• Journal of the Korean Orthopaedic Association
• /
• v.55 no.5
• /
• pp.418-425
• /
• 2020

Purpose: The purpose of this study was to introduce the ultrasound-guided transmeniscal injection in medial compartment knee osteoarthritis and analyze the clinical outcomes. Materials and Methods: The electronic medical records of 36 patients with medial compartment knee osteoarthritis who were treated with an ultrasound-guided transmeniscal injection from March 2019 to July 2019 were accessed for this retrospective review. Using an ultrasound guided spinal needle, the patients received an intra-articular steroid injection at the medial compartment of the knee. A physical examination was conducted at the initial visit (pre-injection), and at one week, four weeks, and eight weeks after the injection. The numeric pain rating scale (NRS), Lequesne index, and Western Ontario and McMaster Universities Osteoarthritis (WOMAC) score were measured at each visit and analyzed over time. The percentage change of the patients who revealed substantial improvement was analyzed. The NRS, Lequesne index, and percentage of patients, who revealed substantial improvement over time classified by osteoarthritis grade, were analyzed. Results: The NRS and Lequesne index decreased at one week, four weeks, and eight weeks after the injection compared to the initial baseline, and the pain-relief effect continued without change until eight weeks. The percentage of patients who showed substantial improvement at one, four, and eight weeks was 50.0%, 47.2%, and 52.8%, respectively. The WOMAC scores decreased at one, four, and eight weeks compared to the initial baseline, and the decrease was continued without any difference until eight weeks. The percentage of patients with osteoarthritis stage 1 or 2 who revealed more than substantial improvement was significantly higher at one, four, and eight weeks than those with osteoarthritis stages 3 or 4 (p<0.05). Conclusion: In patients with medial compartment knee osteoarthritis, the pain reduction and functional improvement persisted for at least eight weeks after the ultrasound-guided transmeniscal injection at the medial compartment. In particular, patients with medial compartment osteoarthritis stage 1 or 2 showed more effective pain reduction.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.145-158
• /
• 2023

Constructed wetlands (CWs) are effective technologies for urban wastewater management, utilizing natural physico-chemical and biological processes to remove pollutants. This study employed a bibliometric analysis approach to investigate the progress and future research trends in the field of CWs. A comprehensive review of 100 most-recently published and open-access articles was performed to analyze the performance of CWs in treating wastewater. Spain, China, Italy, and the United States were among the most productive countries in terms of the number of published papers. The most frequently used keywords in publications include water quality (n=19), phytoremediation (n=13), stormwater (n=11), and phosphorus (n=11), suggesting that the efficiency of CWs in improving water quality and removal of nutrients were widely investigated. Among the different types of CWs reviewed, hybrid CWs exhibited the highest removal efficiencies for BOD (88.67%) and TSS (95.67%), whereas VSSF, and HSSF systems also showed high TSS removal efficiencies (83.25%, and 78.83% respectively). VSSF wetland displayed the highest COD removal efficiency (71.82%). Generally, physical processes (e.g., sedimentation, filtration, adsorption) and biological mechanisms (i.e., biodegradation) contributed to the high removal efficiency of TSS, BOD, and COD in CW systems. The hybrid CW system demonstrated highest TN removal efficiency (60.78%) by integrating multiple treatment processes, including aerobic and anaerobic conditions, various vegetation types, and different media configurations, which enhanced microbial activity and allowed for comprehensive nitrogen compound removal. The FWS system showed the highest TP removal efficiency (54.50%) due to combined process of settling sediment-bound phosphorus and plant uptake. Phragmites, Cyperus, Iris, and Typha were commonly used in CWs due to their superior phytoremediation capabilities. The study emphasized the potential of CWs as sustainable alternatives for wastewater management, particularly in urban areas.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.119-127
• /
• 2016

The current disinfection method of vehicles being applied in South Korea has various shortcomings. So, the epidemic has generated continuously at livestock farms. It is very important to develop an effective disinfection system for reduction of the epidemic. And various basic data is required for this development. Therefore, this study was performed to identify the nozzle type and proper discharge pressure of sprayers. The experiment was conducted from January 10, 2012 until February 28, 2012. All the performance measurement experiments were repeated five times. The subjects of experiment were the A, B and C company's products. The sprayed capacity, angle of spray and the covering area ratio were measured for each product. As a result, the sprayed capacity, angle of spray and the covering area ratio were increased as the discharge pressure of the sprayer was increased. In conclusion, the conical shaped of the nozzle is considered more appropriate than V-shaped, and the proper discharge pressure is expected to be at least 20kg/㎠.

