• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.31-31
• /
• 2008

복합 싸이클 시험 모니터링을 통해 NaCl, $CaCl_2$ 제설염 환경에서 11 % Cr, 17 % Cr 페라이트 스테인리스강의 외면부식특성을 조사하고자 하였다. 용액 내 NaCl 및 $CaCl_2$의 농도가 증가함에 따라 용액의 pH가 떨어졌으며, $CaCl_2$의 농도증가에 따른 산성화도가 NaCl에 비해 크게 나타났다. 염수분무-건조-습윤 과정의 반복으로 구성되어 있는 복합싸이클 시험 중 소재의 표면상태 변화를 모니터링 한 결과, 건조 과정 중에 공식이 시작되며, NaCl 환경의 경우엔 습윤과정 중에 $CaCl_2$ 환경의 경우엔 건조 중에 공식성장이 주로 이루어지는 것으로 확인되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2369-2379
• /
• 2013

The Soil-Water Characteristics Curve (SWCC) is affected by the initial density of soil under unsaturated condition. Also, the characteristic of hydraulic conductivity is changed by the initial density of soil. To study the effect of initial density of unsaturated soil, SWCC and the Hydraulic Conductivity Function (HCF) of Jumoonjin sand with various relative densities, 40%, 60% and 75% were measured in both drying and wetting processes. As the results of SWCC estimated by van Genuchten (1980) model, the parameter related to Air Entry Value(AEV), ${\alpha}$ in the wetting process is larger than that in drying process, but the parameters related to the SWCC slope, n and the residual water content, m are larger than those in wetting process. The AEV is increased or Water Entry Value (WEV) is decreased with increasing the relative density of sand. The AEV is larger than the WEV at the same relative density of sand. As the results of HCF estimated by van Genuchten (1980) model which is one of the parameter estimation methods, the unsaturated hydraulic conductivity maintained at a saturated one in the low level of matric suctions and then suddenly decreased just before the AEV or the WEV. The saturated hydraulic conductivity in drying process is larger than that in wetting process. The saturated hydraulic conductivity is decreased with increasing the relative density of sand in both drying and wetting processes. Also, the hysteresis in unsaturated HCFs between drying and wetting process was occurred like the hysteresis in SWCCs. According to the test results, the AEV on SWCC is decreased and the saturated hydraulic conductivity is increased with increasing the initial density. It means that SWCC and HCF are affected by the initial density in the unsaturated soil.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.145-155
• /
• 2012

The matric suction and volumetric water content of Jumunin standard sand with a relative density of 60% were measured using an Automated Soil-Water Characteristic Curve (SWCC) apparatus during both drying and wetting processes. The test time for the drying process was longer than that for the wetting process, because the flow of water is likely to be protected by air trapped in voids within the soils during the drying process. Based on the matric suction and volumetric water content, the SWCC was estimated using the model proposed by van Genuchten (1980). For the drying process, the unsaturated fitting parameters ${\alpha}$, n, and m were 0.399, 8.586, and 0.884, respectively; for the wetting process, the values were 0.548, 5.625, and 8.220, respectively. The hysteresis phenomenon occurred in the SWCCs, which means the SWCC of the drying process is not matched with the SWCC of the wetting process. Using these unsaturated parameters, we estimated the Suction Stress Characteristic Curve (SSCC), based on the relationship between suction stress and the effective degree of saturation. The suction stress showed a rapid decrease when the matric suction exceeds the Air Entry Value (AEV). Therefore, the effective stress of unsaturated soils is different from that of saturated soils when the matric suction exceeds the AEV. The suction stress of the drying process exceeds that of the wetting process for a given effective degree of saturation. The hysteresis phenomenon was also recognized in SSCCs. The hysteresis phenomenon of SSCCs arises from that of SWCCs, which is induced by the ink bottle effect and the contact angle effect. In the case of a sandy slope, the suction stress is positive and acts to enhance the slope stability as the water infiltrates the ground, but is negative when the suction stress exceeds the AEV. The results obtained for the wetting process should be applied in analyses of slope stability, because the process of water infiltration into ground is similar to the wetting process.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.71-76
• /
• 2012

Since sediment in a stable state is disturbed during the process from sediment in a natural state to dredged soil, the turbidity of water is not good. When the dredged soil settles again, the volume change in the sediment occurs. Coagulant and flocculant are added for turbidity mitigation of the water and faster settling process of suspended solid, and the amount of the substances affects the characteristics of the dredged soil. This study is to investigate the characteristics of the dredged soil depending on the amount of three chemical products added to the wet dredged soil and the dry dredged soil through measuring the suspended solids (SS), volume change and sedimentation velocity. The experimental measurements show that the SS decreased, the volume change rate increased, and the sedimentation velocity increased, as the chemical amount increased. In addition, it was found that the dry dredged soil reacted even with little quantity of the chemicals because derelict and microorganism are removed due to the drying process at $100{\pm}5^{\circ}C$.

