• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.19-27
• /
• 2017

The effects of changes in area and location of fire source, fire growth rate, and volume of compartment on the major fire characteristics, including heat release rate, in closed compartment fires were examined. To this end, a fire simulation using Fire Dynamics Simulator (FDS) was performed for ISO 9705 room with a closed opening. As main result, it was found that the changes in the area and location of fire source did not significantly affect the thermal and chemical characteristics inside the compartment, such as maximum heat release rate, total heat release, maximum temperature at upper layeras well as species concentrations. However, increasinthe fire growth rate and volume of compartment resulted in increase of the maximum heat release rate and total heat release, decrease in the limiting oxygen concentration and increase in the maximum CO concentration. Finally, a methodology for the application of fire growth curves to closed compartment fires was proposed by deriving the correlation of the maximum heat release rate expressed as a function of the fire growth rate and the volume ratio of compartment based on the ISO 9705 room.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.13-24
• /
• 2008

Real-time traffic data are readily obtainable by traffic surveillance systems of intelligent transportation systems (ITS). Such data greatly support further applications in the field of traffic operations, planning, and safety. However, traffic data should be appropriately processed to fully exploit the benefits of data collection capability. Rather than developing individual data processing techniques, which is major concern of existing studies, this study proposes a novel methodology for evaluating data processing techniques in an integrated manner. Also, a tool for implementing the proposed methodology is developed. Users can extract useful and more reliable traffic data based upon their ultimate purpose of data usage by the evaluation tool developed in this study. Actual freeway traffic data are, as an example, fed into the evaluation tool, and results are discussed.

• Journal of Yeungnam Medical Science
• /
• v.7 no.1
• /
• pp.203-210
• /
• 1990

This is a case report of correction of malunioned maxilla after traffic accident by Le Fort I osteotomy and posterior segmental osteotomy. By this procedure, authors obtained the following results. 1. The malinioned maxilla after traffic accident which had anterior crossbite, posterior open bite and scissor's bite were corrected by Le Fort I osteotomy and posterior segmental osteotomy. 2. No postoperative infection and specific complication were seen in this case. 3. Postoperative intermaxillary fixation was maintained for 8 weeks. And then, the patient could open his mouth in normal range after a week of intermaxillary fixation removal. 4. For rigid fixation and reducing relapse, the osteotomized maxilla was fixed with miniplates.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.167-175
• /
• 1999

So far, the remote sensing technology has widely been used in a variety of application areas such as military, medical imaging, environment, geology and so forth. The microwave remote sensing uses the wavelengths ranging from around one centimeter up to a few tens of centimeters and is known to be very effective regardless of the weather conditions and the day/night time as compared with the reflective InfraRed (IR) remote sensing or the thermal IR remote sensing. There are three generic modes of synthetic aperture radar imaging systems depending on its application, that is, stripmap mode, spotlight mode, or inverse mode. In this article we focus on the issue of imaging of flying aircrafts for the inverse mode of a ground - based, fixed radar with moving objects. The imaging of flying aircrafts is considered to be an important step for the automatic target recognition systems, and therefore a great deal of efforts have recently been made on the subject. Here we review the three representative methods including the Fourier transform processing, the time - frequency processing, and the reconstruction from the projection. Some relative merits and drawbacks are also discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.8-8
• /
• 2017

본 연구는 원주천 16 km 구간을 대상으로 안정하도 설계에 따른 하상의 변동과 그에 따른 물리적 생물학적 교란 영향을 분석하였다. 안정하도 설계를 위한 방법으로 구간별 안정경사관계곡선을 도출하였으며, 현재 하도의 구간별 경사와 비교하여 안정/불안정을 판단하였다. 원주천 대상구간은 총 20개구간 중 17개 구간이 안정한 하상경사로 나타났으며, 하류부 2개 지점과 상류부 1개 지점에서 불안정 경사로 나타났다. 불안정 구간의 안정하도 설계를 위한 방법으로는 하천시설물의 도입을 통한 하상변동의 유도로 안정경사를 설계하는 방법과 하도의 준설과 하상보호공의 설치에 따른 안정경사 설계 방법을 이용하였다. 하천시설물의 도입을 통한 안정하도 설계의 경우 2개의 구간에서 추가적인 안정하도의 설계로 총 19개 구간이 안정하도로 설계되었으며, 하도의 준설과 하상보호공의 설치에 따른 안정하도 설계의 경우 20개 구간 전부에서 안정경사로 설계되었다. 아울러 안정하도 설계에 따른 하천의 물리적 생물학적 교란 양상을 분석하기 위해 물리적 교란개선 평가 결과와 물리서식처의 변화를 분석하였다. PHABSIM 모형을 이용하여 원주천의 최우점종인 참갈겨니를 대상으로 평수량에 대한 서식적합도 (HS, habitat suitability)와 가중가용면적 (WUA, weighted usable area)의 변화를 분석하였다. 현재 상태와 5년의 하상변동 모의 후의 평가 분석결과를 하천시설물 도입과 하도의 준설에 따른 5년경과 후의 예측평가 결과와 비교 분석하였다. 하천시설물의 도입에 따른 안정하도 설계의 경우 물리적 교란개선 평가 결과는 현재상태보다 소폭 개선되었으며, 물리서식처는 현재상태 보다는 감소하나, 현재의 5년경과 후와 유사하게 나타났다. 하도준설과 하상보호공의 설치에 따른 안정하도 설계의 경우 물리적 교란개선 평가 결과는 미약하게 감소하였다. 물리서식처는 현재상태와 유사하게 나타났으며, 현재의 5년경과 후 보다는 증가하는 것으로 나타났다. 따라서 안정하도 평가와 물리적 교란개선 평가 및 물리서식처 분석을 통한 하천의 안정성과 건강성 증대 방안을 도출하였다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.432-438
• /
• 2019