• Korea Science and Art Forum
• /
• v.29
• /
• pp.319-331
• /
• 2017

South Korea has entered the age of aging society since the elderly population over 65 reached 13.1% in 2015. This increase rate is the fastest in the OECD members. as a part of the precaution, the Korean government has enforced the long term care insurance from July 2008 and the increase of related nursing homes until 2015 was 220.2% which is rapid and quantitative. It was natural that quantitative expansion leads to qualitative improvement. With regard to service environment conditions, color environment draws attention as one of the most effective measures. color environment supports nursing home's spatial functions and the aged class is subject to the research as the potential customers. This study aims to understand color environment, conduct surveys for color preference and attitude toward color environment, and suggest directions for color environment plan. The ultimate goal is to improve the quality of Korean nursing home environment. It studied definition, state, color environment and space functions of nursing homes as well as the preceding researches. With 100 people over 60s in Busan and Gyeongnam area (52 male and 48 female), the survey examined attitudes for color environment and color preference by space functions in nursing home. The research method is as follows. First, as a result of the consciousness survey on color environment in elderly nursing home, it considers service (37%), medical service (20%), and location (19%) heavily in order. color environment plan is not recognized significantly. However, the need of indoor color plan in the elderly nursing homes has "agree (32%) and "strongly agree (25%), which suggests that color introduction is required to the nursing homes. Second, the indoor coloration for the elderly nursing homes has various color preferences. The color preference order for bedroom was R, P, and G but this order changes in nursing space (program room) to G, R, and Y. The communal space such as lobby prefers R, G and Y in order. R color was preferred in general.

• Journal of agricultural medicine and community health
• /
• v.48 no.2
• /
• pp.132-143
• /
• 2023

Objectives: We aimed to describe the reporting patterns of 6 notifiable surveillance diseases in the Republic of Korea, including water- and foodborne infections, from 2012 to 2021. Methods: For the 12,296 cases that met the reporting criteria, we calculated the number of reported cases, including the number of cases confirmed by lab tests or suspected by a physician, the number of cases with delayed reporting and their average days of delay, and the median days required to report the confirmatory test results. Results: The overall number of reported cases consistently increased over the ten years, with a significant rise in the reported cases of typhoid fever, paratyphoid fever, and EHEC. Ninety-five percent of all reported cases were timely reported within one day of diagnosis. Vibrio vulnificus had the highest rate of delayed reporting (6.8% delayed over 1 day, 3.0% delayed over 3 days), while cholera had the lowest rate (1.9% delayed over 1 day, 0.1% delayed over 3 days). The average days of delayed reporting was 6.1 days: the highest for paratyphoid fever (10.8 days) and the lowest for cholera (2.7 days). For typhoid fever and paratyphoid fever, there has been an increase in the proportion of cases with negative test results. For vibrio vulnificus, there has been an increase in the proportion of cases with confirmed positive test results. As for EHEC, there has been a recent increase in cases with no confirmatory tests. Conclusions: Reported cases of water- and foodborne infectious diseases increased, indicating improved surveillance system completeness. However, for paratyphoid fever, improvements are needed in terms of timely notification by healthcare facilities and timely reporting of confirmatory test results.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.426-438
• /
• 2023

Lithium-sulfur batteries, recently attracting attention as next-generation batteries, have high energy density but are limited in application due to sulfur's insulating properties, shuttle phenomenon, and volume expansion. This study used an economical and simple vacuum filtration method to prepare a freestanding electrode without a binder and collector. Carbon nanotubes (CNTs) are used to improve the electrical conductivity of sulfur, where CNT also acts as both collector and conductor. In addition, metal oxides (MO_x, M=Ni, Mg), which are easy to adsorb lithium polysulfide, are added to the CNT/S electrode to suppress the shuttle reaction in lithium-sulfur batteries, which is a result of suppressing the loss of active sulfur material due to the excellent adsorption of lithium polysulfide by metal oxides. The MO_x@CNT/S electrode exhibited higher capacity characteristics and cycle stability than the CNT/S electrode without metal oxides. Among the MO_x@CNT/S electrodes, the NiO@CNT/S electrode displayed a high discharge capacity of 780 mAh g^-1 at 1 C and an extreme capacity decrease to 134 mAh g^-1 after 200 cycles. Although the MgO@CNT/S electrode exhibited a low discharge rate of 544 mAh g^-1 in the initial cycle, it showed good cycle stability with 90% of capacity retention up to 200 cycles. Further, to achieve high capacity and cycle stability, the Ni_0.7Mg_0.3O@CNT/S electrode, mixed with Ni:Mg in the ratio of 0.7:0.3, manifested an initial discharge rate of 755 mAh g^-1 (1 C) and a capacity retention rate of more than 90% after 200 cycles. Therefore, applying binary metal oxides to CNT/S provides a freestanding electrode for developing economical and high-performance Li-S batteries, effectively improving lithium polysulfide's high capacity characteristics and dissolution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.6-7
• /
• 2021

