• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.97-99
• /
• 2005

현장에서 사용중 고압전선에 고장이 발생한 6.6kV 건식변압기 고장의 원인분석을 위하여 설계와 제조방식이 동일하고 사용기간이 비슷한 건식변압기에 대한 전기적 열적 시험을 실시하였다. 전기적 시험으로서는 교류 및 충격 내전압시험, 부분방전시험을 실시하였고 열적시험으로는 단락법을 사용하여 온도를 상승시켰으며, 내부 및 외부권선표면의 온도분포와 열화상에 의한 온도분포를 측정하였다. 시험결과 부분방전특성이 기준치에 비하여 높게 나타났으며, 권선온도분포는 사용한계온도이하인 것으로 분석되었다.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.117-121
• /
• 1996

육각판상 Ba-ferrite의 stacking 현상은 자성도료의 도포 후 자장배향를 행할 때 일어나는 것으로 알려져 있으나 분말의 건식분쇄시에도 일어났다. Edge mill을 사용하여 건식분쇄할 때 치환형 Ba-ferrite 분말의 보자력과 tap density는 거의 비례적으로 증가하였고, 분쇄시간보다는 가해지는 압력에 크게 의존하였다. 이 때 보자력의 증가원인은 분쇄시 생성되는 입자간의 stacking 현상에 기인된 것임을 투과전자현미경 관찰로부터 확인하였다. 분말의 tap density가 증가함에 따라 tape에서 분산초기의 광택도가 크게 감소되어 분산성은 떨어졌으나, 배향도는 tap density 1.3 g/$cm^{3}$에서 최대를 나타내었다. 과도한 건식분쇄에 의해 생성된 강고한 stacked cluster는 자성도료 제조시 분산성과 배향도를 동시에 떨어뜨리는 역할을 함을 알 수 있었다.

• Environmental engineer
• /
• s.120
• /
• pp.26-37
• /
• 1996

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.313-320
• /
• 2017

Flue gas desulfurization gypsum(FDG) is produced when removing sulfur oxides from combustion gas generated by coal power plant. However, the recycling of FDG is still limited to the certain purposes. In order to expand the possible application of FDG, this study aims to utilize FDG as an activator for ground granulated blast furnace slag. FDG produced by dry- and wet-process were used for the experiments. Slag paste specimens were produced by mixing with deionized water and simulated pore solution, and the role of FDG as an activator for blast furnace slag was evaluated using hydration study by XRD analysis and compressive strength development. According to the results, dry-type FDG was found to work as an activator for blast furnace slag without the presence of soluble alkalis. However, wet-type FDG needs assistance by soluble alkalis in order to work as an activator for blast furnace slag. It was also found that the substitution of dry- and wet-type FDG into blast furnace slag can increase the 28 day compressive strength of slag paste. It is expected that efficient and economical recycling of FDG will be possible if quantitative analysis of strength enhancement according to substitution rate of both dry- and wet-type FDG.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.549-558
• /
• 2014

Buckling restrained braces(BRBs) developed as a seismic protection element, hysteretic damper, have been investigated in America and Japan mainly. BRBs are composed of a steel core and concrete-filled steel casing. It is one of the major causes of drop in productivity to fill the steel casing with concrete. To improve this problem, the BRB is introduced in which the steel core is restrained with a pair of semicircular springs. In this paper, the numerical and analytical investigation about the desirable configuration for a semicircular spring is presented. Firstly, the stiffness and strength of semicircular spring is determined theoretically to buckle into a very high-order modes. Then, the required stiffness and strength are calculated under the practical design conditions and considered as reference values to find a proper configuration. The material strength and thickness of semicircular spring are chose from the finite element analysis for 5 semicircular springs with varying height. Finally, the nonlinear buckling analysis of BRB with proper semicircular springs shows that the bucking strength of the whole BRB is very similar to the strength of steel core with length between semicircular springs.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.403-409
• /
• 1993

In this paper, an $NH_3$, added during dry oxidation and annealing m Si( 111) is clarified effect ive to suppress or remove defects. Annealing effects in $N_2$ and $NH_3/N_2$ ambient are estimated with dry $O_2$ and $NH_4$ oxidation($NH_3$ added in dry $O_2$ oxidation) method. C;em'rated defects in dry $O_2$ oxidation are lengthened according to oxidation time. but any defects in $NH_3$ oxidation are not found. Dry oxidation, after $NH_3$ oxidation as an initial oxidation. lias the defect -removing effect at the interface of Si -$SiO_2$. After dry or $NH_3$. oxidation. the annealmg 7.5% $NH_3/N_2$ ambient brings out gettering effect of OSF. The annealing in 7.5% $NH_3/N_2$ ambient for NI L oxidation method decreaSE,s $NH_3$ length of OSF about 20 % compared with dry oxidation method. Tlw feature of OSF is pit type, the gettering is directed to (011) plane for (111) plane. and OSFs are etched following to 110) directIon.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.95-104
• /
• 2005

