• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.23-28
• /
• 2005

고해상도 위성영상으로부터 건물, 도로 등의 인공지물의 정보를 추출하기 위한 연구들이 현재 활발히 진행되고 있다. 대부분의 기존 연구들의 경우, 위성영상에서 3차원 건물정보를 추출하기 위해서는 영상과 별도의 기준점을 필요로 하며, 영상에서의 측정값을 3차원 정보로 변환하기 위해서는 센서모델링의 과정을 거쳐야 했다. 이 연구에서는 단안식 (Monoscopic)영상으로부터 이러한 복잡한 과정을 거치지 않고 직접 건물의 3차원 정보를 추출하는 기술개발에 대하여 소개한다. 제안하는 방식은 단안식 영상에서 영상의 방위각 및 촬영지역에서의 태양과 카메라의 방위각 및 고도각을 이용하여 건물의 높이가 주어졌을 때 이에 따르는 건물 수직선과 건물 그림자를 영상에 투영시키는 과정을 반복함으로써 투영된 건물 그림자가 실제 영상에서 관측되는 건물의 그림자와 일치될 대의 건물의 높이 값을 구하고 건물 지붕 외각선을 구해진 건물의 높이 값에 따르는 건물 수식선 만큼 수평 이동하여 건물의 위치를 구하게 된다. 실제 대전지역을 촬영한 IKONS 영상을 이용하여 실험한 결과 이와 같은 방법으로 취득 된 건물 높이값이 약 1m 내외의 정확도를 가지는 것을 나타났다.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.989-1006
• /
• 2020

Building change monitoring based on building detection is one of the most important fields in terms of monitoring artificial structures using high-resolution multi-temporal images such as CAS500-1 and 2, which are scheduled to be launched. However, not only the various shapes and sizes of buildings located on the surface of the Earth, but also the shadows or trees around them make it difficult to detect the buildings accurately. Also, a large number of misdetection are caused by relief displacement according to the azimuth and elevation angles of the platform. In this study, object-based building detection was performed using the azimuth angle of the Sun and the corresponding main direction of shadows to improve the results of building change detection. After that, the platform's azimuth and elevation angles were used to detect changed buildings. The object-based segmentation was performed on a high-resolution imagery, and then shadow objects were classified through the shadow intensity, and feature information such as rectangular fit, Gray-Level Co-occurrence Matrix (GLCM) homogeneity and area of each object were calculated for building candidate detection. Then, the final buildings were detected using the direction and distance relationship between the center of building candidate object and its shadow according to the azimuth angle of the Sun. A total of three methods were proposed for the building change detection between building objects detected in each image: simple overlay between objects, comparison of the object sizes according to the elevation angle of the platform, and consideration of direction between objects according to the azimuth angle of the platform. In this study, residential area was selected as study area using high-resolution imagery acquired from KOMPSAT-3 and Unmanned Aerial Vehicle (UAV). Experimental results have shown that F1-scores of building detection results detected using feature information were 0.488 and 0.696 respectively in KOMPSAT-3 image and UAV image, whereas F1-scores of building detection results considering shadows were 0.876 and 0.867, respectively, indicating that the accuracy of building detection method considering shadows is higher. Also among the three proposed building change detection methods, the F1-score of the consideration of direction between objects according to the azimuth angles was the highest at 0.891.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.9 no.1
• /
• pp.15-19
• /
• 2013

In this Study, effect of core position, area ratio and orientation of building on energy load is examined using TRNSYS17. This parameters are major parameters of the conceptual design stage. Reference model is square floor plan($1,444m^2$), centered core and 29% core area ratio. As the results, without considering the building orientation, the annual heating load of central building with 1:1 area ratio is lowest ($10.33kWh/m^2yr$) and the annual cooling load of off-central building with 1:1 area ratio is lowest ($59.27kWh/m^2yr$). As area ratio is bigger, cooling load is lower and heating load is higher. But if we consider building orientation, orders of heating load and cooling load are changed for area ratio and orientation.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_1
• /
• pp.879-891
• /
• 2018

In this study, the effects of urban redevelopment and building construction on the change of the detailed flows around the Pukyong National University (PKNU) campus located in the building-congested area was investigated using a CFD (computational fluid dynamics) model and GIS (geographic information system). For the analysis of the detailed flows before and after the constructions of the buildings around and within the campus, numerical simulations for the 16 inflow directions were performed before and after the construction. We used, as reference wind speeds at the inflow boundaries, the averaged wind speeds observed at the Gwangan light beacon (962) where there is no surrounding obstacle (i.e., building and terrain) acting as friction. We analyzed the area fractions in which wind speeds at z = 2.5 m changed after the construction for 16 inflow directions. The area fractions were relatively large in the east-south-easterly and southerly cases, because of the high-rise buildings constructed at the east and the apartment complex and the Engineering buildings constructed at the south of the PKNU campus. In the case of the easterly of which frequency is highest among the wind directions observed at the Daeyeon AWS (AWS 942) located inside the PKNU campus, the wind-speed change was not significant even after the constructions. It is shown that the building construction has affected the detailed flows around as well as even in the far downwind region of the constructed buildings. Also, it is shown that the GIS and CFD model are useful for analyzing the detailed flows in planning the urban redevelopment and/or building construction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.114-120
• /
• 2013

