• The Journal of the Korean dental association
• /
• v.46 no.4
• /
• pp.232-242
• /
• 2008

관절잡음의 발생은 측두하악 관절의 구조적, 기능적 이상의 징후로 여겨져왔다. 이러한 관절잡음을 평가하는데 electrovibratography가 비침습적이고 신뢰할만한 방법으로 제시되어 왔으며 이를 통해 관절잡음의 진동수와 진폭 및 전체 에너지 양상을 숫자화하고 도식화 하는 것이 가능하게 되었다. 기존의 연구에서 여러 가지 관절잡음의 양적, 질적 분석이 시도되어 왔다. 이번 연구의 목적은 관절 잡음이 도식화되어 나타나는 frequency spectrum pattern을 integral>300Hz/<300Hz ratio와 함께 분석하는 것이다. 본 실험에서는 Joint Vibration AnalysisTM를 사용하여 측두하악 관절 장애의 증상이 없는 10명의 대조군과 관절 잡음과 동통이 있으나 개구제한을 보이지 않는 정복성 관절원판 변위의 범주에 있는 20명의 실험군에서 관절진동을 분석하였으며 관절진동 기록 시에 Jaw tracker를 함께 사용하여 개폐구시 관절잡음 발생의 위치를 감별하고 치아접촉음을 배제하여 관절잡음을 분석하였다. 그 후 실험군을 frequency spectrum pattern에 따라 4가지 하위 그룹으로 나누어 분석하였다. 실험 결과 실험군과 대조군의 하위 그룹 1에서 유사한 frequency spectrum pattern과 ratio범위를 보였으며 실험군의 하위 그룹 2,3,4 에서는 더 불규칙한 에너지 양상을 보이는 frequency spectrum pattern과 더 큰 ratio가 관찰 되었다. 이번 연구를 통해 Joint Vibration AnalysisTM가 악관절 진동의 특성을 감별하는데 유용함을 알 수 있었고 Joint Vibration AnalysisTM를 이용한 지속적인 진동 분석이 환자 교육뿐 아니라 성공적인 턱관절 기능이상의 진단과 치료에 유용할 것으로 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.2
• /
• pp.117-126
• /
• 2012

Epidermolysis bullosa (EB) represents a spectrum of conditions that are characterized by blistering and mechanical fragility of the skin. There is genetic heterogeneity and marked variation in clinical phenotypes in the multiple EB disorders. The most recent classification recognizes four major EB grouping and over 30 EB subtypes. The severity of EB ranges from mild to severe skin involvement, and it can be localized or generalized. Oral features include repeated occurrence of blisters, erosions, and scars, which lead to limited mouth opening, ankyloglossia, elimination of buccal vestibule, and increased risk of oral carcinoma. Routine dental care or even normal tooth brushing might cause bullae on the oral mucosa. Occasionally, the clinician will be called upon to treat patients with EB and should therefore be aware of specific treatment modifications. we present a reviews of the literature with a case providing adequate anesthetic and surgical care.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.433-446
• /
• 2005

The purpose of this study was to investigate the sociopsychological factors which might influence the course of the temporomandibular disorders and to develop models for prediction of treatment outcome related to pain, dysfunction and sound. For this study, 268 patients with temporomandibular disorders were selected from the patients presented to department of Oral Medicine, Wonkwang university dental hospital. Chief complaints of these subjects were largely grouped into three categories such as pain, dysfunction and sound, and 10 cm visual analogue scale(VAS) was used to record the state of the three complaints every visit and Treatment Index(VAS TI) was calculated from VAS. All the forty-two items obtained from clinical examination or questionnaire were statistically processed with $SPSS^{(R)}$ windows. The results of this study were as follows: 1. The items showed a difference between male and female subjects were maximum mouth opening, palpation score, jaw jerk during mandibular movement, and sleep disturbance. Among questionnaires such as SRRS, HAD scale and PSQI, the HAD scales showed the most highly significant correlation with the each scale item of the SCL-90R. 2. Among the groups classified by VAS TI, the group with the lowest VAS TI showed the highest VAS score in the start of treatment but showed the lowest score in the end of treatment, without respect to the type of chief complaint. From these results, it is assumed that the active treatment duration for the subjects with lower VAS score in the first visit would be longer than the subjects with higher score with the somewhat poor treatment outcome. 3. With regard to all the three complaints, the items showing significant effect in the model for prediction of treatment outcome were from questionnaire, except one item, maximum mouth opening, which suggest that the sociopsychological factors would be strongly related to development and progress of the symptoms.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.292-295
• /
• 2008

