• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.13.2-14
• /
• 1982

Otitis media with effusion, described first by Politzer (1867), is closely related with the function of auditory tube, but its etiology and pathogenesis are not clearly defined yet. There are many theories about its pathogenesis including hydrops ex vacuo theory which was most reliable nowadays. In this paper, using cats in experimental animals, hydrops ex vacuo theory was proved and cytological study of the effusion and light microscopic observation of the middle ear mucosa in otitis media with effusion were done. The results were as follows: 1) The effusion was found in all experimental groups after eighteen hours of the auditory tube obstruction. 2) In the cytological study of effusion by smear technic, Polymorpholeukocytes were dominant in earlier days but monoculear cells were soon increased and no eosinophils were found. 3) In the culture of the effusion, no bacteria was cultured. 4) By opeating microscope, hypertrophy of the middle ear mucosa observed especially in the fourteen days after auditory tube obstruction and effusion was most remarkable in the fourteen days, also. 5) By light microscopy, there were epithelial hyperplasia, proliferation of goblet cells, capillaries and infiltration of inflammatory cells which showed same distribution as smear technic.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.517-528
• /
• 2007

Domestic or international existing researches regarding rail damage factors are focused on laying, vehicle conditions, driving speed and driving habits and overlook characteristics of track structure (elasticity, maintenance etc). Also in ballast track, as there is no special lateral spring stiffness of track also called as ballast lateral resistance in concrete track, generally, existing study shows concrete track has 2 time shorter life cycle for rail replacement than ballast track due to abrasion. As a result of domestic concrete track design and operation performance review, concrete track elasticity is lower than track elasticity of ballast track resulting higher damage on rail and tracks. Generally, concrete track has advantage in track elasticity adjustment than ballast track and in case of Europe, in concrete track design, it is recommended to have same or higher performance range of vertical elastic stiffness of ballast track but domestically or internationally review on lateral spring stiffness of track is very minimal. Therefore, through analysis of service line track on site measurement and analysis on performance of maintenance, in this research, dynamic characteristic behaviors of commonly used ballast and concrete track are studied to infer elasticity of service line track and experimentally prove effects of track lateral spring stiffness that influence curved rail damage as well as correlation between track elasticity by track system and rail damage to propose importance of appropriate elastic stiffness level for concrete and ballast track.

• Journal of Chest Surgery
• /
• v.31 no.7
• /
• pp.679-683
• /
• 1998

From June 1995 to May 1997, we have implanted 52 Sorin Bicarbon mechanical valves in 41 patients. They were 16 men and 25 women, and their mean age was 47.4${\pm}$14.8(range; 18∼74 y.o.). 35(27 mm∼31 mm) were in mitral position, 15(19 mm∼25 mm) in aortic position, and 2(31 mm) in tricuspid position. 3 CABGs and a tumor excision were taken concomittantly. 35 patients were primary operation, and 6 were re-do operations. By intraoperative transesophageal doppler echocardiography, transvalvular peak/mean pressure gradient was 6.1${\pm}$2.7/2.4${\pm}$1.4 mmHg in mitral position and 27.6/10.7 mmHg in aortic position. The effective valve opening area in mitral position was 3.2${\pm}$0.6 cm2. Follow-up was total 508.6 patient-months, and mean follw-up was 12.7${\pm}$9.2 months. NYHA class was improved from 2.6${\pm}$0.6 to 1.2${\pm}$0.3 in average postoperatively. During that period, there was no operative death. 2 late non-valve related deaths were occurred. One was died of COPD, and the other was possible acute myocardial infarction. Among 7 postoperative complications, one valve related complication(minimal paravalvular leakage) was noticed. In conclusion, Sorin Bicarbon mechanical valve is believed one of the safe choice in clinical settings. It showed excellent hemodynamic and mechanical functions, and very low postoperative valve related complications in short term clinical experience.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.711-719
• /
• 2011

