimum feeding rate of two extruded pellets (EP1 and EP2) and raw fish-based moist pellet (MP) for juvenile flounder. Two replicate groups of the fish (average weight of 27 g) were fed EP and MP three times daily at different feeding rate (satiation and $85\%$ satiation). Weight gain of fish was not affected by diet, but affected by feeding rate. Weight gain with satiation feeding group showed :t tendency to higher compared to that of fish with $85\%$ satiation feeding at the same diet. Feed efficiency of fish was affected by diet, but not feeding rate. Feed efficiency of fish fed the EP1 and EP2 was higher than that of fish fed the MP at the same feeding rate. Daily feed intake was affected by diet and feeding rate. Daily feed intake of fish fed with satiation was higher than that of fish with $85\%$ satiation at same diet, and this variable of fish fed the MP was higher than that of fish fed the EP 1 and EP2. Protein efficiency ratio of fish fed the MP was significantly lower than that of fish fed the EP1 and EP2 regardless of feeding rate. Lipid content of whole body was affected by diet, and that of fish fed the EP2 and MP at satiation feeding was the highest. It can be concluded that satiation feeding will be good and EP is better than MP for growth of juvenile flounder grown from 27 g to 51 g.

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.521-530
• /
• 1993

According to the Montreal Protocol, CFC 113, one of the ozone-depleting substances, will be prohibited to use as a cleaning solvent essentially in the electronic industry. Therefore, the development of the alternative cleaning solvents to CFC 113 is being accelerated. A number of the alternative cleaning solvents are avialable on the market. The alternatives of Axarel 32(DuPont), Cleanthru 750H(KAO Chemical), and EC-Ultra(Petroferm) are chosen for the comparison of cleaning performance with CFC 113. The test methods for measuring the cleaning performance were composed of the measurement of the physical properties, the experiments on the material compatibility with cleaning solvents, the measurement of the evaporation rate, and finally the experiments of the removal efficiency. Normally the basic physical properties of the alternatives had higher boiling points, viscosity and surface tension, which were quite different to those of CFC 113. In terms of solubility of rosin-based flux, the solubilities of abietic acid (nonpolar organic) were similar, but those of the activator (polar organic) in the alternatives were better than CFC 113. The evaporation of the alternatives was very slow, compared to CFC 113, which had much lower boiling point. All the cleaning solvents showed the good material compatibility with FR4 and Cu-coated PCB. The better removal efficiencies of abietic acid were obtained when using the ultrasonic mechanical energy over the dipping method. The experiments also indicated the very slow-eavaporating solvent was not desirable with the dipping cleaning method, and the differences in the removal efficiency of the alternatives with the ultrasonic cleaning method were negligible. Among the alternatives, the overall cleaning performances were obsorved as almost similar. Before selecting the ultimate cleaning solvent, the application of cleaning machine, environmental issues, and economics are simultaneously considered with the cleaning performance.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.335-346
• /
• 2015

The objective of this study was to evaluate the effect of dietary rosemary on performance, microflora population in cecum and noxious gas emission from litter of broiler. A total of 216 broiler chicks at 7 days old were fed the commercial diet (control), added 0.5% level of dried rosemary leaves (5 g/kg diet, T1) and 1.0% level of dried rosemary leaves (10 g/kg diet, T2) for 4 weeks. The body weight gain and feed conversion ratio were improved by feeding rosemary at 7 to 35 days of age (P<0.05), but there was no difference between T1 and T2. Amount of feed intake and mortality were not different among the three group. There was an increase in the microflora population of Lactobacillus (P<0.05) and decreased in E. coli and salmonella (P<0.05) in the cecum contents at 21 and 35 days of age. Emission of ammonia gas from litter was significantly decreased by supplementary rosemary at 21 to 35 days of age (P<0.05), but there was no difference between T1 and T2. These results indicated that feeding 0.5 to 1.0% level of dried rosemary leaves during broiler production improved in the body weight gain and feed conversion ratio because of increasing nutrient digestibility from feed, also increase in intestinal beneficial bacteria and decrease in harmful bacteria in the cecum contents, and decreasing emission of ammonia gas from litter.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.164-168
• /
• 2005

