• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.11
• /
• pp.990-995
• /
• 1998

본 연구에서는 PZT(20/80)과 PZT(80/20) 금속 alkoxide용액을 Pt/Ti/$SiO_2$/Si 기판위에 상호 반복시킨 강유전성 PZT(20/80)/PZT(80/20) 이종층 박막을 제작하였다. 건조와 소결을 한번 행한 PZT 이종층 박막의 평균 두께는 약 80~90 nm이었다. 제작된 모든 PZT 박막은 rosette상이 없는 치밀하고 균질한 미세구조를 나타내었으며, 하부의 PZT층은 열처리시 상부 PZT층은 열처리시 상부 PZT 박막의 페로브스카이트 형성에 대해 nucleation site로 작용하였다. 유전상수, 피로특성 및 누설전류특성 등은 단일 조성의 PZT(20/80), PZT(80/20) 박막에 비해 우수한 특성을 나타내었다.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.110-118
• /
• 2004

In order to evaluate two-step treatment of PEG-freeze drying for highly-degraded waterlogged ash woods (Fraxinus PP.; ca. 5,700 BP), which were excavated from peat lands in western Korea, dimension stability was examined during 45 months after complete treatment. The samples pre-treated with PEG in water solution showed better dimensional stabilities than the ones with PEG in t-butanol(TBA) solution. It suggests that TBA reduced the flexibility of wood cells and overflying by TBA induced micro-checks during freeze drying. Micro-checks results in fragile wood structures and consequently, large shrinkage by moisture absorbances of high PEG contents during exposure in humid condition. The results suggest that PEG in water-solution treatment is better than PEG in t-butanol as pretreament for freeze drying of highly-degraded waterlogged ash woods.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.624-633
• /
• 2012

This study was executed to provide the basic data that can be helpful for a program aiming at the enhancement of life quality or establishment of policy related to public health by analyzing the importance of health state among the middle-aged adults when it came to the decision of life quality. For 160 adults who were older than 40 years old, a survey was conducted and the results were derived by using t-test, one way ANOVA, and multiple regression analysis. Followings are the outcome of the study. According to such results, it was known that the level of general life quality and oral health related life quality were shown to be different depending on symptoms of depression and xerostomia. Therefore, it suggests that prevention and early intervention of depression and xerostomia will make a great contribution to improve the life quality among the middle-aged adults.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.88-95
• /
• 2008

The shrinkage of wood members after construction has been a greater and common concern in wooden buildings with the durability. Particularly, the traditional structure applying solid members actively is easily exposed to the shrinkage that caused by the joints, members, and walls. Moreover, even though domestic larch glulam members are widespread recently in the post-beam construction, the shrinkage (swelling) problem is still the critical defect on the wooden structures by the moisture content change in Korea. Various moisture contents were applied for the specimens to survey the dimensional changes for Japanese larch solid and glulam specimens, and the glulam specimens varied in the number of their laminations. Test results showed that glulam specimens with over 3 bonding layers showed good dimension stabilities. Therefore, to solve the shrinkage problem, sufficient drying fitted to the end-use service conditions should be conducted on the solid or glulam members can be applied.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.206-211
• /
• 1987

In an attempt to improve the quality stability of dried layer (Porphyra yezoensis Ueda), during longterm storage and distribution, a 6 months storage trial at different temperature and packaging condition was conducted. Dried layer samples were prepared by conventional procedure with different washing condition and $5^{\circ}C$ and $30^{\circ}C$ were employed as storage temperature. The moisture sorption isotherm was drawn at $5^{\circ}C$ and $25^{\circ}C$ and BET equation was prepared from the moisture sorption isotherm. The monolayer moisture contents of dried layer were 7.4% at $5^{\circ}C$ and 6.4% at $25^{\circ}C$, respectively. It was also found that the changes in comprehensive quality of dried layer during storage was much less at low temperature and the degree of washing before drying process as far as its moisture contents are lower than monolayer moisture contents. With regard to the packing methods, vaccum packing was superior to air containing packaging for the maintainance of quality during storage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.709-712
• /
• 2008