A study of miniaturization of an L-band orthomode transducer(OMT) for field experiments of radar backscatter is presented in this paper. The proposed OMT is not required the additional waveguide taper structures to connect with a standard adaptor by the newly designed junction structure which bases on a waveguide taper. Total length of the OMT for L-band is about 1.2 ${\lambda}_o$(310 mm) and it's a size of 60 % of the existing OMTs. And, to increase the matching and isolation performances of each polarization, two conducting posts are inserted. The bandwidth of 420 MHz and the isolation level of about 40 dB are measured in the operating frequency. The L-band scatterometer consisting of the manufactured OMT, a horn-antenna and network analyzer(Agilent 8753E) was used STCT and 2DTST to analysis the measurement accuracy of radar backscatter. The full-polarimetric RCSs of test-target, 55 cm trihedral corner reflector, measured by the calibrated scatterometer have errors of -0.2 dB and 0.25 dB for vv-/hh-polarization, respectively. The effective isolation level is about 35.8 dB in the operating frequency. Then, the horn-antenna used to measure has the length of 300 mm, the aperture size of $450{\times}450\;mm^2$, and HPBWs of $29.5^{\circ}$ and $36.5^{\circ}$ on the principle E-/H-planes.

• Clinical and Experimental Pediatrics
• /
• v.50 no.4
• /
• pp.363-368
• /
• 2007

Purpose : It has been reported that deep neck abscesses are recently increasing again. We analyzed pediatric cases with deep neck abscesses during the last several years to contribute to the treatment of the disease. Methods : The clinical data of 30 children under 16 years of age with deep neck abscess from February 2001 to July 2006 were analysed retrospectively. Results : The mean age was 9 years (2-16 years), and the male/female ratio was 19/11. Abscesses in the peritonsillar space were most common (57%), followed by the retropharyngeal (30%) and parapharyngeal (13%) spaces. Upper respiratory infection in 10 cases (33%), dental infection in four case (14%), cervical lymphadenitis in three case (10%) and sinusitis in two case (6%) contributed to the development of deep neck infections. The frequent symptoms were fever in 16 case (53%), sore throat in 15 case (50%), poor oral intake in 10 (33%), odynophagia in eight (27%), and neck pain in eight (27%). Unilateral tonsillar hypertrophy and displacement in 15 case (50%) were most common. Neck mass in 13 patients (43%), neck stiffness in three (10%) and trismus in three (10%) were also found. Bacteria were isolated in 8 among 10 pus cultures; Streptococcus species 7 and Micrococcus luteus 1. All of those bacteria except Micrococcus luteus were sensitive to penicillin G. Surgical intervention was applied to 12 cases (40%), and the remaining 18 patients (60%) were treated with antibiotics only. There were no differences between the two groups in the duration of admission and antibiotic treatment. No complicated cases were observed. Conclusion : Peritonsillar abscesses were most frequent. Upper respiratory infection was the most common predisposing factor, followed by dental infection and sinusitis. Symptoms of respiratory tract obstruction were not found. The most common pathogens were Streptococcus species. Deep neck abscesses in children, if diagnosed at the early stage, possibly can be treated by antibiotics only, without surgical intervention.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.297-297
• /
• 2009

