• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.98-104
• /
• 1987

Studies were carried out to determined the optimal conditions of processing and changes in trypsin indigestible substrate(TIS) and in vitro protein digestibility of paddy grasshopper(Oxya chinensis formosana) under various drying conditions. The multienzyme assy and amino acid compositions were used to predict the quality changes of dried products. The in vitro protein digestidility of defatted products were higher than that of sun and hot air dried products. This results indicated that heat processing is decreased the digestibility, but is increased the TIS contents of dried samples. Amino acid composition of the products was comparable to the ANRC casein scoring pattern. The protein was espeoially low in the amount of lysine, tryptophan and methionine, but high in the quantity of aspartic acid, glutamic acid and arginine indicating that it could be a difference of the dry processing. C-PER and DC-PER were 2.65 and 2.44, respectively, in the defatted and freeze dried products and 2.49 and 2.30, respectively, in hot air dried products. From the these results, it could be confirmed that defatted and freeze dried products might be utilized with feed or foodstuff, unless the toxic substances were no longer detectable.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.381-385
• /
• 2003

An efficient method of plant regeneration from Acanthopanax chiisanensis somatic embryos was developed. Cotyledonary somatic embryos were obtained in liquid Murashige and Skoog (MS) medium from embryogenic cell suspension cultures. They were desiccated for 0 to 72 hr and then cultured on MS medium containing NAA, BA, GA$_3$, (0-0.5mg/L). The highest multiple shoots formation (100％) was obtained from 72 hr desiccated somatic embryos on ifs medium with 0.5mg/L NAA＋0.5mg/L BA or 0.5 mg/L NAA＋0.5mg/L BA＋0.5mg/L GA$_3$ after 6 weeks culture. Plant conversion from multiple shoots was not high. The highest plant conversion from multiple shoots was obtained on 1/3MS medium with 1.0mg/L GA$_3$. Converted plantlets were transferred to ex vitro condition and the highest survival rate (70％) of the plantlets was obtained on plastic pots containing vermiculite and sand. These results indicate that micropropagation procedure can be applied for an efficient mass propagation of Acanthopanax chiisanensis.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.165-178
• /
• 2011

A gigantic ship is constructed by assembling various types of ship blocks, each block being made by cutting and piecing the steel-plates together. The steel-plate piling process as the initial stage of ship construction sorts and manages the steel-plates according to the ship blocks that the steel-plates are used to make. The steel-plate piling process poses some problems such as process delay due to piling errors, safety vulnerability due to the handling of extra heavy-weight objects, and the uncertainty of work plan due to lack of information management in the pile spaces. We constructed a steel-plate piling process system based on the context-aware computing to resolve such problems. We built simulation system that can simulate the piling process and then established a smart space within the system by using tags, sensors and a real-time location system in order to collect context information. Workers receive an appropriate or intelligent service from the system.

• Food Science and Preservation
• /
• v.12 no.1
• /
• pp.62-67
• /
• 2005

Microwave-assisted extraction (50 W, 2,450 MHz, MAE) with properties of selective heating and subsequent extraction for certain phytochemicals from natural materials was applied to pre-establish the extraction conditions for total yield total phenolics, and electron donating ability (EDA) from Brossica oleacea. The experiments with $50\%$ EtOH solvent showed that 20 mesh in particle size of cabbage flake $(moisture\;4.5\%)$ and 1:10 (g/mL) in the sample to solvent ratio for both raw $(moisture\;90.2\%)$ and flake cabbages were optimal for MAE efficiency. Under these conditions, total yield increased with extraction tim, which was highest for raw cabbage extract in $50\%\;EtOH$ solvent followed by $100\%\;EtOH$ and water. While that of flake cabbage extracts was highest in $50\%\;EtOH$ followed by water and $100\%\;EtOH$. The contents of total phenolics and EDA in extracts gradually increased after 3 min of MAE, which were highest when using $100\%\;EtOH$ solvent followed by $50\%\;EtOH$ and water in raw cabbage and $50\%\;EtOH$ followed by water and $100\%\;EtOH$ in flake cabbage, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.3
• /
• pp.230-235
• /
• 1983

Physicochemical properties of instant rice prepared by hot-air drying, alcohol dehydration and freeze-hot air drying were studied. Freeze-hot air drying rice showed the fastest rehydration rate as well as the most desirable textural characteristics. Sensory evaluation suggested that the freeze-hot air drying rice also had more desirable taste, flavor and texture. However, color was more desirable in alcohol dehydrated rice.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.306-310
• /
• 2005