The research conducted to study the potential practicability of recycled aggregate concrete by analyzing the characteristics of concretes made of recycled quality aggregates produced by wet and dry process has found the following results. The air content of recycled aggregate concrete increased with increase of the substitut on rate due to mortar included while producing recycled aggregates. However, the concretes with aggregate produced by dry process had relatively low rate of increase in air content. The slump showed generally decreasing trend as the substitution rate of recycled aggregate increased regardless of the wet or dry process. It was assumed that the mortar particles remained in recycled aggregate absorbed the surplus hydration in concrete and decreased fluidity The compressive strength generally decreased as the substitution rate of recycled aggregate increased, however there was an increasing trend as well due to decreasing effect of water-cement ratio when the substitution rate of recycled aggregate reached 25, 50% after mix. This phenomena also appeared in early age, which meant that recycled aggregate concrete should not be retarded in setting when applied in the field. The tensile strength also reached the maximum when wet or dry recycled aggregate replaced with 25%. To conclude, recycled aggregates for concrete produced by wet or dry process are expected to demonstrate essential characteristics of concrete without significant decline in physical or dynamic quality when the substitution rate is below 25% although there are variations subject to water-cement ratio. However, slight differences are expected due to types of recycled aggregate and physical quality.

• Journal of Radiation Protection and Research
• /
• v.21 no.4
• /
• pp.313-327
• /
• 1996

As an at-reactor(AR) storage method o( spent fuel, there are horizontal concrete module type, metal storage cask type, concrete storage cask type, dual purpose (transportation and storage) cask type and multi-purpose (transportation, storage and disposal) cask type. All other types except multi-purpose one have been already used for AR dry storage of spent fuels after obtaining operation license in various foreign countries. Also the development of multi-purpose type has been continued for operation license. In America, Japan, Germany, Canada, Spain, Switzerland, and Czech Republic, etc., AR dry storage facilities are under operation or on propulsion, and spent fuels are transported to interim storage facility or reprocessing plant after dry storage at reactor temporarily. At Wolsung site, in case of Korea, concrete silo type has already been introduced, and it is believed to be inevitable to store spent fuels at reactor temporarily, considering the reality that storage capacity of spent fuel is approaching to the limit in some nuclear power plants. In this report, the system characteristics, design requirements, technical standards and status of AR storage system, which is suitable for domestic site such as Kori, have been studied. In most cases, the licensed period of storage cask is limited up to 20 years and the integrity of material and maintenance of leaktightness are required during the whole service life.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2015

The aim of this research is suggesting dry processed bottom ash as a new and economical source of lightweight aggregate for mortar and concrete. The dry process of bottom ash is an advance method of water-free and no chloride because only cooled down by double dry conveyer belt systems. Furthermore, because of relatively slow cooling down process helps burning up the remaining carbon in bottom ash. Using this dry process bottom ash, to evaluate the feasibility of using as a lightweight aggregate for mortar and concrete, two-phase of experiments were conducted: 1) improving shape of the bottom ash, and 2) controlling grade of the bottom ash. From the first phase of experiment, additional abrasing process was conducted for round shape bottom ash, hence improved workability and compressive strength was achieved while unit weight was increased comparatively. Based on the better shape of bottom ash, from the second phase, various grades were adopted on cement mortar, standard grade showed the most favorable results on fresh and hardened properties. It is considered that the results of this research contribute on widening sustainable method of using bottom ash based on the dry process and increasing value of bottom ash as a lightweight aggregate for concrete.

• Journal of Food Hygiene and Safety
• /
• v.35 no.2
• /
• pp.170-176
• /
• 2020

We investigated the pH, volatile basic nitrogen (VBN), microbial changes and dominant microbes in raw beef, wet-aging beef, and dry-aging beef after the meat had been stored in a refrigerator. The count of mesophilic bacteria was 3.3-3.9 log CFU/g in raw beef and dry-aging beef, and 5.4 log CFU/g in wet-aging meat. After 18 days of refrigeration, the mesophilic bacterial count in raw and aging beef increased to 6.1-6.4 log CFU/g. In wet-aging beef, the number of lactic acid bacteria increased from 4.5 log CFU/g to 6.0 log CFU/g at refrigeration temperature. However, lactic acid bacteria were not detected in dry aging beef. Major foodborne pathogens such as Salmonella spp, Listeria monocytogenes, and Escherichia coli (EHEC) were not detected. Based on the legal standard for mesophilic bacteria count, the estimated shelf-life of aged beef was less than 12 days and the average VBN was 15 mg%. The dominant microorganisms varied between the different types of meat. In raw meat, Staphylococcus saprophyticus was the dominant microorganism, and as the VBN increased, Carnobacterium divergens dominated. In wet-aging beef, Carnobacterium divergens dominated during the initial days of refrigeration after which the number of Lactobacillus sakei increased. Dermacoccus nishinomiyaensis was initially the dominant microbe in dry-aging beef, after which Pseudomonas fragi dominated. In addition to the role of specific bacteria in the early stage of decay, it is thought that microorganisms can be utilized for safe distribution and storage of matured meats by conducting research on changes in rot, fragrance analysis, and changes of ingredients in matured meats.