최근 유기농산물에 대한 관심과 요구가 급증하면서 소비자들은 고품질 유기농산물을 선호하고 있어 국내 대부분 유기농가들은 무처리 일반종자를 이용하고 있는 실정이다. 앞으로 국제 기준에 부합하는 채소류 유기재배를 위해서는 유기종자의 이용이 필수적이므로 유기종자 채종체계 확립이 필요한 실정이다. 따라서 본 연구에서는 당근 종자(재래종 heimloom)를 사용하여 유기종자의 채종체계를 확립하고자 하였다. 일반적으로 당근종자 생산은 적어도 2년을 요구한다. Seed to seed 방법과 Root to seed 방법이 이용되고 있는데 본 연구에서는 Root to seed 방법을 사용하였다. Root to seed 방법은 6월에 당근종자를 파종하여 가을에 뿌리를 수확하여 지상부를 5cm 정도 남기고 정지하여 일시 저온저장 하였다가 이듬해 뿌리를 이식하여 새순에서 추대시켜 종자를 수확하는 방법으로 종자 생산성이 높아 종자회사에서 많이 사용하고 있다. 본 연구에서도 Root to seed 방법으로 채종 시험하였다. 2008년도에 파종 및 수확한 뿌리를 저온저장고에 일시 저장 후 1차 이식은 2008년 11월 하순에 노지포장에서 실시하고 이때 월동 중 동해를 막기 위하여 보온덮개로 멀칭 처리하였다. 이듬해 3월 중순에 주간거리 75${\times}$40cm 간격으로 솎음하여 처리당 10주씩 배치하였다. 이식후 뿌리에서 새순 1대를 유도하였고 추대 및 개화 6주후부터 종자가 갈색으로 변하기 시작할 때 채종을 시작하였다. 수확부위는 1차 측지 중 1번째 화지를 대상으로 하였고 화경절단은 화총으로부터 20cm 정도 남겨서 잘랐고 실내에서 1개월 이상 충분히 후숙시킨 후 종자를 정선하여 종자생산성을 조사하였다. 결실율과 발아율 조사는 채종된 종자를 이용하여 종자 충실도와 발아력을 조사하였다. 각 품종별 추대율은 15번 품종과 16번, 24번 품종이 5% 미만으로 매우 부진하였고 그밖에 추대된 묘의 생육 및 발육상은 매우 양호하여 개화에는 커다란 문제가 없었다. 종자 결실율은 23번 품종을 제외한 모든 품종에서 높았고 각 품종별 화총구조를 고려해 볼 때 주간 화총, 1차측지, 2차측지 순으로 결실율이 떨어졌다. 각 품종의 천립중은 1, 11, 12, 14, 20번 품종이 2.02g 이상으로 대립종으로 판단되며 각 품종별 화총의 크기는 비슷하여 대립종은 각 화총당 종자수가 적은 것으로 나타났다. 대분분의 대립종은 만생종으로 생육기간이 소립종 보다 10-20일상 길며 종자 성숙기간도 장기간 소요되며 특히 장마기간을 넘겨야 할 경우에는 비가림 시설 채종재배가 필수적인 것으로 나타났다. 발아율은 10, 11, 14, 18, 19, 26번 품종이 80% 이상으로 가장 높았고 다른 품종에서는 다소 떨어져 품종별 차이가 많았다. 종자 생산성은 장근종과 단근종간에 약간의 차이가 있지만 주간 화총을 포함하여 1차 측지 4-5개에서 채종하는 것이 가장 효율적인 것으로 사료된다. 또한 당근의 개화 기간을 보면 1화륜은 8~10일, 1개체는 40~50일, 채종포장에서는 1화륜에서 측지 6개구까지 채종은 60~70일 소요되어 미숙종자와 과숙종자가 혼재되어 적정 수확시기를 결정하기가 매우 어려운 점이 발생하였다. 본 연구 결과에서 생육특성, 수량성, 품질특성, 종자 생산성, 발아율을 고려해 볼 때 1, 7, 8, 9, 10, 14, 19, 26번 품종이 유기농 재배 및 유기채종에 적합한 것으로 사료되었다.

• Journal of Oral Medicine and Pain
• /
• v.33 no.4
• /
• pp.375-382
• /
• 2008

This study was a preliminary study to establish diagnostic criterias and treatment for Orofacial Movement Disorders. The 33 Orofacial Movement Disorder patients who were visited in the department of Oral Medicine from September, 2007 to December, 2007 were selected for this study. We analyzed the age, sex, systemic diseases, the diagnosis and the cause of the patients' chief complaints, the self-consciousness and the types of orofacial movements. The obtained results were as follows : 1. Female were predominant in orofacial movement disorders(81.82% vs 18.18%) and mean age was 78.78(56 to 87) years. 2. They almost had systemic diseases(81.82%). Hypertenstion was the most common disease(22.41%) and diabetes mellitus(17.24%), depression(8.62%), gastritis(8.62%) in turns. 3. In clinical manifestation, temporomandibular disorder was the most frequently complained symptom(33.33%), and soft tissue disease(21.57%), burning mouth syndrome(17.65%), orofacial movement itself(15.69%), diffuse orofacial pain(6명, 11.76%) in turns. 4. Most orofacial movement disorders are idiopathic(72.73%), and related to prosthetic treatment(24.24%), related to antidepressant medication(3.03%) in turns. 5. The jaw-closing type was the most common type of orofacial movement disorders, and lateral type(33.33%), jaw-opening types(16.67%) in turns. 6. There were more patients who did not conscious of their orofacial movements than those who did.(54.55% vs 45.45%). In conclusion, dentists must be consider the orofacial movement disorders in patients who have orofacial pain. Also, dentists should obtain a proper history and perform a clinical examination to avoid misdiagnosis and inappropriate, irreversible treatment.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.275-283
• /
• 2012