The comparison in release rate constant and properties of extracts from extruded raw ginseng and extruded white ginseng was conducted to apply extrusion process for manufacturing of released ginseng tea bag. Dry raw ginseng and white ginseng powder were extruded at 20∼30% moisture content and 200∼300 rpm by using an experimental twin-screw extruder. Browness and redness (both indicated the releasing of saponin and ginsenosides) were increased with the increase in the screw speed and the decrease of moisture content. Crude saponin and water solubility index (WSI) of both ginseng also share the same behaviour against the level of screw speed and moisture content, as well as browness and redness. The particle size effects of extruded raw ginseng at 20% and 28% moisture content on absorbance of released extract at 260 up to 560 nm, WSI, and water absorption index were determined. While particle size decreased from 800∼1000 nm to 200∼500 nm, absorbance and WSI are decreased. Absorbance and WSI shown increasing level while moisture content was decreased. In conclusion, the formation of pores by expansion and disruption of cell wall in extrusion cooking were obviously responsible to increase the amount of released extract of extruded ginseng and its WSI as well. The extrusion process turns out be the efficient process for manufacturing of commercial ginseng tea product than those of other thermal processes.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.153-169
• /
• 2002

국내 대리석류 석재자원은 지질시대 및 지구조별로 선캠브리아기의 경기육괴와 영남육괴, 시대미상의 옥천대 남서부, 캠브리아-오오도비스기의 옥천대 북동부, 그리고 일부 기타시대의 옥천대 북동부 등으로 분류될 수 있다. 전자는 변성퇴적암류내에 협재된 결정질 석회암, 화강암질 편마암내 포획된 결정질 석회암 등s으로 경기육괴의 포천, 김포, 온수리, 목계와 신림도폭 그리고 영남육괴의 춘양, 현동, 울진, 중평동, 장기리와 장계도폭 등이 해당된다. 시대미상암류는 옥천대 남서부로서 목계, 충주, 괴산, 강경, 남원과 송정도폭, 그리고 캠브리아기는 풍촌석회암으로 임계, 호명, 서벽리도폭 등기 해당된다. 오오도비스기는 정선석회암이 분포하는 석병산, 평창, 정선과 임계도폭, 화천리층이 분포하는 문경도폭, 그리고 황강리도폭 등디 해당한다 기타시대는 시대미상의 각력질 석회암과 상부석탄기의 홍점층군내 협재하는 결정질 석회암으로, 이들은 각각 정선도폭과 석병산도폭에 위치한다. 선캠브리아기, 시대미상, 캠브리아기 및 오오도비스기 대리석류의 물성 중에서 흡수율과 공극율은 선캠브리아기, 오오도비스기, 시대미상과 캠브리아기의 순으로 점차 감소한다. 이들의 공극율은 비중에 대하여 대체로 불규칙하며, 흡수율은 공극율에 대하여 거의가 뚜렷한 정의 상관관계를 이룬다. 압축강도는 공극율에 대하여 다소 불규칙한, 그리고 인장강도에 대하여 정의 상관관계를 이룬다. 그리고 마모경도는 압축강도와 인장강도에 대하여 대체로 뚜렷한 정의 경향을 각각 보인다. 이들 대리석류는 선캠브리아기 중경암-경암, 시대미상 중경암-경암, 캠브리아기 거의가 중경암-경암, 그리고 오오도비스기는 경암에 각각 해당한다.하고 구현 단계의 문제점들과 해결책을 기술한다. 다 솔레노이드방식 감압건조장치로 건조한 표고버섯으로 품위에 대한 유의성 검증결과, 표고버섯의 경우 온도별로는 색택과 복원률, 건조실 내부 압력별로는 수축률, 복원률에서 유의차가 있는 것으로 나타났다. 라. 본 연구에서 구명된 감압건조특성을 기초로 하여 배치식 감압건조기를 설계 제작에 활용하고자 한다.ational banks. Several financial interchange standards which are involved in B2B business of e-procurement, e-placement, e-payment are also investigated.. monocytogenes, E. coli 및 S. enteritidis에 대한 키토산의 최소저해농도는 각각 0.1461 mg/mL, 0.2419 mg/mL, 0.0980 mg/mL 및 0.0490 mg/mL로 측정되었다. 또한 2%(v/v) 초산 자체의 최소저해농도를 측정한 결과, B. cereus, L. mosocytogenes, E. eoli에 대해서는 control과 비교시 유의적인 항균효과는 나타나지 않았다. 반면에 S. enteritidis의 경우는 배양시간 4시간까지는 항균활성을 나타내었지만, 8시간 이후부터는 S. enteritidis의 성장이 control 보다 높아져 배양시간 20시간에서는 control 보다 약 2배 이상 균주의 성장을 촉진시켰다.차에 따른 개별화 학습을 가능하게 할 뿐만 아니라 능동적인 참여를 유도하여 학습효율을 높일 수 있을 것으로 기대된다.향은 패션마케팅의 정의와 적용범위를 축소시킬 수 있는 위험을 내재한

• Korean Journal of Weed Science
• /
• v.13 no.1
• /
• pp.7-13
• /
• 1993

Experiments were carried out to investigate the utilization of paraquat and diquat as desiccants for harvest-aid of sesame. When paraquat and diquat were sprayed at 3days or 3hours before cutting of sesame plants, moisture content in treated plots was evenly rapidly decreased and sesame yeild was not significantly different as compared with that in untreated plot. Percentage of germination of sesame seed in treated plots was similar to that in untreated check. Residual amount in sesame seed was not detectable when these chemicals were treated with 250ppm at 3days before cutting of sesame plant. Percentage of thrashing was high in sesame plants treated with paraquat and diauat with the lapse of time after cutting. Required labor in thrashing of sesame was reduced when applied with these chemicals. Harvest efficiency of sesame after spray of paraquat and diquat was good by comparison with the traditional practice.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.197-197
• /
• 2019