• Research in Plant Disease
• /
• v.24 no.2
• /
• pp.132-137
• /
• 2018

Melanose caused by Diaporthe citri is a serious disease on yuzu fruits. Moisture is the most important to infect after the pycnidiospores are released. In order to understand how dryness and moisture interruption affect on germination, the conidial suspensions on slide glass were dried for 0-48 h. For the moisture interruption experiment, moisture was supplied for 10 h then interrupted for 0-6 h depending on the treatments. Germinations on the treatments with longer than 15 h of dryness were less than 10%. And those with longer than 3 h of moisture interruption were less than 30%. Compared with other fungal phytopathogens, D. citri was xero-sensitive. Germination on yuzu feel medium was measured under 15, 20, 25, 30, $35^{\circ}C$ with 3, 6, 9, 12, 15, 18, and 24 h of wetness. The minimum wetness periods achieving 10% and 50% germinations were 4.5 and 13 h, and the optimum temperatures were $29.1^{\circ}C$ and $29.2^{\circ}C$, respectively. From the yuzu medium study, the regression equations to be required wetness period achieving 10% and 50% germinations on various temperatures were $Wh_{50%}=0.1093{\times}T^2-6.3762{\times}+106.08$ and $Wh_{10%}=0.082{\times}T^2-4.8025{\times}T+74.861$.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.8
• /
• pp.17-28
• /
• 2015

The purpose of this study is to measure the volumetric water content of unsaturated soils during drying and wetting process by using volumetric pressure plate extractor (VPPE) incorporated with time domain reflectometry (TDR). The VPPE consists of a pressure cell, a pressure regulator, a burette system and a TDR probe. Two samples with different initial void ratios were prepared in the pressure cell, and the air pressure at the range of 0.1 kPa - 50 kPa was applied to adjust the matric suction by the pressure regulator. The burette system was used to measure the volumetric water content change of the sample according to the matric suction. In addition, the TDR probe, installed in the cell, was used to evaluate the dielectric constant from the reflected signal of the electromagnetic wave at the probe. The volumetric water content of specimen was estimated by the empirical equation between the volumetric water content and dielectric constant, which was calibrated with the Jumunjin sand. The test results show that the volumetric water content calculated by TDR probe is strongly correlated to the measured value by burette system. The hysteresis occurs during drying and wetting process. Furthermore, the degree of hysteresis reduces in the repeated process. This study suggests that TDR may be effectively used to evaluate the water content soil for the determination of water characteristic curve of unsaturated soils.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.13-22
• /
• 2013

This paper presents the results of a numerical investigation into the behavior of retaining wall subject to cycles of wetting and drying due to rainfall. The stress-pore pressure coupled finite element modeling strategy was first established for stimulating the wall behavior. A series of finite element analyses were then performed on a range of conditions including different rainfall and backfill conditions. The results indicated that the rainfall intensity was the primary influencing factor for the wall behavior. Also revealed was that the pre-rainfall condition determines the magnitudes and the distribution of matric suction which in fact has a significant impact on the behavior of wall during a major rainfall. This result demonstrates the importance of incorporating the pre-rainfall condition for numerical modeling of walls during heavy rainfall. Practical implications of the findings from this study are discussed in great detail.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1023-1026
• /
• 2008

과거에 수문자료 시계열 모의기법은 수자원시스템 설계에 사용되는 일강수량 모의에 주로 이용되어 왔지만 최근에 기후변화에 따른 수문사상의 변동성을 평가하기 위한 기본 자료 모의를 위한 방법론으로 많이 이용되고 있다. 수문시스템에서 강수는 현상의 발생여부에 따라 건조일과 습윤일이 교대로 반복되는 과정으로 구성되어 있으며 건조일, 습윤일 등으로 구분하고 습윤일의 강수량을 상태별로 분류하여 각 상태별 천이확률을 계산함으로써 장래에 발생 가능한 강수사상의 모의 발생이 가능하다. 기후변화 영향 평가 연구에서 가장 중요한 문제 중의 하나는 기후변화로 기인하는 수문사상의 전체적인 거동의 변동사상을 추정하는 것이며 이를 기존 모형들과 연계시키는 방법이라 할 수 있다. 이러한 관점에서 본 연구에서는 천이확률 및 강수 모의에 이용되는 Gamma 확률분포와 같은 분포형의 매개변수들이 우리가 목적으로 하는 월강수량 또는 계절강수량의 총량을 유사하게 모의할 수 있도록 CWGEN(Cross-validated Canonical Correlation Analysis-Weather Generator)를 도입하였다. 이를 국내 강수 지점을 대상으로 검토 평가하였다.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.95-104
• /
• 2006

Hysteresis is a common feature exhibited in hydraulic properties of an unsaturated soil. This study focuses on hysteresis observed in a compacted weathered granite subgrade soils based on the pressure plate laboratory tests. It was found that the Soil-Water Characteristics Curve of a soil is hysteretic and unique. The results also show that the wetting and drying curves predicted using the Fredlund and Xing model is quite close to the laboratory-measured results. For a specific matric suction, water content or coefficient of permeability on a wetting curve is always lower than those found on a drying curve.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.3
• /
• pp.47-58
• /
• 2014

To investigate the unsaturated characteristics of the tailings obtained from the waste dump at Imgi mine, matric suction and volumetric water content were measured in both drying and wetting processes using Automated Soil-Water Characteristics Curve Apparatus. Based on the measured result, Soil Water Characteristic Curves (SWCC) were estimated by van Genuchten model. According to the unsaturated soil classification method, the tailings of the waste dump correspond to clayey sand. As a result of Suction Stress Characteristic Curve (SSCC) by Lu and Likos model, SSCC has a shape of S which is similar to SWCC. The hysteresis phenomenon occurred in SSCCs, which means the suction stress of drying path is larger than that of wetting path in the same effective degree of saturation. The effective stress of unsaturated soil is equal to that of saturated soil when matric suction is less than Air Entry Value (AEV). However, the effective stress of unsaturated soil is larger than that of saturated soil when matic suction is more than AEV. Meanwhile, unsaturated hydraulic conductivity by van Genuchten model decreased with increasing matric suction, and the hydraulic conductivity of drying path is larger than that of wetting path.