Vegetation development in rivers is one of the important issues not only in academic fields such as geomorphology, ecology, hydraulics, etc., but also in river management practices. The problem of river vegetation is directly connected to the harmony of conflicting values of flood management and ecosystem conservation. In Korea, since the 2000s, the issue of river vegetation and land formation has been continuously raised under various conditions, such as the regulating rivers downstream of the dams, the small eutrophicated tributary rivers, and the floodplain sites for the four major river projects. In this background, this study proposes a method for classifying the distribution of vegetation in rivers based on remote sensing data, and presents the results of applying this to the Naeseong Stream. The Naeseong Stream is a representative example of the river landscape that has changed due to vegetation development from 2014 to the latest. The remote sensing data used in the study are images of Sentinel 1 and 2 satellites, which is operated by the European Aerospace Administration (ESA), and provided by Google Earth Engine. For the ground truth, manually classified dataset on the surface of the Naeseong Stream in 2016 were used, where the area is divided into eight types including water, sand and herbaceous and woody vegetation. The classification method used a random forest classification technique, one of the machine learning algorithms. 1,000 samples were extracted from 10 pre-selected polygon regions, each half of them were used as training and verification data. The accuracy based on the verification data was found to be 82~85%. The model established through training was also applied to images from 2016 to 2020, and the process of changes in vegetation zones according to the year was presented. The technical limitations and improvement measures of this paper were considered. By providing quantitative information of the vegetation distribution, this technique is expected to be useful in practical management of vegetation such as thinning and rejuvenation of river vegetation as well as technical fields such as flood level calculation and flow-vegetation coupled modeling in rivers.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.145-154
• /
• 2019

The purpose of this study is to investigate the performance, learning motivation and satisfaction of the students who take the university 's Lifelong Education Program. The research method was interviewed. The results are as follows. In terms of operations; First, the awareness of the kindness of employees of the college lifelong education institute needs to be strengthened at the beginning of the school year. Second, in the operation of the College Lifelong Education Center, the support such as the parking fee should be extended to the students. Third, lifelong education facilities should be supplemented. In terms of participation motivation; First, it can be seen that there are the most learners who want to do complementary learning. Most of them are people who look back on their lives and prepare for their future directions. Second, as the life span of human beings became longer, the economic preparation for life became necessary. Thus, all learning tends to be perceived as a preparation for economic income. Third, most people who participate in lifelong education are very interested in health. Therefore, it is necessary to increase the motivation for participation by expanding health related programs. In terms of satisfaction; First, it depends on the purpose of the individual. Satisfaction was high for those who aimed at hobbies and relationships, and satisfaction for those who aimed for economic activities was low. Second, it is also necessary to consider the instructor 's instructional process. In other words, lifelong learners tend to be adults, so little complaints are not revealed. Therefore, I would like to ask the lecturers to advance the education for the class. The implications for the improvement direction of the lifelong education center are as follows; First, we need to drastically reduce the number of programs overlapping with other universities and conduct research to develop new programs. In order to do this, it is necessary to continuously carry out a survey of demanders' needs. Second, it is necessary to find the appropriate place for program operation considering the movement distance of learners. It should be avoided that the program should be operated with the existing university facilities. Third, universities' lifelong education should go to education that includes college students.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.398-403
• /
• 2023

Process-based K-cabbage model is based on physiological processes such as photosynthesis and phenology, making it possible to predict crop growth under different climate conditions that have never been experienced before. Current first-stage process-based models can be used to assess climate impact through yield prediction based on climate change scenarios, but no comparison has been performed between big data obtained from the main production area and model prediction so far. The aim of this study was to find out the direction of model improvement when using the current model for yield prediction. For this purpose, model performance evaluation was conducted based on data collected from farmers growing 'Chungwang' cabbage in Taebaek and Samcheok, the main producing areas of Chinese cabbage in highland region. The farms surveyed in this study had different cultivation methods in terms of planting date and soil water and nutrient management. The results showed that the potential biomass estimated using the K-cabbage model exceeded the observed values in all cases. Although predictions and observations at the time of harvest did not show a complete positive correlation due to limitations caused by the use of fresh weight in the model evaluation process (R²=0.74, RMSE=866.4), when fitting the model based on the values 2 weeks before harvest, the growth suitability index was different for each farm. These results are suggested to be due to differences in soil properties and management practices between farms. Therefore, to predict attainable yields taking into account differences in soil and management practices between farms, it is necessary to integrate dynamic soil nutrient and moisture modules into crop models, rather than using arbitrary growth suitability indices in current K-cabbage model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.257-267
• /
• 2023

Purpose. The purpose of the study was to fabricate a prototype robotic simulator for dental education, to test whether it could simulate mandibular movements, and to assess the possibility of the stimulator responding to stimuli during dental practice. Materials and methods. A virtual simulator model was developed based on segmentation of the hard tissues using cone-beam computed tomography (CBCT) data. The simulator frame was 3D printed using polylactic acid (PLA) material, and dentiforms and silicone face skin were also inserted. Servo actuators were used to control the movements of the simulator, and the simulator's response to dental stimuli was created by pressure and water level sensors. A water level test was performed to determine the specific threshold of the water level sensor. The mandibular movements and mandibular range of motion of the simulator were tested through computer simulation and the actual model. Results. The prototype robotic simulator consisted of an operational unit, an upper body with an electric device, a head with a temporomandibular joint (TMJ) and dentiforms. The TMJ of the simulator was capable of driving two degrees of freedom, implementing rotational and translational movements. In the water level test, the specific threshold of the water level sensor was 10.35 ml. The mandibular range of motion of the simulator was 50 mm in both computer simulation and the actual model. Conclusion. Although further advancements are still required to improve its efficiency and stability, the upper-body prototype simulator has the potential to be useful in dental practice education.