• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.35-40
• /
• 2014

Wire drawing is aplastic deformation process that produces a wire with a desired diameter by pulling the end of the wire through a die. During the cold wire drawing process, the temperature between the wire and the die bearing is increased. This temperature increase causesenergy consumption increase, bad wire quality, and decreased die life. To reduce friction and avoid high temperature between the wire and the die in the cold wire drawing process, a dry lubricant with soap particles is used. It is not possible to reused the lubricant onceiron oxide is attached to the soap particlesat high pressure die. In this study, recycling technologies for wasted soap particles with processes of crushing, separation, and screening are developed. From the evaluation, the recycling efficiency was found to be 86.97%.

• ETRI Journal
• /
• v.10 no.1
• /
• pp.96-108
• /
• 1988

반도체 소자의 집적도가 증가하고 최소선폭이 감소함에 따라 소자가공시 그것이 중간중첩 정도(overlay accuracy)에 미치는 요인을 파악하였고, 광학적 노광장치에서 오는 한계성을 촛점심도(depth of focus) 측면에서 고찰하였으며, 차세대 노광장치인 전자빔 및 X-선 노광장치에 대해 그 장단점을 파악하여 $0.5\mum$ 이하 선폭 가공시 적당한 노광장치에 대해 기술하였다. 또한 이상적인 패턴 전사를 위한 건식식각시의 여러 문제점을 나열하고 그 해결책을 논하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2003.04a
• /
• pp.101-107
• /
• 2003

국내에서는 90년대 후반 이후부터 건식코팅 중 제조공정이 단순하고 제조비용의 부담이 적으며 생산속도가 빠른 친수성 폴리우레탄 수지를 사용한 비다공질 투습방수포가 점차 확대되어 일반적으로 많이 제조되어지고 있다. 친수무공형 투습방수포는 다공질형의 투습방수포와는 달리 연속적인 비다공질의 solid한 코팅 층으로 구성되어진다. 이러한 비다공질 막은 물에 대하여 내수압이 뛰어나며 투습도는 친수성 피막의 두께에 반비례하는 특징을 가지고 있다. (중략)

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.319-320
• /
• 2009

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.05a
• /
• pp.147-148
• /
• 2007

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.279-280
• /
• 2009

• Journal of Radiation Protection and Research
• /
• v.21 no.2
• /
• pp.117-124
• /
• 1996

Source intensities in terms of the exposure rates at 1m from the fresh and spent DUPIC fuels, made from standard and extended turnup PWR fuels, were analyzed. Two cases were studied based on the degree of elimination of removable elements. Homogeneous mixture model was applied to get the exposure rate. The exposure rate turned out to be very high and sensitive to Cs elimination during the dry process. About 90% of exposure can be reduced in the case of fresh DUPIC fuel made from 10-year cooled spent PWR fuels if Cs is fully removed during the dry process. The main radiation source in spent fuels is Cs-137. The dry storage of spent DUPIC fuel may need a longer wet storage period and require a further review.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.129-132
• /
• 2003

Used cutting fluid from machining processes is harmful to both environment and human health. Chemical substances that provide the lubrication function in the machining process are toxtc to the environment if the cutting fluid is released to soil and water and caused serious health problems to workers who are exposed to the cutting fluid in both liquid and mist form. Recently. cost of using cutting fluid is increasing as the number and the extensiveness of environmental protection laws and regulations increase. Therefore, the use of cutting fluid in machining processes place an enormous burden on manufacturing companies to cover the additional costs associated with their use and protection of our environment. Current trends in manufacturing are focused on minimizing or eliminating the use of metalworking fluids in machining processes. And the increased costs for the disposal of waste products (swarf, coolants and lubricants), especially in industrially developed countries, has generated interest in dry machining. A variety of new techniques are testimony that new technology has rationalized further efforts to research and implement dry machining processes. This paper presents the developed equipment, the process optimization and the applications in the field of surface grinding for the new cryogenic dry machining using a compressed cooling air. The investigated new machining process method shows many advantages compared to conventional techniques with cutting fluid.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.92-92
• /
• 2011

본 연구에서는 Beam Printing 기술을 활용한 Streaky Effect 세섬도 Memory Span 고감성 패션의 류 소재개발로, 기존 비(非)신축성 메모리 소재에 신축성을 부여하고, 에너지 절감(50%) 및 유출폐수(건식공정)가 없는 독창적인 디자인과 차별화된 looking을 갖는 염색견뢰성이 우수한 고감성 소재를 개발하고자 한다.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.6
• /
• pp.1065-1070
• /
• 2015

A high-yield Korean rice cultivar cv. Boramchan and Hanmaeum, and rice cultivar for use in staple cv. Hopum were prepared and investigated for their physiological characteristics. Water content, water holding capacity, amylose content, damaged starch content, particle size, and pasting properties of the rice flours were measured. Moisture content of the Boramchan and Hanmaeum, made under wet and dry milling conditions, were as follows: wet conditions (14.79% and 13.56% respectively) and dry conditions (7.98% and 7.14% respectively). Water holding capacity of the Boramchan and Hanmaeum made by wet milling condition was 236.67% and 231.35%, respectively. Water holding capacity of the samples made by dry milling condition showed a higher score compared with other samples. The amylose content of Hopum, Boramchan, and Hanmaeum made by dry milling condition were 19.12%, 19.55% and 19.59%, respectively. Damaged starch contents of the samples made by wet milling showed a lower score. Final viscosity of Hopum, Boramchan, and Hanmaeum made by wet milling condition was 2,604, 3,052, and 2,917 cp, respectively. In this study, the results indicated that the super-yield Korean rice flour made by wet milling condition tends to show a lower water holding capacity, damaged starch contents and particle size, as compared to controls. However, a setback of the super-yield Korean rice flour was a higher score as compared to the controls, regardless of the milling conditions.