An experimental design has been used to optimize the analysis of volatile component from fresh ginseng using solvent free solid injector (SFSI). The analysis were performed at three different sample preparing methods (fresh, oven drying and freezed drying), different injector port temperatures (100, 150, 200, 250 and $300^{\circ}C$) and different preheating time (3, 5, 7, 10 and 15 min) according to the above experimental design. The optimum conditions from analytical results were fresh sample (sample preparing methods), $250^{\circ}C$ (injector temperature) and 10 min (preheating time). Ginsengs grown for six years at Gumsan were prepared for fresh, white and red ginsengs. These fresh, white and red singsengs were analyzed for their volatile components by GC/MS equipped with SFSI according to the above the optimum conditions. A total of thirty-three volatile components were identified in fresh ginseng by SFSI, thirty-six in white ginseng and thirty-eight in red ginseng. These results suggested that the SFSI method could be used for isolating volatile component in ginsengs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.403-409
• /
• 2018

Inconel 713C which of a commercial Ni super alloy have the composition of 70 % Ni, 12 % Cr, 6 % Al and 4 % Mo. Mo is very expensive and have some economic value to recover in the alloy. In this study, liquid-liquid exraction(solvent extraction and stripping) has been performed to separate Mo from the synthetic leaching solution of spent Inconel 713C alloy and prepare to Mo powder by dying, evaporation and heat treatment. The experiments were conducted by using synthetic leaching solution which was prepared $NaMoO_4$ $2H_2O$ by dissolved in distilled water. Alamine336 and Cyanex272 dissolved in kerosene were used as extractants. The extraction percentage of Mo by Alamine336 is 99 % in the condition of the range of pH 1 to 4 and 1 % of concentration of Alamine336. The stripping solutions are used by HCl, $H_2SO_4$ and $HNO_3$ solutions and the concentrations were controlled by distilled water. The concentrations of HCl, $H_2SO_4$ and $HNO_3$ as stripping solutions are increased, the stripping percentages of Mo are increased and the stripping percentage of Mo by $HNO_3$ is higher than other stripping solutions. After liquid-liquid extraction and heat treatment, $MoO_3$ powder which of the purity of 97.5 % was prepared.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.67-74
• /
• 2016

This study was purposed to evaluate the characteristic changes of the solidified livestock manure fuel(SLMF) through the application of compression treatment process. The compression process led to an increase of VS/TS ratio (Volatile solids/Total solids ratio) and moisture removal effect of SLMF. The amount of leachate withdrawn from dairy cattle manure and Hanwoo manure by compression were 21~26%(w/w) and 15~20%(w/w), respectively. The specific gravity of the leachate of dairy cattle manure and Hanwoo manure were 1.01 and 0.99, respectively. The dehydrated cow manure was easily processed into ball-shaped solidified fuel. The drying time of the SLMF was proportional to the diameter of the solidified fuel. The highest heating value was observed in diameter range of 10~15mm SLMF. It is concluded that the higher heating value of 10~15mm SLMF was related with the amount of fibrous matter contained in the SLMF.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.518-524
• /
• 2013

