• The Magazine for Energy Service Companies
• /
• s.69
• /
• pp.26-29
• /
• 2011

우리나라에서 사용하는 총에너지의 97%를 해외에 의존하고 있으며, 총에너지의 약 30%를 건물에서 소비하고 있다. 건물에서의 에너지절약 및 효율적 관리가 우리나라 정책방향인 저탄소 녹색성장에 크게 기여하리라는 것은 쉽게 예측할 수 있다. 최근 국내에서 건물의 효율적인 관리를 위하여 BEMS(Building Energy Management System)가 도입되고 있는 실정이다. 본고에서는 저탄소 녹색성장에 기여할 수 있는 건물에너지관리시tm템인 BEMS의 기술개발 현황과 그 동향에 대해 알아보기로 한다.

• 보일러설비
• /
• s.61
• /
• pp.56-63
• /
• 1999

태양열 이용은 대체에너지자원 가운데 가장 널리 분포되어 있고 기술력에 따라 얼마든지 사용할 수 있는 태양열에너지를 그 대상으로 하고 있기 때문에 자연친화적이며, 친환경적인 접근방식으로 기술 개발 및 이용보급 정책을 함께 추진해야 할 것이다. 건물에너지 절약 기술도 국가에너지수요의 $30{\%}$이상을 차지하는 광범위하고 다양한 건물에너지 수요를 효율화하고 절감하는데 그 목적이 있으므로 기존의 건물에너지 이용방식의 문제, 효율개선방안, 그리고 신기술개발 및 환경친화적 건축설계등 기술 개발과 건축관련 정책을 병행 추진해야 그 효과를 기대할 수 있다. 따라서 기술개발 계획 수립, 연구개발 수행, 기술 이전 및 상용화 그리고 실용화 보급정책 시행의 전과정에 걸쳐 상호 보완적이고 체계적인 운용으로 효율을 극대화하고 파급효과를 높일 수 있을 것이다. 본 논문에서는 국가 에너지기술개발 10개년 계획의 목표와 틀 안에서 대체 에너지 기술 개발사업과 에너지 효율향상 기술개발 사업에 포함되어 있는 태양열 이용과 건물 에너지 절약기술에 관련된 프로그램들을 중심으로 효율적 운영방안 등을 검토하고자 한다. 또한 각각의 프로그램들이 가지는 특성과 연관성을 검토하여 추가 보완사항이나 정책대안을 제시하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.11b
• /
• pp.69-71
• /
• 2008

에너지 다소비산업구조로 되어 있는 국내 산업시설 및 건축물 분야에서의 초에너지절약형 시스템으로의 개선이 절실하다. 전력다소비건물을 중심으로 대형건물의 시간대별 전력사용량과 년간 전력사용량을 조사하였고, 연면적, 계약전력, 최대수요전력 등의 전력소비 특성을 조사 분석하였다. 조사된 자료의 전체 특징과 중심적인 경향을 알아 보기 위해서 평균값, 표준편차, 최대값, 최소값, 중앙값 등의 특징파라메터를 분석하였다. 이를 토대로 에너지 성능 중심의 전력원단위 기준(안) 및 연간 전기에너지 사용 총량을 분석하였고, 전기에너지 연간사용총량 산정에 필요한 자료를 데이터베이스화하였다.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.131-144
• /
• 2016

Damage occur frequently around the world on climate change and the main cause of greenhouse gas emissions regulation is growing. To this end, the government has built integrated management system for national building energy. The building energy information is total 6.8 million complex. Integrated management system for national building energy database are matched building registers information and energy information of the supply agencies. However, the matching process has its limitations so advanced work is in progress continuously. This study analyzed integrated management system for national building energy database quality and limitations and deduce improvement plan to increase system reliability and availability. The existing database matching average rate is 85.6%. 58.2% of the total non-matching data type has no building information. To ensure the ease of new database matching and the accuracy of the existing database matching, address standarization and building properties system are needed between building information and energy information. Also, The system construction is required to include information on other energy sources like petroleum energy which has high proportion of non-urban areas and small residential areas and renewable energy which has high potential in development and utilization.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.117-126
• /
• 2014

This study developed a KRESS program designed to find the optimization ratio for new and renewable energy systems and analyze the effects of building energy consumption characteristics on the ratio. In spite of clear differences in predicted energy consumption and energy consumption by the loads among 18 facilities, the current formula for obligatory supply ratios applies a correction coefficient according to the building purposes based on energy consumption per each unit area in medical facilities and thus reflects no energy consumption characteristics according to the building purposes. The optimization ratio for new and renewable energy systems was the same for all facilities when the correction coefficients by the building purposes and new and renewable energy sources were all applied. When the correction coefficients were not applied, however, the optimization ratio varied according to building energy consumption characteristics. The findings raise a need to test the correction coefficients in order to select new and renewable energy systems that take into account energy consumption characteristics by the building purposes and loads and reflect economy, environmental performance, and technology.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.101-109
• /
• 2013

