• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.338-344
• /
• 2021

In this study, an actual test procedure was considered for the effective operation of a bulletproof test. The problems of the existing system were drawn in two ways. First, it is difficult to mount items of various shapes. Second, various test standards cannot be applied. To improve these problems, an automated and standardized mounting system was designed/applied to mount various items. The multi-purpose mount was compatible with the backing support for body armor testing. The sample holding frame was located inside and was designed to mount samples of various sizes and shapes through vertical movement and fixation without a separate detachment/attachment process. A comparison of the economics before and after the introduction of the item mounting system confirmed the effectiveness of the system by the increased number of daily tests and equipment utilization and reduced hourly cost.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.516-523
• /
• 2020

Since the aging of coastal structures have been increased, the researches about the reinforcements of the existing aged structures are needed. Especially, the existing armor units placed on rubble mound structures should satisfy the stability against the increased design wave conditions. However the researches about these design problems have not been performed. In this study, the hydraulic model tests to investigate the stability number about the additionally placed armor unit were conducted. The main armor unit is a Tetrapod. The test results showed that the stability number (Kd) for additionally placed armor units(Tetrapod) increased up to maximum 10% comparing with that for 2 layers tetrapod (Kd = 8) within these test conditions with the pattern placing for existing armor layers and the stable armor layer slope for the non overtopping condition.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.52-54
• /
• 2018

울산신항 북방파제(제3공구)축조공사에서는 국내 최초로 선박제조용 F/D(Floating Dock)선을 적용하여 케이슨 제작 및 거치공사를 실시하였으며, 공장형 슬립폼 제작장(IP-CCV)를 적용한 경우 보다 공기단축 및 원가절감의 효과가 있었다. F/D선 공법 순서는 작업부두에 F/D선 접안, 케이슨 제작, F/D선 진수장 이동, F/D선 및 케이슨 진수, 케이슨 예인 및 거치의 순서로 시행되었으며, 현재 턴키공사의 설계특화 내용으로 활용되어 시공안정성 향상 및 공기, 공사비 절감 방안으로 적용되고 있다. 향후 남북관계가 원만히 해결되어 동해안 항만개발이 가속화되면 국외특허공법(IP-CCV)에 의존없이 경쟁력있는 공법이라 판단된다.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.43-47
• /
• 2018

In recent years, bicycle craze has been blowing in Korea, and bicycle has become a means of transportation near. In addition, there is a lot of interest in the Internet of things, and recently there is a lot of interest in the Internet of things. However, despite the development of the bicycle market, the bicycle cradle does not have such a development, and it still has a drawback in that it requires a separate lock for the lock. In this regard, I would like to find some problems and solve them. In this paper, we have implemented a system that can control the location and use of the bicycle cradle in real time by communicating with the app and Arduino so that it can help the collection and retrieval of the bicycle which is the problem of the current bicycle cradle. n addition, we propose a method to establish a shared economic system based on Internet of things by providing shared services with acquaintances and others, and to improve user convenience by providing real - time services.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.213-218
• /
• 2000

Morphological characteristics of 16 collected safflower (Carthamus tinctorius L.)accessions were studied at Gyongbuk A.T.A. Uisong Medicinal Plant Experiment Station in 1998. As for plant height, 5 lines were tall(more than 131cm), which were mainly foreign safflower. Middle and small were 5 and 6 accessions, respectively. Number of branch per plant was 11∼13 in 2 accessions of domestic safflowers while foreign safflowers have more than 50 branches per plant. Leaf shapes were oblong(3 lines), lanceolate(10 lines) and broadly linear(3 lines). There were three types of leaf margin shape which were repand(7 lines), serrate(4 lines) and parted serrate(5 lines). Flower color was white(1 line), yellow(13 lines) and red orange(2 lines). As for flower head shape, 14 lines were conical and 2 lines were flattened. There were thorns on bract of flower head in 11 lines but in 5 lines there were not. Domestic safflower lines had seeds of conical shape. Contrastively, seed shapes of foreign saffower lines were oval.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.125-128
• /
• 2008

In this paper, a stand-type planar antenna of 900MHz RFID band is designed and fabricated. As the proposed antenna is stand-type use of air permittivity, Bandwidth used ground height at rectangle patch structure and coaxial feed line is widen. Also wideband width can solve problem that RFID tag attached to things happens frequency shift keying phenomenon by liquid, special metal, temperature, humidity etc. Bandwidth of fabricated antenna to VSWR less than 2 is satisfied 11.9% at $890MHz{\sim}1000MHz$. And proposed antenna is circular polarization antenna of operating characteristics that axial ratio is less than 2 and gain is 6dBi.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.183-185
• /
• 2015

반폐쇄해역에서는 해수교환이 어렵고 육상에서 유입부하와 적조 등의 영향을 강하게 받기 때문에 항상 수질과 저질이 악화되기 쉬운 환경에 처해 있어서 이의 개선을 위한 일환으로 해양식물(잘피)의 서식환경을 복원하여 해양정화에 기여하기 위한 친환경적 접근이 필요하다. 다양한 해상환경조건하에서 잘피의 서식은 변화므로 특히, 파랑의 극한 외력여건에 견디는 친환경 잘피 지지구조물 기술개발이 우선되어야 한다. 본 연구는 잘피장 조성의 기반기술로 해양식생 지지용 바이오 블록을 개발하고 특히, 관광지 및 해양클러스터 단지로 대외적으로 알려져 있는 영도해역에서 영도구가 야심차게 준비해오고 있는 해상낚시터 인근해역에 적용할 수 있는 바이오 블록의 현장시범거치를 통해 잘피 등 해양식생을 유도하기 기반을 마련하기 위한 기초연구로 대상구역에서의 파랑해석과 식생 조성 후에 파랑의 반응특성을 수치모델을 통해 분석하고자 하였다. 계산 결과는 대상지역에 적용할 사면 피복재로 바이오 블록의 규격을 결정하는데 반영될 것이며 후속 연구에서 실제블록의 제작과 현장거치를 수행하고자 한다.

• Journal of Chest Surgery
• /
• v.40 no.10
• /
• pp.691-695
• /
• 2007

Background: The introduction of central venous catheters in 1979 has aided the administration of chemotherapy to oncologic patients. We analyzed the clinical reviews and complications of totally implantable venous catheters in an effort to achieve optimal management. Material and Method: We retrospectively studied 100 cases with totally implantable venous catheter at our hospital and we report the results. Result: 100 totally implantable venous catheters were placed in the right subclavian vein in 74 cases (74%), the left subclavian vein in 21 cases, the right jugular vein in 3 cases, the left jugular vein in 1 case and the right femoral vein in 1 case. The immediate complications were 5 cases in malposition of the catheter and 5 cases of arterial puncture. The late complications were 1 case of subclavian vein thrombosis, which was treated with anticoagulation, and 2 cases of pinch-of syndrome. There were no other early or late complications. Conclusion: The low rate of complications in this study confirms the safety and convenience of using totally implantable venous catheter in patients undergoing prolonged chemotherapy. Yet because Infection, thrombosis, and catheter fracture are the most common long term complications of totally implantable venous catheters, early diagnosis and management of these problems can prevent severe complications.

• Journal of Korea Fishing Vessel Association
• /
• v.34
• /
• pp.78-82
• /
• 1988

• The Inventors News
• /
• no.26
• /
• pp.7-7
• /
• 2004

칼슨의 복사기 - 사카이의 생리대 - 샌드위치 백작의 샌드위치 - 전동식 원고지(서류) 거치대