• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.36-41
• /
• 2016

In order to take advantage of the building as an energy demand resources, it requires automated systems that can respond to the demand response event. Load aggregator has been started business in Korea, research and development of building energy management and demand response systems that can support them has been active recently. However, the ratio of introducing automated real-time demand response systems is insufficient and the cost is also high. In this research, we developed a building energy management system and OpenADR protocol to participate in a demand response and then evaluated them in real building. OpenADR is a standard protocol for automated system through the event and reporting between load aggregator and demand-side. In addition, we also developed a web-based building control system to embrace different control systems and to reduce the peak load during demand response event. We verified that the result systems are working in a building and the reduced load is measured to confirm the demand response.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2010

Thermal comfort provide satisfaction of thermal environment and affects productivity of occupants in residential building. However, temperature control can not provide the thermal comfort at all the time. because thermal comfort is influenced by many environmental variables such as temperature, relative humidity, air velocity, radiation temperature, activity level and clothing insulation. The purpose of this study is that predicted mean vote(PMV) index is used as control. And, Thermal comfort is evaluated both PMV control and temperature control by simulation. Each other cases were compared, in which set-point temperatures of $22^{\circ}C$ and $24^{\circ}C$ and, set-point PMV index through the respective heating season in the simulation. The results show that PMV control is better to maintain comfort state and save energy than temperature control.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.6
• /
• pp.669-674
• /
• 2012

D-Cube City is a recently completed multi purpose building consisting of four types of facilities; offices, a department store, a hotel, and congregation spaces. A community energy supply system(CES) has been installed to supply this building with electricity, steam, heat, and cold water. The BEMS, building energy management system, is currently being designed to reduce building energy consumption through the efficient operation of the various pieces of building service equipment. In this study the optimal methods for operating the CES of D-Cube City were considered. This system includes three combined heat and power systems, seven steam boilers, two hot water boilers, two absorption chillers, and four turbo chillers, and various other pieces of equipment. In result, the optimal methods of operating the CES for various energy demand levels were obtained along with the seasonal effects on the economic efficiency of the operation. The effect of the amount of energy demanded by the various facility areas on the total energy consumption was also analyzed.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.876-883
• /
• 2015

Han-green project, which pursues Korean style post and beam timber house with traditional construction technique of Han-ok, has been carried out in KFRI (Korea Forest Research Institute) since 2006. Recently, the improvement of its building energy performance was studied with energy-saving elements. This study was conducted to provide the insulation details of building envelopes in a post-beam timber house for recent enhanced insulation standards and following effect on building energy performance. The level of thermal transmittance (U-value) values of building envelopes was composed of two stages: present Korean insulation standards and passive house. To evaluate building energy performance, the building airtightness values of two stages was ACH50 = $3.0h^{-1}$ for common domestic timber house constructed recently, and ACH50 = $0.6h^{-1}$ for passive house. Consequently, four cases of the building energy performance according to the combination of U-value with airtightness were evaluated. The test house for evaluation was located in Seoul and its energy performance was evaluated with CE3 commercial building energy simulation program. The result showed that enhanced insulation from level I to II reduced $14kWh/(m^2{\cdot}a)$ of annual heating energy demand regardless of airtightness.

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.223-230
• /
• 1998

Energy consumption statistics have been surveyed for 50 large commercial buildings with high energy consumption records in Seoul City. The buildings were classified into three different groups for data analysis: hospitals, hotels, and department stores/office buildings. The analysis was focused on identifying installed boiler and refrigerator data, energy consumption rates, and energy load distribution throughout the year. Refrigerating electricity was confirmed again to affect most on the formation of the summer electricity load peak as expected. Replacing the refrigerator electricity peak in the summer with co-generation in large commercial buildings. However, overall heat load distribution in a single building is still considered not large enough for economically feasible co-generation and thus joint co-generation for multiple neighboring buildings are preferred and the Electric Power Law and LNG pricing policy should be revised favorably for co-generation in advance.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.05a
• /
• pp.35-41
• /
• 2002

최근 건물에서 사용되는 조명에너지 절감을 위한 방안으로 고효율 램프, 반사갓 교체 등 ESCO관련 사업과, 친환경 조명 기술 개발이 한창이며 이러한 시점에서 첨단 건물의 실내조명에 있어서도 기존 전기조명보다는 자연채광을 선호하는 경향이 나타나고 있다. 자연광은 실내에서 사용되는 일반적인 조명에 비해 200배 이상이나 강하기 때문에 이 빛을 효과적으로 쓸 수 있는 기술개발에 노력을 경주하고 있다.(중략)

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.8
• /
• pp.7-14
• /
• 2003

건물에너지 성능평가 결과의 신뢰성 검증을 위해 가장 먼저 확인하는 요소 중의 하나가 어떠한 기상데이터를 적용했는가일 것이다. 아쉽게도 국내의 경우 아직까지 공인된 표준기상자료가 확립되어 있지 못한 실정이며, 이로 인해 다양한 프로그램을 통한 해석결과의 객관성 확립에 많은 어려움을 겪고 있다. 본 고에서는 건물에너지 성능평가를 위한 시간별 기상자료를 대상으로 국외 및 국내의 개발현황을 고찰하고, 향후 개선방향을 제안하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.279-280
• /
• 2015

본 연구는 건물 에너지 효율 향상을 위한 단기 저비용 건물 에너지 통합 평가 진단 시스템 기술을 지원하는 스마트 미터링 인프라 구축 기술 개발에 대한 연구로, 단기 저비용 네트워크 구축을 위해 통신 라인을 신설하지 않는 PLC 기술 및 무선 통신 기술을 적용하여 빌딩내 스마트 미터링 인프라 구축에 대한 적용 사례에 대한 연구이다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.605-608
• /
• 2019

기계학습 기술을 이용하여 자동화된 데이터 수집 시스템을 적용하면, 기존 아날로그 측정기의 수치를 자동으로 인식 및 저장할 수 있으며, 재실 여부 등의 건물에서 발생하는 에너지 관련 현상을 데이터베이스로 구축하고, 이 데이터를 기반으로 효과적인 건물의 에너지 운전 방안을 제시할 수 있다. 본 내용은 기계 학습을 이용한 소프트웨어 기술이 건물 에너지 모니터링 시스템에 적용되는 장점에 대해 소개하고 적용에 따른 예상 효과를 기술한다.

• Prospectives of Industrial Chemistry
• /
• v.14 no.2
• /
• pp.10-25
• /
• 2011

지속적으로 증가하고 있는 에너지 수요에 대처하기 위해 신재생에너지 기술 확보를 위한 노력이 계속되고 있다. 연료전지는 풍력, 태양전지와는 달리 환경적 제약 없이 연속적인 에너지 공급이 가능하여 건물용 분산발전용으로 적합한 요건을 갖추고 있다. 최근 시작된 시범보급 사업으로 건물용 연료전지의 초기 시장 진출이 시작되었고 공공 기관 대체에너지의무화와 그린홈 보급사업 시행으로 시장 확대가 기대된다. 본 논문에서는 건물용 연료전지 시스템의 기본원리와 국내외 개발 동향에 대해 살펴보았으며 핵심부품에 대한 기술개발 현황에 대해 기술하였다.