• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.223-225
• /
• 2003

충북 보은군 회남면 조곡리와 분저리 일대에는 옥천누층군의 변성퇴적암에 속하는 문주리층, 창리층, 황강리층 및 국사봉층이 분포한다. 특히 국사봉층에는 모암의 주향연장을 따라 3～6매의 저품위 탄층이 단속적으로 배태되어 있어, 이를 대상으로 개발되었던 한도탄광, 부국탄광, 삼성제일탄광 및 보은제일탄광이 있다. 각각의 탄광주변에는 탄층을 따라 노두의 여러 곳에 갱도와 지표 채굴적이 산재한다. 노두에서 관찰되는 탄층은 수직 20 m 내외에서 10～300 cm의 폭을 보이나 대부분 100 cm 미만이다. (중략)

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1995.03a
• /
• pp.92-100
• /
• 1995

최근 지하 공간의 활용이 증대되는 추세에 이와 관련되어 지하 구조물의 시공전 또는 시공 중에 있어 시공 전략 수립, 장비 결정, 안정성 및 경제성 등을 위해 암반 내의 파쇄대나 균열대의 발달 및 분포에 대한 탐사는 필수적으로 선행되어야 한다. 이러한 탐사에는 분해능이 매우 높은 탐사 기술이 요구되며, 일반적으로 시추공이나 지하 갱도를 이용한 탄성파 탐사나 지오레이다(georadar) 탐사를 많이 사용하고, 자료해석을 위한 역산 기법으로는 지오토모그래피(geotomography)가 필수적인 기법으로 인식되고 있다. (중략)

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1994.03a
• /
• pp.89-101
• /
• 1994

기 발표된 보문에서, 정수두압이 작용하는 수갱측벽의 두께 산정과 수갱굴하의 특성을 간략하게 설명하였다. 이 두 부문에 대해서는 계속 다루어 나갈 예정이며, 본 회부터는 수갱굴하의 원론적인 문제도 다루기도 한다. 광산이나 탄광의 수갱은, 심부에 부존하는 광체 또는 탄층에서 채굴된 광물과, 갱도굴진에서 나온 버럭을 권양하고, 작업인원, 제반 자재, 압기동력원이 되는 전기, 급수 등을 공급하여 안전한 갱내작업을 유지하기 위한 통기회로를 형성시키고, 또한 갱내수를 배출하는 다목적의 대동맥과 같은 역할을 하는, 말하자면 광산의 가장 핵심체이다. (중략)

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.9-20
• /
• 2012

These days, mining industry prefers underground development for large mining because of exhaustive minning resources and large drafts and mining cavities thanks to extensive distribution of heavy excavation machines. In a mining design, to control collapse of cavities and secure stability, design of cavities and pillars are considered as very important. Therefore, this study obtained a prediction equation of blasting vibration through instrumentation for underground cavities. And we obtained theoretical shock vibration imposed on pillar through fragmentation analysis and measurement of flyrock distance. To examine the influence of pillar in underground mining blasting, we carried a finite element analysis and compared the result with prediction equation of blasting vibration, and shock vibration of flyrock when a impact was imposed on pillar and theoretical shock vibration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4087-4092
• /
• 2014

The gangway connection of the articulated high speed railway vehicles (HSRV) is a double wrinkled rubber component to seal the air of the corridor under a range of angular deviations between the carriage end parts. From the results of non-linear structural analysis, one of the severe loading conditions for the connection is mixed mode (rolling+yawing) angular displacements while passing through the small-radius curved siding track of the HSRV depot. In this study, to ensure the safety enhancement of the component, the optimal design for the cross section of that was performed using the Solid Isotropic Material with Penalization (SIMP) method. Nonlinear finite element analysis confirmed that the decreases in the maximum principal strain of the optimized design under rolling and mixed modes are 68% and 39%, respectively, compared to the initial design.

• Tunnel and Underground Space
• /
• v.24 no.6
• /
• pp.464-472
• /
• 2014

In large-opening room-and-pillar mining sites, particularly without the devices for the ventilation control, the airflow pattern created by the local fan operation is too complicated to quantify and also shows low ventilation efficiency. This study aims at performing a series of CFD analysis for the so-called venturi effects of the local fans; the effects of increasing airflow rate along the axis downstream of fan resulting from increased kinetic energy and subsequently decreased static pressure in the downstream. Effects of the fan type and installation height are compared. 1 vane-axial fan and 2 propeller fans are analyzed for their venturi effects, while the vane-axial fan was installed at the height of 1.0, 1.5 and 2.0m for comparison. The results can be applied to improve the economy and efficiency of local fans for securing better air quality and work environment management.

• Clean Technology
• /
• v.22 no.3
• /
• pp.168-174
• /
• 2016

The working environment is deteriorated due to a rise in temperature of a coal mine caused by increase of its depth and carriage tunnels. To improve the environment, the temperature distribution resulted by using the fan type ventilation system aiming for the temperature drop is calculated by using a fluid dynamic analysis program. The analysis shows that A coal mine needs 6,152 m³ min^-1 for in-flow ventilation rate but the total input air flowrate is 4,710 m³ min^-1, 1,442 m³ min^-1 of in-flow ventilation rate shortage and the temperature between the carriage tunnel openings and the workings with exhausting ventilation system type is 2~3 ℃ less than that with blowing ventilation system type. The exhausting ventilation system type would be more effective than blowing ventilation system when the distance between the carriage tunnel openings and the workings is relatively far.

• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.1-10
• /
• 2010

In blasting for lighting, fatigue behaviors of pillars such as destruction and deformation may occur due to blasting vibration and flyrock, which may cause collapses of cavities. This study aims to identify dynamic behavior of pillars to maintain efficient safety of cavities in large drafts. when they collide with flyrocks under blasting for the excavation. For the purpose, we compared ground vibration around pillar when flyrock collided with the pillar and that when explosive blast happened for the excavation. we conducted fragmentation analysis of the flyrock and compared impact vibration obtained from empirical equation with ground vibration obtained from regression analysis of real vibration data. also we compared those with results analyzed from numerical analysis.

• Tunnel and Underground Space
• /
• v.14 no.6 s.53
• /
• pp.411-422
• /
• 2004

Sinkhole subsidence occurs over abandoned mine workings and can be detrimental to human lives, damage to properties and other surface structures. In this study, simulation of sinkhole development process is performed using special finite element procedure. Especially, creation of mine voids due to roof falls and generation of goaf from broken rocks are simulated using active-passive-active finite elements. An active or solid element can be made passive or void once the tensile failure criterion is satisfied in the specified sinkhole formation zone. Upon completion of sinkhole development process, these passive elements in again be made active to simulate goal region. Several finite element models are analyzed to evaluate the relationships between sinkhole formation with width of gallery. depth of mine, roof condition and bulking factor of roof rocks. This study demonstrates that the concept of passive elements in numerical analysis can be used effectively for analyzing sinkhole formation or roof fall phenomenon in general.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.54-62
• /
• 2010

In order to obtain the basic data for recycling of coal mine tailings, the characteristics of coal mine tailings, the formation of AMD from the tailings and the leaching of heavy metal from the tailings were studied. The samples were characterized in terms of chemical composition, mineral composition and content of heavy metal of the tailings were investigated. The effects of time, temperature, content of pyrite, sulfide minerals on the formation of AMD were also investigated. For the leaching tests, the KS method, TCLP method and column test were used. From the investigated data, we can see that the coal mine tailings can be used as aggregate for filling used gallery. We can also see that the formation of AMD from coal mine tailings can be prevented by mixing 4% or more limestone with it.