This study investigated the degradation of taste-and-odor compounds and toxins using dielectric barrier discharge plasma. The degradation of taste-and-odor compounds was conducted on geosmin and 2-methyl isoborneol (2-MIB), and the toxins investigated were microcystin-LR (MC-LR), microcystin-RR (MC-RR), microcystin-YR (MC-YR) and anatoxin-a. Largely depending on the type of gas fed to the plasma reactor, the degradation efficiencies of the taste-and-odor compounds decreased in order of oxygen (100%) > dry air (96%) > nitrogen (5%) for geosmin and in order of oxygen (100%) > dry air (94%) > nitrogen (2%) for 2-MIB on the basis of 150 s reaction time. This result suggests that the oxidative reactive species generated during plasma treatment, especially long-lived ozone, are mainly responsible for the degradation of these compounds. When using oxygen as the feed gas, geosmin and 2-MIB were totally degraded within 150 s, microcystins within 10 s, and anatoxin-a within 30 s. It was found that the taste-and-odor compounds and toxins were degraded more rapidly in real lake water than in distilled water.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.6
• /
• pp.13-20
• /
• 2005

This study was conducted to examine the growth and physiological characteristics of Polystichum lepidocaulon native fern as affected by soil mixture as an environment modeled on habitate where was sunken-condition. 1. Polystichum lepidocaulon grew well sunken more than non-sunken condition. Under soil mixture of field soil : sand : leaf mold, Plant height, frond width, frond length, stipe length and ornamental value were increased compared with the other soil mixture. 2. Fresh and dry weight of fronds were higher with non-sunken than sunken condition. In sunken condition, fresh and dry weight were better with field soil : sand : leaf mold than the other soil mixture. 3. Number of spore fronds were increased with sunken condition. As sunken condition, sand : leaf mold was better than field soil : sand : leaf mold or leaf mold. 4. Photosynthetic rate, $CO_2$ absorption rate and water efficiency were higher with field soil : sand : leaf mold than that of sand : leaf mold or leaf mold. expect of stomatal conduction and $CO_2$ use efficiency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.459-462
• /
• 2017

This paper, A large hair dryer was developed to shorten the drying time of the user's hair. The mechanism that determines the strength and stability of large hair dryer products is 'motor'. In a typical hair dryer to determine the wind speed using a 5V or 12V DC motor, Outer air vents are also great ways to use a long time, power consumption by a single blow. But, In the case of large hair dryers using multiple blows, the aim is to reduce the power consumption by increasing the intensity of the wind speed in a short time. Looking at the simulation results of a typical hair dryer, It was found that women spent an average of 20 minutes and that large hair dryers took an average of 5 minutes. This paper, In order to shorten the average drying time, it is necessary to determine the efficiency of the motor, the blow position of the outer frame, and the power consumption and studied for product development. As a result of the research and simulation, the power consumption is 0.8 times, the wind speed is 1.5 times, and the drying time is about 5 minutes. Therefore, it was found that the large hair dryer developed in this study can maximize the user 's average drying time and the efficiency of the motor.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1665-1671
• /
• 2012

This study was conducted to assess the removal of residual pesticides and to obtain high amounts of quercetin in onion peel extracts (OPEs) by 4 washing treatments. Washing is one of the standard processing steps in obtaining functional food ingredients from onion peel. After a first detergent wash (0.2% w/v) (DW) and hot air drying ($80^{\circ}C$, 24 hr) (B), 4 washing treatments were tested, including a second DW (C), ultrasonication ($50^{\circ}C$, 10 min) plus DW (D), 0.3% $H_2O_2$ (v/v) plus DW (E), and blanching ($95-97^{\circ}C$, 2 min) plus DW (F). This was followed by 60% (v/v) ethanol extraction and vacuum freeze drying of the OPE. The E treatment yielded 89.04% OPE and a quercetin content of 96.84% in the OPE compared with the B treatment, and had the highest efficiency of all treatments tested. The OPE was tested for the presence of 177 residual pesticides and three compounds were detected in all treatments: cyhalothirn, fluquinconazole and procymidone. Cyhalothirn and fluquinconazole levels were below the permitted levels for fresh onion, while procymidone was present in the high level range of 128.01~133.46 mg/kg in all samples. The E treatment was a better washing method than the others for removal of residual pesticides. It could reduce the level of residual pesticides without changing the functional properties of the OPE.