Steel Plate for Rebar Connection was recently developed to splice rebars in delayed slab-wall joints in high-rise building, slurry wall-slab joints, temporary openings, etc. It consists of several couplers and a thin steel plate with shear key. Cyclic loading tests on slab-wall joints were conducted to verify structural behavior of the joints having Steel Plate for Rebar Connection. For comparison, joints with Rebend Connection and without splices were also tested. The joints with Steel Plate for Rebar Connection showed typical flexural behavior in the sequence of tension re-bar yielding, sufficient flexural deformation, crushing of compression concrete, and compression rebar buckling. However, the joints with Rebend Connection had more bond cracks in slabs faces and spalling in side cover-concrete, even though elastic behavior of the joints was similar to that of the joints with Steel Plate for Re-bar Connection. Consequently, the joints with Rebend Connection had less strengths and deformation capacities than the joints with Steel Plate for Re-bar Connection. In addition, stiffness of the joints with Rebend Connection degraded more rapidly than the other joints as cyclic loads were applied. This may be caused by low elastic modulus of re-straightened rebars and restraightening of kinked bar. For two types of diameters (13mm and 16mm) and two types of grades (SD300 and SD400) of rebars, the joints with Steel Plate for Rebar Connection had higher strength than nominal strength calculated from actual material properties. On the contrary, strengths of the joints with Rebend Connection decreased as bar diameter increased and as grade becames higher. Therefore, Rebend Connection should be used with caution in design and construction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.39-50
• /
• 2001

In proceeding with orthodontic treatment, the prediction for the shape, growth rate and growth direction of mandible plays a major role to set up the treatment plan and determine its period and prognosis. Various approaches being made so far have shown that the linear and angular measurement using lateral cephalograms are relatively accurate to estimate them. This study was purposed to find the shape of mandible more clearly by preventing the overlap of the Condyle head area which appears in lateral cephalogram, and to estimate its growth rate by comparing the growth quantity and ratio via lateral area measurement. This experimental was performed against 40 patients total, of which Class I of 14, Class II of 9 and Class III of 17 consist. Wide open lateral cephalograms of 40 patients were taken over average period of 4 Year 3 Months, then the linear and angular measurements were carried out with 11 itemized lists. Autocad Rl4 application program was utilized to draw their appearance, measure and compare their lateral area. As a result of study, conclusions were made as follows; 1. Mandibular body length (gonion-menton) tended to increase in order of CIII, CI and CII, and Mandibular body length of CIII group had a tendency to grow twice faster than that of CII group. 2. In lateral items such as Go-Me, A-Cd, B-Cp, E-F and G-H, CIII showed a significant increase on the year-average quantity and rate of the growth, and especially apparent difference was observed in CIII group rather than CII group. 3. For the 4 Year 3 Months period, the year-average growth quantity of lateral area of the mandible was $1.0cm^2$ for Class I, $0.8cm^2$ for Class II and $1.4cm^2$ for Class III, which corresponds to $11.9\%,\;11.8\%\;and\;20.3\%$ of growth ratio respectively. Thus, growth ratio almost 2 times more than other groups was observed in group CIII while growth ratio between group CI and CII has little difference. 4. Considering the results as above, it can be proposed that the difference in size of the mandible between groups is caused by the difference in the growth rate and growth quantity of the mandible, which generated in the middle of growth, rather than the difference in size of congenital Jaw-bone.