• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.78-84
• /
• 2015

Depth estimation is often required for robot vision, 3D modeling, and motion control. Previous method is based on the focus measures which are calculated for a series of image by a single camera at different distance between and object. This method, however, has disadvantage of taking a long time for calculating the focus measure since the mask operation is performed for every pixel in the image. In this paper, we estimates the depth by using the focus measure of the boundary pixels located between the objects in order to minimize the depth estimate time. To detect the boundary of an object consisting of a straight line and a circle, we use the Hough transform and estimate the depth by using the focus measure. We performed various experiments for PCB images and obtained more effective depth estimation results than previous ones.

• Communications for Statistical Applications and Methods
• /
• v.17 no.4
• /
• pp.541-550
• /
• 2010

The $L_1$-regression estimator is susceptible to the leverage points, even though it is highly robust to the vertical outliers. This article is concerned with the improvement of robustness of the $L_1$-estimator. To improve its robustness, in terms of the breakdown point, we attempt to dampen the influence of the leverage points by means of reducing the weights corresponding to the leverage points. In addition the algorithm employs the linear scaling transformation technique, for higher computational efficiency with the large data sets, to solve the linear programming problem of $L_1$-estimation. Monte Carlo simulation results indicate that the proposed algorithm yields $L_1$-estimates which are robust to the leverage points as well as the vertical outliers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1387-1398
• /
• 2009

In the latest we will make a demand for the precision position estimation for the Mobile-station(MS)'s position. But, we have a lot of problems the position estimation method using the existing method. The Base-station(BS) measure a distance according to time delay waves to receive propagate from the MS and estimate the position using the existing circle equation with method to be selected BSs in close proximity the MS. It knows that happens a lot of error the estimated position and the true position. This paper propose that the method is selected round BSs to estimate for MS's position and estimated the angle using the second law of cosine. This paper demonstrate that using simulation the proposal method is a predominant method to compare with the existing method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.889-895
• /
• 2011

In recent days, some techniques to prevent from radar detection have been applied on aircraft system. RWR(Radar Warning Receiver) can be used for estimating the source location of the aircraft which emits radar pulse. Current existing method of localizing radar pulse emission source is using AOA(Angle Of Arrival) and most techniques are focused on finding exact AOA to find exact location. In this case, however, the exact AOA does not always result in finding exact source location while target aircraft is moving fast. In this paper, a localization method using the phase delay of the radar pulse's low frequency applies and so a scanning method for the interest area does in order to estimate exact source location by using phase delay.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.79-90
• /
• 2016

The study has purposed in evaluating experiences for achievable accuracy and precision of time series at 3-D coordinates. It has been estimated from the kinematic medium-range baseline processing of Continuously Operating Reference Stations (CORS) for the potential application of crustal displacement analysis during an earthquake event. To derive the absolute coordinates of local CORS, it is highly recommended to include some of oversea country references, since it should be compromised of an observation network of the medium-range baselines within the length range from tens of kilometers to about 1,000 kilometers. A data processing procedure has reflected the dynamics of target stations as the parameter estimation stages, which have been applied to a series of experimental analysis in this research at the end. From the analysis of results, we could be concluded in that the subcentimeters-level of positioning accuracy and precision can be achievable. Furthermore, the paper summarizes impacts of satellite ephemeris, data lengths and levels of initial coordinate constraint into the positioning performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.41-45
• /
• 2008

This paper deals with the estimation method on the initial pole position of a z-axis permanent magnet linear synchronous motor(PMLSM) without magnetic pole sensors such as Hall sensors. The proposed method takes account of the gravitational force at z-axis and also the load conditions. The algorithm consists of two steps. The first step is to approximately estimate the initial q-axis by monitoring the movements due to the test current at predefined different test q-axes. The second step is to estimate the real q-axis as accurately as possible by using the outputs corresponding to torques due to the test current at three different test q-axes in order to avoid the effect of load mass variations. Experimental results on the z-axis PMLSM show good estimation characteristics of the proposed method irrespective of load mass conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.460-465
• /
• 2021

In active sonar, time delay estimation is used to find the distance between the target and the sonar. Among the time delay estimation methods for active sonar, estimation in the frequency domain is widely used. When estimating in the frequency domain, the time delay can be thought of as a frequency estimator, so it can be used relatively easily. However, this method is prone to rapid increase in error due to noise. In this paper, we propose a new method which applies weighted dictionary and sparsity in order to reduce this error increase and we extend it to two receivers to propose an algorithm for estimating the time delay between two receivers. And the case of applying the proposed method and the case of not applying the proposed method including the conventional frequency domain algorithm and Generalized Cross Correlation-Phase transform (GCC-PHAT) in a white noise environment were compared with one another. And we show that the newly proposed method has a performance gain of about 15 dB to about 60 dB compared to other algorithms.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.212-218
• /
• 2013

In this paper, a linear motor piston amplitude estimator using phase lag filter has been implemented. In order to control the cooling capability of a refrigerator or an air conditioner in which liner compressors are applied, the piston speed should be controlled. The piston speed control can be obtained by adjusting the frequency or the stroke of linear motors. The dynamic performance of linear compressors depends on how accurately the stroke or the piston amplitude is estimated. A linear motor piston amplitude estimator using phase lag filter is proposed and the superior performance of our estimator is verified via some simulation studies.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.71-77
• /
• 2015

This paper implements an estimated closeness centrality ranking algorithm in large-scale workflow-supported social networks and performance analyzes of the algorithm. Existing algorithm has a time complexity problem which is increasing performance time by network size. This problem also causes ranking process in large-scale workflow-supported social networks. To solve such problems, this paper conducts comparison analysis on the existing algorithm and estimated results by applying estimated-driven RankCCWSSN(Rank Closeness Centrality Workflow-supported Social Network). The RankCCWSSN algorithm proved its time-efficiency in a procedure about 50% decrease.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.1-8
• /
• 2000

In this paper, positioning schemes based on AOA(Angle of Arrival), TOA(Time of Arrival), and TDOA(Time Difference of Arrival) measurements are reviewed and analyzed. In the case of using those schemes in microcell structure with severe multipath fading and shadowing conditions, the rapid and unpredictable variation of signal level makes it difficult to estimate the position and velocity of mobiles. Therefore, we propose a novel mobile tracking method based on the multicriteria decision making, in which uncertain parameters such as RSS(Received Signal Strength), the distance between mobile and base station, the moving direction, and the previous location are participated in the decision process using aggregation function in fuzzy set theory. Through a simulation, we analysis the impaction of the frequent change of direction and speed of mobiles.