총인처리시설에서는 응집제를 주입하여 인이나 오염물질을 침전시켜 처리하고 있으며 PAC(poly aluminum chloride)나 $FeCl_3$, $Al_2(SO_4)_3$, 등 다양한 종류의 응집제가 사용되어지고 있다. 하지만 기존에 사용되어 지고 있는 알루미늄계열의 응집제는 처리수에 잔류이온이 존재하게 되어 인체에 축적돼 알츠하이머 병 등 신체질환을 유발할 수 있는 단점이 있다. 따라서 이러한 단점을 사전에 예방하기 위해 $TiCl_4$와 같은 티타늄계열 응집제에 대한 연구가 진행되고 있다. $TiCl_4$ 응집제는 인 제거에 효과적으로 적용할 수 있으며 수중에 잔류이온을 유발하지 않으며 Ti이온은 치과임플란트나 의료장비로 사용될 만큼 인체에 무해하다고 알려져 있다. 응집제 사용에 따라 생성된 응집슬러지의 처리방안에 있어서 기존 응집제의 경우 생성된 슬러지의 대부분은 하수슬러지 위탁처리업체를 통해 소각 및 매립, 재활용 되고 있으나, $TiCl_4$를 응집제로 사용할 경우 생성된 슬러지를 인발하여 건조 및 소성을 통해 이산화티타늄으로 재활용할 수 있어 슬러지를 친환경적으로 처리가 가능해 기존 슬러지 처리방안의 경제적, 환경적 부담을 줄일 수 있는 장점이 있다. 따라서 본 연구에서는 $TiCl_4$를 하수처리장 방류수에 주입하여 수중의 총인(T-P)을 처리한 후 생성된 슬러지를 인발하여 건조와 소성과정을 거쳐 이산화티타늄을 제조하였다. 방류수를 취수해 2.5mg/L의 초기 총인 농도를 가진 원수를 제조하였으며 제조된 원수에 $TiCl_4$를 0.6mL 주입하였을 때 99.93%의 총인제거효율을 얻을 수 있었다. 응집 실험 후 생성된 슬러지를 인발하여 건조 후 $300{\sim}1000^{\circ}C$의 각각 다른 온도조건에서 소성하여 이산화티타늄을 제조하였으며, SEM과 XRD를 통해 제조된 이산화티타늄의 표면특성과 결정성 분석을 실시하였다. 제조된 이산화티타늄은 $500{\sim}800^{\circ}C$에서는 아나타제, $900{\sim}1000^{\circ}C$에서는 루타일 결정구조가 나타났다. 또한, $TiCl_4$ 주입량에 따른 이산화티타늄의 최종 생산량과 제조 시 사용되는 건조로 및 소성로의 경제적 비용 등을 고려하여 이산화티타늄 1Ton을 제조하기 위해 필요한 단가를 산출하였다. 본 연구에서 제조된 이산화티타늄 1kg의 생산단가는 약 5,400원으로 나타났으며, 가장 많이 사용되는 P-25 광촉매 보다 저렴한 가격으로 제조 및 판매를 기대할 수 있다. 따라서 하수처리장에 적용 시 기존 응집제 보다 비싼 $TiCl_4$ 비용을 보완하고 친환경적인 슬러지 처리로 제조된 이산화티타늄의 유통 및 현장적용을 통해 경제적, 환경적으로 우수하다고 판단된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.110-121
• /
• 2021

The importance of tidal flats lost due to industrialization has recently received attention, and attention is being paid to the creation of artificial tidal flats and maintenance of natural tidal flats. However, there is still a lack of understanding about the behavioral characteristics of mud, mud, and sand that form tidal flats. Although research on the movement characteristics of mixed soils such as tidal flats has been conducted through field investigations and hydraulic experiments, interest in developing a numerical model based on these results has not yet reached. In this paper, the purpose of this paper is to establish a mixed soil model that can efficiently manage the low quality of the tidal flats. In constructing a model for reproducing the surface movement of mixed soil, the numerical stability of the reproduction and movement of sand and mud constituting the mixed soil in the numerical model should be considered first, so first, the volume of sand and mud constituting the mixed soil A mixed soil model representing the relationship was proposed based on a topographical diagram representing the geometric structure of the mixed soil. In order to consider the dry bulk density of the mixed soil, it was possible to consider the dry bulk density of the mud by introducing the water content of the mud containing water. In addition, it was confirmed that the mud and sand movement calculation according to the slope collapse of the mixed soil was stably performed through the calculation of the slope collapse of the mixed soil through the numerical analysis model to which the proposed mixed soil model was applied.