• Magazine of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.15-20
• /
• 2002

갱폼이라 함은 주로 고층 아파트에서와 같이 평면상 상ㆍ하부 동일 단면 구조물에서 외부벽체 거푸집과 거푸집 설치ㆍ해체작업 및 미장ㆍ치장(견출) 작업발판용 케이지(cage)를 일체로 제작하여 사용하는 대형 거푸집을 말한다. 여기서 케이지는 갱폼에서 외부벽체 거푸집 부분을 제외한 부분으로 거푸집 설치ㆍ해체작업, 후속 미장, 치장(견출) 등 작업을 안전하게 수행하는데 필요한 작업발판, 안전난간 등으로 구성되어 갱폼 거푸집에 결합된 부분이며, 상부 케이지는 갱품 케이지의 4단 작업발판 중 거푸집 설치ㆍ해체작업용으로 사용되는 상부 2단 작업발판 구성 부분이고, 하부 케이지는 미장ㆍ치장(견출) 작업용으로 사용되는 하부 2단 작업발판 구성 부분을 말한다.(중략)

• Magazine of the Korea Concrete Institute
• /
• v.5 no.1
• /
• pp.175-181
• /
• 1993

콘크리트 구조체공사의 가장 큰 영향을 미치는 것은 거푸집공사이며, 구조체공사의 합리적 관리는 거푸집공사의 작업생산성에 관한 기초자료를 확보함으로써 가능하다. 본 연구에서는 거푸집공사의 과학적 관리기반을 구축하기 위하여, 구조체 기준층을 대상으로 작업측정을 하여 유로폼공법, 재래식 거푸집공법 등 주요공법의 생산성을 도출하였다. 또한, 거푸집공사의 주요 작업인 조립, 해체, 운반등 단위 공정의 소요작업 품을 산출함으로써, 작업개선을 위한 실용적인 자료를 제시하였다. 마지막으로 거푸집 면적이 생산성과 상관관계가 매우 높다는데 착안하여 소요작업품을 예측할 수 있는 상관관계식을 유도함으로써, 공정관리 및 기능공의 수급예측이 가능토록 하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.109-114
• /
• 2002

건설공사의 공종 중 거푸집공사는 전체공사기간의 대략 25％를 차지하고 있으며 공사비 비율은 일반적으로 전체공사비의 10～15％, 철근콘크리트공사비의 20～30％를 차지하고 있어 구조물의 안전성, 경제성 및 작업성과 품질관리에 중요한 역할을 한다. 또한 거푸집은 콘크리트가 양생되면 곧 해체되는 가설구조물로써 작업상에서 많은 위험요소를 포함하고 있으며 특히, 아파트공사의 경우 전체 재해발생의 17％로 가장 높은 비율을 차지하고 있다. 이와 같이 거푸집공사는 가장 우선적으로 관리하여야 할 위험공종이며 전체공기를 좌우하는 주공정으로서 이를 재해발생의 측면에서 제어하는 것이 안전관리에 있어서 가장 효율적이며 큰 효과를 나타낼 수 있는 것으로 생각된다.(중략)

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.161-162
• /
• 2023

본 연구는 거푸집 동바리 붕괴재해 예방대책 마련하기 위해 실시되었으며 구조검토, 재료문제, 설치문제, 작업방법 불량 등으로 기존의 가설작업이 서류적으로 형식상의 안전점검 및 구조검토서를 반영한 현장관리로 재해발생이 빈번하게 이루어지고 있는점을 착안해 현장대응 방법을 변경하여 관리하는데 목적을 둔다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.313-314
• /
• 2022

본 연구는 거푸집 동바리 붕괴재해 예방대책 마련하기 위해 실시되었으며 구조검토, 재료문제, 설치문제, 작업방법 불량 등으로 기존의 가설작업이 서류적으로 형식상의 안전점검 및 구조검토서를 반영한 현장관리로 재해발생이 빈번하게 이루어지고 있는점을 착안해 현장대응 방법을 변경하여 관리하는데 목적을 둔다.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.135-145
• /
• 2016