Recently, navigation systems based on wireless communication have been applied to the internal structures such as building or ship. If a stable azimuth information is obtained, these systems can effectively guide the direction of the user's progress through the information and then can improve the performance of guidance. Since conventional method which has acquired an azimuth information using geomagnetic and acceleration sensor(azimuth sensor hereafter) is sensitive to the effects of the magnetic field, it has unstable error range according to the surrounding environment. In order to improve these problems, this paper presents a new relative azimuth estimation algorithm using the displacement of a mobile node and its rotation angle based on Wireless communication. For the performance assessment of the proposed algorithm, experiments using rotating arm are performed and the results are confirmed that the proposed system can estimate the relative azimuth without using additional sensors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.165-175
• /
• 2007

Nowadays, architecture in urban areas is dominated by the goal of spanning wide spaces and creating openings large enough to distribute daylight to building interiors. Daylight availability of building in city strongly depends not only on the building's height but also on spaces between buildings. Recently numbers of disputes over the daylight availability are increasing in high density developed areas because residents' demand for pleasant residential environment is getting stronger. Therefore in this study we constructed the three-dimensional information of buildings using LiDAR data connected with digital map and then suggested conclusions by applying it to daylight availability analysis. This study presents an approach to judge accurately the violation of a right to enjoy sunshine by using altitude and azimuths of the sun, simulating three-dimensional urban space precisely, and classifying the total duration of sunshine and the continuous duration of sunshine each householder. We expect that local government performs precisely the confirmation and permission business about urban planning and design by advising this approach.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.71-79
• /
• 2009

We expanded the 3D building information extraction method using shadow and vertical line from single high resolution image with meta information into the method for single high resolution image without meta information. Our method guesses an azimuth angle and an elevation angle of the sensor and the sun using reference building, selected by user, on an image. For test, we used an IKONOS image and an image extracted from the Google Earth. We calculated the Root Mean Square (RMS) error of heights extracted by our method using the building height extracted from stereo IKONOS image as reference, and the RMS error from the IKONOS image and the Google Earth image was under than 3 m. We also calculated the RMS error of horizontality position by comparison between building position extracted from only the IKONOS image and it from 1:1,000 digital map, and the result was under than 3 m. This test results showed that the height pattern of building models by our method was similar with it by the method using meta information.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.193-203
• /
• 2015

In this study, effects of buildings and topography on observation environment of weather stations located on mountainous terrain in metropolitan areas are investigated using a computational fluid dynamics (CFD) model. In order to investigate the characteristics of flow pattern around the weather stations, geographic information system (GIS) data are used to construct surface boundary input data of the CFD model. In order to evaluate effects of buildings and topography on wind speed and direction at three weather stations located in Deajeon, Busan, and Gwangju., target areas around the weather stations are selected and 16 cases with different inflow directions for each target area are considered. The simulated wind speed and direction at the weather stations are compared with those of inflow. As a whole, wind speed at the weather stations decreases due to drag effects of the buildings and topography in the upwind regions. This study shows that GIS data and the CFD model are successfully applicable to evaluation of observation environment for weather stations.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.5
• /
• pp.11-19
• /
• 2017

The purpose of this study is to analyze the efficiency of PV according to installation condition in the complex type buildings. For this purpose, annual performance of solar power generation in a certain area was investigated and various methods were conducted including post operation evaluation. In addition, we tried to find out influencing factors that affect the efficiency and sought to identify their relative impact of degree through the data analysis and site visits together. In the middle of this process we can draw up major considerations for the efficient photovoltaic power generation installation. In the mean while, previous studies are making something new related with method for efficiency enhancement and individual influential factors based on experimental environment rather than the empirical data site based. As a result of the study, it was confirmed that even if installed in the same area, the power generation efficiency is 1.5 times as high as the installation condition. Furthermore, statistical analyses were performed on azimuth, tilted angle and shade, which are variables affecting conversion efficiency, and it was statistically confirmed that all variables are meaningful factors that affect the conversion efficiency which is a dependent variable. The most influential factor is the azimuth, followed by the tilted angle and the shade factor. From this result, we expect to be able to provide installation guidelines for the solar power generation equipments on the rooftop zone.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.386-389
• /
• 2008

This study has analysed power output characteristics of transparent thin-film PV module depending on incidence angle and azimuth. The simulation results was evaluated power outputs of transparent thin-film PV module depending on incidence angle and azimuth after calibrating the experimental and computed data. As a result, the best power output performance of transparent thin-film PV module was obtained at slope of $30^{\circ}$ to the south, producing the annual power output of 977kWh/kWp. The annual power output data demonstrated that the PV module with a slope of $30^{\circ}$ could produce a 68 % higher power output than that with a slope of $90^{\circ}$, with respect to the inclined slope of the module. Furthermore, the PV module facing south showed a 22 % higher power output than that facing to the east in terms of the angle of the azimuth.