RC super tall buildings are planned and constructed recently in domestic area. Concrete is characterized by time dependant material such as creep and shrinkage. For this properties of concrete, differential shortening is one of the main issues on super tall buildings construction. This study includes material research, which is performing as a pre design stage to solve differential shortening on Lotte Super Tower Jamsil core structure(50, 60, & 70 MPa). The major part of this study is composed with comparison and analysis between experimental data and predicted data on total shrinkage and total compliance which were used on design stage. Four models, ACI209R Model, Ba${\check{z}}$ant-Baweja B3 Model, CEB MC99 Model, & GL2000 Model, were employed to predict them. It also tries to seek a proper model for high strength and high performance concrete in the case of no concrete test.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.501-505
• /
• 2003

SrZrO$_3$ resistive oxides on Ag tapes were prepared by the sol-gel and dip coating method to investigate the effect of PVP content and drying condition on microstructure of the films. Although the film thickness increased with the addition of PVP, the amount of PVP and heat treatment were not effective to reduction of formation of microcracks at the films. However, lower drying temperature and longer drying time were beneficial to control the microcracks of the SrZrO$_3$ films, indicating that the microcracking of the films was governed primarily by the drying condition.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.220-225
• /
• 2003

Generally, liquid radioactive wastes generated in nuclear power plant exist in powder form which do not contain moisture through the evaporating process of the Liquid Waste Management System and drying process of the Concentrated Waste Drying System. This powder form wastes are blended homogeneously with paraffin solidification agent and packed in metal drum to ensure its stability during handling and disposal. However, it was experienced that the powder form wastes were not blended homogeneously and separated into two layers in metal drum, on the other hand, a Portion of powder was adhered and solidified to the Inside parts of facility during the blending process. And the flaw of blending process above would come in case the mole ratio of Boron to Sodium in liquid radioactive wastes exceeds 0.2.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.05a
• /
• pp.203-206
• /
• 2004

활성탄 흡착을 통한 도장공정의 건조작업시 발생하는 VOCs 가스중에서 많은 양을 차지하는 톨루엔의 흡착실험의 결과는 아래와 같다. 활성탄을 충전한 고정흡착탑에서 톨루엔의 흡착에 있어서 파과곡선의 파과점은 흡착제의 포화특성에 좌우되며, toluene 가스의 농도, 유량이 증가할수록 감소하였다. 활성탄의 동일한 충전층에 대해 toluene 가스의 유량, 농도가 증가할수록 MTZ와 LUB도 증가함으로 흡착층의 효율이 감소하는 것으로 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.398-403
• /
• 1978

Squid was dried on the fluidized-bed in the drying chamber filled with solid particles which were also fluidized with hot-air, and effects of the fluidized particles, the squid's height from the grid and the drying temperature on the drying rate and quality of the squid were observed The mechanism of moisture transfer during the falling rate period was also derived. 1. Sodium chloride was found to be the most suitable fluidized particles and at an air velocity of 3.8 m/sec, optimal fluidization state of this particle was obtained. 2. Uniform profiles of temperature were obtained at a point 4 cm above the grid and the location of squid on the fluidized-bed observed to be suitable when it was 4 cm above the grid. 3. At an air velocity of 3.8 m/sec and when the location height of the squid on the fluidized-bed was 4 cm, the optimal temperature for the drying time which is required to reduce the moisture from 80.8% to 18-22% was 8.5 hours. 4. Drying data followed the empirical equation of unsteady state diffusion $log\;(\frac{W-We}{Wc-We})=-m{\theta}$ in the region of the moisture contents measured and the drying constant (m) was calculated as $0.32hr^{-1}$. These results suggested that the migration of moisture during the falling rate period is due to a diffusion type mechanism. 5. The short constant rate period was observed in the early stage and thereafter, drying was controlled by the falling rate period, and the time ratio of the fluidized bed drying to the through circulation drying for reducing the squid's moisture contents to the same level at the same drying temperature was 1 : 1.4 6. Comparisons of fluidized-bed dried squid and sun dried squid in sale showed that there was no significant change in qualities such as external appearance and hydrogen ion concentration of dry product.