Recently, it is certain that the increase of heating and cooling energy consumption by radical change in climate condition has caused serious problems related to environmental and energy concerns associated with increase of fossil fuel usage and carbon dioxide production as well as global warming. So, various actions to reduce greenhouse gas exhaustion and energy consumption have been prepared by world developed countries. Our government has also been trying to seek energy control methods for houses and buildings by proclaiming political polices on low-carbon green growth and construction and performance standards for environment-friendly housing. The energy consumption by buildings approximately reaches 25% of total korea energy consumption, and the increasing rate of energy consumption by buildings is stiffer than the rate by the other industries. The greatest part in the buildings of the energy consumption is building facade. While lots of research projects for reducing energy consumption of the facade have been conducted, but a few research projects on concrete comprising more than 70% of outsider of buildings has been tried. This research presents here a study to improve the insulation property of structural concrete formed by micro form admixture (MFA) with experimentally reviewing the physical, mechanical and thermal characteristics of the concrete. As the results of this experiment, in the case of concrete mixed with MFA, slump loss has been improved. As the mixing ratio of MFA increases, the compressive strength is decreased and thermal conductivity is increased. Also it was found that water-cement ratio increases, the compressive strength is decreased and thermal conductivity is increased. but, there was not big influence by the change of fine aggregate ratio.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.47.1-47.1
• /
• 2010

태양전지는 태양광을 직접 전기로 변환하는 소자로서, 무공해 신재생 에너지로 각광받고 있다. 이러한 태양전지의 상용화를 위하여 발전효율과 경제성을 높이기 위한 많은 연구가 진행되고 있으며, 특히 도심형 건물의 외장재를 태양전지로 활용하는 건물통합형 태양광 발전 (BIPV : building integrated photovoltaics)등에 대한 연구가 활발하다. 따라서, 본 조사 연구에서는 태양전지 기판소재의 요구특성을 조사하고, BIPV용으로 적용 가능한 유연한 금속기판의 개발을 위한 기술적 방법을 제시하고자 하였다. 현재 태양전지의 기판은 비정질 혹은 결정질 실리콘 기판과 라임유리 기판이 주로 사용되고 있으며, 특수용도로 고가의 폴리이미드 고분자 필름이 사용되고 있다. 그러나 BIPV의 다양한 응용을 위해서는 저가의 유연한 기판이 절실히 요구되고 있다. 스테인레스 금속박판은 인성 및 강도가 우수하고, 유연하여 다양한 형태로 가공이 가능하며, 가격이 저렴하고, 다양한 표면개질기술이 적용될 수 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.85-88
• /
• 2009

This paper shows a reasonable power density, that was made by the systematic and statistical way considering actual conditions, such as investigated power consumption capacity for the year and peak power, contract power for the last 5 years of each customer for 23 general customers all data obtained by AMR. In this dissertation, it is necessary to analyze the key features from the investigated data. It made an analysis of the feature parameters, such as average, standard deviation, median, maximum, minimun and load factor.

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.223-230
• /
• 1998

Energy consumption statistics have been surveyed for 50 large commercial buildings with high energy consumption records in Seoul City. The buildings were classified into three different groups for data analysis: hospitals, hotels, and department stores/office buildings. The analysis was focused on identifying installed boiler and refrigerator data, energy consumption rates, and energy load distribution throughout the year. Refrigerating electricity was confirmed again to affect most on the formation of the summer electricity load peak as expected. Replacing the refrigerator electricity peak in the summer with co-generation in large commercial buildings. However, overall heat load distribution in a single building is still considered not large enough for economically feasible co-generation and thus joint co-generation for multiple neighboring buildings are preferred and the Electric Power Law and LNG pricing policy should be revised favorably for co-generation in advance.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2012

Recently, the government has been working feverously to save energy and reduce greenhouse gas emission by enacting Basic Act on Low Carbon Green Growth at the national level. Improving the insulation performance of building exterior and insulator can reduce the energy in the building sector. This study is about developing light-weight foamed concrete insulation panel that can be applied to buildings to save energy and to find the optimal condition for the development of insulation materials that can save energy by enhancing its physical, kinetic and thermal characteristics. Various experimental factors and conditions were considered in the study such as foam agent types (AES=Alcohol Ethoxy Sulfate, AOS=Alpha-Olefin Sulfonate, VS=Vegetable Soap, FP=Fe-Protein), foam agent dilution concentration (1, 3, 5%), and foam percentage (30, 50, 70%). Experiment results indicated that the surface tension of aqueous solution including foam agent, was lower when AOS was used over other foam agents. FP produced relatively stable foams in 3% or more, which produced unstable foams containing high water content and low surface tension when diluted at low concentration. Depending on foam agent types, compressive strength and thermal conductivity were similar at low density range but showed some differences at high concentration range. In addition, when concentrations of foam agent and foaming ratio increased, pore size increased and open pores are formed. In all types of foam agent, thermal conductivity were excellent, satisfying KS standards. The most outstanding performance for insulation panel was obtained when FP 3% was used.