Accurate impression taking for the success of implant prosthesis is a very important process. Methods of taking implant impression include the conventional method using impression coping and impression material, and the digital method using an intraoral scanner and scanbody. However, the impression coping or the scanbody must install after remove healing abutment. Because of this, the dentist must repeat the process of removing and installing the healing abutment, the impression coping or the scanbody several times. In addition, the impression coping or the scanbody rises higher than the occlusal surface, so the patient has the inconvenience of constantly maintaining the open state. Recently, a scannable healing abutment, which can be scanned by a intraoral scanner directly, without the need to remove the healing abutment by applying a scannable part of the scanbody to the healing abutment, was introduced. We present a case of single posterior implant prosthesis using a scannable healing abutment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.464-464
• /
• 2018

최근 풍수해 현황 분석(국민안전처, 2016)에서는 2003년 이후 태풍 루사와 매미와 같은 대형태풍이 최근에 발생하지 않아 대부분 하천급류로 인한 인명피해가 대부분이라고 언급하였다. 최근 풍수해로 인한 피해가 발생하지는 않았지만 호우/태풍이 발생할 경우 인명보호와 불편해소를 최우선에 두고 각종 정책들을 선제적으로 추진하고 있어 홍수범람발생 예상지역에 대한 인명피해 분석은 반드시 필요하다고 판단된다. 최근들어 인명피해를 평가하는 기술은 피해자료로부터 비교적 간단히 분석되는 경험적 방법에서 2차원 동적 수리모형과 연계, 그리고 정밀한 인구, 건물 등의 자료를 활용하여 대피율, 사전경보 등 인명피해에 영향을 미치는 다양한 요소를 복합적으로 고려하고 개념적이고 기계적 방법으로 발전하는 추세이다. 우리나라의 경우 인명피해 평가와 관련한 연구사례가 거의 전무한 상태이고, 치수경제성분석에서 제시하는 침수면적에 기반한 간략한 방법만이 실무에서 활용되고 있다. 최근 국외에서 제시한 접근방법은 본 연구에서의 개발하고자 하는 목적과 방향에 부합하지 않다고 판단되며, 국내 실정을 고려할 때 주요 영향인자를 추가하고, 특히 노출인구, 인명 인벤토리의 해상도를 높이는 데 주안점을 두고자 한다. 홍수로 인한 인명피해 발생확률은 사후분석의 일환으로 침수흔적도를 통해 총 2개의 침수구간을 설정한 후 Census data를 활용한 위험인구(Population at Risk, PAR)를 산정한후, NDMS 인명피해 자료를 활용하여 침수구간별 인명피해 발생확률을 제시하였다. 여기서 제시한 침수구간의 경우 데이터의 축적정도에 따라 구간을 세밀화 할 수 있는데, 본 연구에서는 총 2개구간(0-1m, 1m 이상)으로 계략화 하여 제시하였다. 본 연구에서는 4개의 지자체의 인명피해 자료를 통해 인명피해 발생확률을 산정하였으며, 해당내용을 시범유역의 빈도별 침수구역도에 적용하여 인명피해 발생을 분석하였다. 해당 연구결과의 경우 인명피해에 대한 명확한 결과를 유추하는데에는 한계가 있지만, 인명피해에 기반한 해당지역의 장래피해규모를 예측하는 데에는 기초가 될 수 있을 것으로 판단된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.459-468
• /
• 2021

In patients with myasthenia gravis, it is difficult to manufacture and maintain dentures because the muscles and nervous system in the oral cavity are not properly adjusted. In addition, excessively extended or thick dentures may cause muscle weakness by stimulating the muscles, so dentures should be manufactured in consideration of this. In this case, a denture was fabricated using the closed mouth technique in a patient with myasthenia gravis with mouth opening limitation. Using the closed mouth technique, the patient's masticatory pressure and muscle movements were reproduced and denture with good retention were manufactured.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.508-514
• /
• 2021

In this report, Replicated denture was fabricated by 3d printing after scanning the existing denture. It was used as an individual tray in closed-mouth technique. It reduced laboratory process and clinical time. Also it helped in facial evaluation and tooth arrangement. Compared to open-mouth technique, the number of visits was reduced, and the patient's adaptability to new denture was enhanced by utilized various information of the existing denture, including vertical dimension.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.141-147
• /
• 2019

In this paper, a beam pattern performance analysis was performed according to number of array elements and spacing of the phase array antenna. The distance between array elements in an array structure design was reduced due to the electrical length of Ka-band, which increases the number of array elements in applying the aperture. If the number of elements reduce by widening the array distance, the grating lobes of the same size as the main beam will occur in visible region. If the number of array elements should be applied to a system where the number of array elements should be minimized, the analysis was performed on a plan to reduce the number of array elements and minimize degradation of performance, such as beam width and side lobe level.