• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.183-196
• /
• 2006

Rock joint roughness obtained from the camera-type 3D scanner was classified into waviness and unevenness. The classification criteria were established in the previous study; digital filtering was used to distinguish one from another. The classified and original profiles were used to produce metal moulds. For accurate machining of the moulds, the WEDM(Wire-cut Electric Discharge Machining) was adopted. Specimens were cast using high strength gypsum, and joint shear tests were performed by varying normal stress from low value to high one. Roughness mobilization characteristics depending on the asperity scale and the applied normal stress were investigated. A new equation was proposed to predict shear strength of rock joint, which can consider the characteristics of roughness mobilization and roughness parameters. The roughness quantification composed of waviness and unevenness was found to be a useful method to predict the joint shear strength.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.4
• /
• pp.269-283
• /
• 2005

To figure out the cause of underestimating the roughness and shear strength of rock joints suggested by numerous researchers, we analyzed roughness mobilization characteristics, characteristics of roughness parameters, effects of sampling interval, and waviness for roughness parameters. It was found out that lack of understanding of the roughness mobilization characteristics, inappropriate applications of roughness parameters, and effect of aliasing provide a main reasons for those problems. Several practical alternatives for improving those problems were suggested. As far as digitizing methods are concerned, we can find that using a 3D scanner can give a relatively effective result. To avoid aliasing, sampling interval should be less than one-quarter of the minimum asperities. As for the quantification of roughness, it was analyzed that the roughness parameter should be classified into two components depending on the scale of roughness to apply the shear strength model. For classifying the roughness, a framework of the criterion was suggested based on the plastic flow concept for the asperity failure, and the basis for proposing a new alternative shear strength model was established.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1972_1973
• /
• 2009

한의학에서는 사상체질(태양인, 태음인, 소양인, 소음인) 구분을 위해 손등피부의 특징 중 하나인 거침/미끄러움을 이용하여 한의사의 주관적인 판단으로 사상체질을 구분해 왔다. 한의사의 손등피부 거칠기의 주관적인 촉진을 정량적 및 객관적으로 진단하기 위하여 피부마찰력진단기기를 개발하였다. 피부마찰력진단기기는 3축 로드셀 센서를 이용하여 한의사가 손등피부를 만지는 것과 같은 움직임으로 측정하며, 측정된 물리량 중 피부의 거침/미끄러움으로 계산되는 운동마찰계수 값을 이용하여 손등피부의 특성을 나타내었다. 본 연구에서는 피부마찰력 진단기기를 이용하여 객관적으로 손등피부의 특성을 측정해 보고 사상체질 진단의 객관적인 지표를 찾는 것을 목표로 한다.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.52-57
• /
• 1994

간 기능 진단에 초음파 영상이 가장 많이 이용되고 있다. 간이 나빠지면 간 표면의 입자가 굵어지고 이것이 영상에서는 밝기(intensity)와 입자의 거칠기(Coarseness)가 높아지는 등의 특성이 나타난다. 진단에 사용되는 인자는 표면의 거칠기와 밝기 외에도 소엽의 크기와 모양 그리고 문맥 혈관의 크기 등도 고려가 된다. 초음파상으로 이러한 크기와 모양의 구분은 그렇게 어렵지 않다. 그러나, 영상의 밝기와 거칠기의 미세한 변화는 구분하기가 어렵다. 본 연구는 밝기와 거칠기를 나타내는 변수를 제시하고 이를 기준으로 간 질환을 분류하였다. 간 조직의 거칠기에 따라 크게 정상(Normal), 만성 간염(Chronic), 간경변증(Cirrhosis) 세단계로 질환의 상태를 진단하고 영상의 밝기에 따라 다른 간질환과 지방간(fat liver)을 구별해 낸다. 본 분석에 이용된 임상 영상은 주로 만성 간염과 간경변증을 갖고 있는 환자들의 것과 약간의 지방간 영상들이다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.114-127
• /
• 2010

The purpose of this study is to find out cold and fresh air producing areas using climate-ecological functions in Changwon city, Gyeongsangnam-do, South Korea. The evaluation of climate-ecological functions were composed of the six factors: patch size with cold air generation and inflow functions, farmland and grassland ratio, mean slope degree, cross section types, mean slope length and roughness of bottom in valley. The analysis results of each evaluation factor in the study area were divided into 5 grades according to the capacity of cold air generation. The first-grade area with the highest factor values for cold air generation was take up 3.51% of the total study area, second grade was 13.48%, third grade was 31.65%, fourth grade was 27.28%, and fifth grade was 24.09%. According to the spatial distribution of cold air producing areas, the valleys around Mt. Bongnim, Changwon tunnel, and Anmin tunnel had higher evaluation grade. It will require the future research to establish the climate-ecological conservation areas and to construct the wind corridor based on the long-term microclimatic monitoring.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.293-308
• /
• 2012

The shear behavior at the particle/surface interface such as rock joint can determine the mechanical behavior of whole structure. Therefore, a fundamental understanding of the mechanisms governing its behavior and accurately estimation of the interface strength is essential. In this paper, PFC, a numerical analysis program of discrete element method was used to investigate the effects of the surface roughness on interface strength. The surface roughness was characterized by smooth, intermediate, and rough surface, respectively. In order to investigate the effects of particle shape and crushing on particle/surface interface behavior, one ball, clump, and cluster models were created and their results were compared. The shape of particle was characterized by circle, triangle, square, and rectangle, respectively. The results showed that as the surface roughness increases, interface strength and friction angle increase and the void ratio increases. The one ball model with smooth surface shows lower interface strength and friction angle than the clump model with irregular surface. In addition, a cluster model has less interface strength and friction angle than the clump model. The failure envelope of the cluster model shows non-linear characteristic. From these findings, it is verified that the surface roughness and particle shape effect on the particle/surface interface shear behavior.