In Korea, a series of noise-reduced aluminum forms are being recently used in apartment housing construction. However, their complicated and time-consuming work processes, and the noise which is still generated due to the inherent property of aluminum when especially installing and dismantling them have been pointed out as a problem to be certainly solved for increasing their practical use in construction sites. The primary objectives of this study are proposing an optimal conceptual design of a newly designed noise-reduced aluminum form and verifying the technical feasibility by conducting a working mock-up drive experiment. Thus, conventional noise-reduced aluminum forms have been analyzed and three conceptual designs of a newly noise-reduced aluminum forms have been deducted. AHP has been applied to a survey data collected by interviewing field experts. A trade-off analysis results have shown that 'Noise-reduced System Aluminum Form with a Drop-down Floor Post and Adaptive Beam' the highest weights of safety(0.52), work convenience(0.54) and thus selected. The suggested conceptual design in this study improved problems of conventional system aluminum forms. It is also expected that the suggested design will be used as a reliable guideline for the actual development of an aluminum form that ensures noise-reduce, work convenience and labor safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.520-528
• /
• 2021

In this study, we attempted to derive major management factors related to the quality control of formwork and identified differences in the perceptions of construction engineers, construction managers, and field workers about the importance and performance of the derived factors. As a result of the study, 18 management factors related to the formwork were derived. Among the derived factors, the field workers placed importance on the factors that influence the detailed process of the formwork, while construction engineers placed importance on the factors related to the judgment of the progress and completion of the construction. The construction managers placed importance on the factors that affect the quality of the building frame. Based on the results of this study, it is expected that a plan to improve the quality of formwork that accepts the various opinions of each participant will be established.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.143-144
• /
• 2018

This study the workability of synthetic resin form was examined through field application. results there was no warping or bulging of the mold during concrete placement in the field application. Also, the concrete surface finish of synthetic resin form was better than that of euro-form.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.44-52
• /
• 2012

In the cost management of public construction projects, it is an important issue to develop an adequate cost data for estimating the predetermined amount by various methods. For a long time, a standard of estimation in korea is used as a basis for estimating the predetermined amount of public construction. However, they did not have a reasonable cost data based on a labor and equipment productivity analysis. For this reason, it is difficult to make a reasonable and efficient estimation of the costs, and this situation presents an urgent need for more accurate cost data to use in an early phase. This study analyzed the productivity of form work by the CYCLONE model, and presented the model on the number of optimal labor through sensitivity analysis. This CYCLONE model can be useful in analyzing productivity on the various sizes of form. Also, the regression model to estimate the daily output can be used in predicting the amount of labor. Considering the work duration in the regression model is expected to make the daily output estimation much more accurate.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.4-23
• /
• 2020

The purpose of this study was to explore the diversity of Korea's iron casting technology and to examine various casting methods. The study involved a literature review, analysis of artifacts, local investigation of production tools and technology, and scientific analysis of casting and cast materials. Bellows technology, or Bulmi technology, is a form of iron casting technology that uses bellows to melt cast iron before the molten iron is poured into a clay cast. This technology, handed down only in Jeju Island, relies on use of a clay cast instead of the sand cast that is more common in mainland Korea. Casting methods for cast iron pots can be broadly divided into two: sand mold casting and porcelain casting. The former uses a sand cast made from mixing seokbire (clay mixed with soft stones), sand and clay, while the latter uses a clay cast, formed by mixing clay with rice straw and reed. The five steps in the sand mold casting method for iron pot are cast making, filling, melting iron into molten iron, pouring the molten iron into the cast mold, and refining the final product. The six steps in the porcelain clay casting method are cast making, cast firing, spreading jilmeok, melting iron into molten iron, pouring the molten iron, and refining the final product. The two casting methods differ in terms of materials, cast firing, and spreading of jilmeok. This study provided insight into Korea's unique iron casting technology by examining the scientific principles behind the materials and tools used in each stage of iron pot casting: collecting and kneading mud, producing a cast, biscuit firing, hwajeokmosal (building sand on the heated cast) and spreading jilmeok, drying and biyaljil (spreading jilmeok evenly on the cast), hapjang (combining two half-sized casts to make one complete cast), producing a smelting furnace, roasting twice, smelting, pouring molten iron into a cast, and refining the final product. Scientific analysis of the final product and materials involved in porcelain clay casting showed that the main components were mud and sand (SiO₂, Al₂O₃, and Fe₂O₃). The release agent was found to be graphite, containing SiO₂, Al₂O₃, Fe₂O₃, and K₂O. The completed cast iron pot had the structure of white cast iron, comprised of cementite (Fe₃C) and pearlite (a layered structure of ferrite and cementite).