Temporomandibular joint cysts usually occur between the second and fourth decade of life. There is a female predominance to male of approximately 3 to 1. The patients complain of swelling, pain and sometimes decreased mouth opening. Synovial cysts of the temporomandibular joint seem to develop by an increase of intraarticular pressure due to trauma or inflammation which causes capsular herniation. However, if inflammatory synovial cysts develop by an increase of synovial fluid into inflammation tissue in the capsule without capsular herniation, a differential diagnosis should include synovial chondromatosis and synovitis. This is a case report of a synovial cyst developed in a capsule of the temporomandibular joint.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.270-276
• /
• 1999

저자등은 1996년 5월 부터 1999년 4월까지 인하대병원 치과에 악관절 질환을 주소로 내원한 958명의 환자 중 병력, 임상소견, 방사선학적 검사 결과 퇴행성 악관절 질환으로 진단된 68명에서 병록지 상에 기록된 환자의 성별, 나이, 주소, 병력, 현증상, 방사선학적 소견 및 치료방법 등에 관해 검사 후 다음과 같은 결론을 얻었다. 1. 남녀 발병 비율은 1:2로 여성에서 높았다. 2. 발병나이는 20대, 30대. 40대, 10대 순이었다. 3. 병력기간은 2년이상, 6개월이하, 1 - 2년 순이었다. 4. 전 환자에서 악관절 동통을, 44명의 환자에서 관절잡음을, 26명의 환자에서 개구제한을 호소하였다. 5. 그밖에 26명의 환자에서 관절부위에 민감성을, 5명의 환자에서 안면 비대칭을, 또한 개교합, 섬유성 악관절강직의 소견이 각각 2명의 환자에서, 양측성질환의 소견이 4명의 환자에서 관찰되었다. 6. 방사선학적 소견상, 15명 환자의 과두부에서 증식성 재성형소견(progressive remodeling)이, 51명의 환자에서 침식성 재성형소견(regressive or erosive remodeling)이 관찰되었으며, 침식성 재성형 환자 중 11명에서 과두주변부 증식성 재성형소견(peripheral remodeling or marginal lipping)이 관찰되었다. 7. 골증식체(osteophyte) 및 소성체(loose body)의 소견이 각각 2명의 환자에서 관찰되었다. 8. 약물에 의한 보존적 치료방법이 1차로 모든 환자에서 시행되었으며, 이중 12명의 환자는 교합안정장치를 병행하여 치료하였다. 9. 관절강내 스테로이드 주사요법에 의한 치료환자가 2명, 관절원판절제술 및 이개연골 이식술을 동반한 악관절성형술 환자가 각각 1명 및 2명이었다.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.1
• /
• pp.45-53
• /
• 2001

Congenital craniofacial disorders represent approximately 20% of all birth defects, One of these disorders is syngnathia, Congenital fusion of the maxilla and mandible is rare and can present in a wide range of severity from single mucosal band(synechiae) to complete bony fusion(syngnathia), Syngnathia, congenital bony fusion of the mandible and maxilla, is even less common than synechiae, with only 25 cases reported in the literature, Most of them have presented as an incomplete, unilateral fusion, We report a case of unilateral bony fusion of the maxilla, mandible, and zygomatic arch, Details of operative management and follow-up data are presented with review of literature.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.164-170
• /
• 2014

A single near-field sounde source bearing and ranging method based on a independent doublet array is proposed. In the common case of bearing estimation method, unform linear array or uniform circular array are used. It is constrained retaining aperture because of array structure to estimate the distance of the sound source. Recent using independent doublet array sound source's bearing and distance esmtimation method is proposed by wide aperture. It is limited to the case doublets are located on a straight line. In this paper, we generalize the case and estimate the localization of a sound source in the various array structure. The proposed algorithm was verified performance through simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.636-645
• /
• 2017

A scanning radar is exploited widely such as for ground surveillance, disaster rescue, and etc. However, the range resolution is limited by transmitted bandwidth and cross-range resolution is limited by beam width. In this paper, we propose a method for super-resolution radar imaging. If the distribution of reflectivity is sparse, the distribution is called sparse signal. That is, the problem could be formulated as compressive sensing problem. In this paper, 2D super-resolution radar image is generated via reweighted ${\ell}_1-Minimization$. In the simulation results, we compared the images obtained by the proposed method with those of the conventional Orthogonal Matching Pursuit(OMP) and Synthetic Aperture Radar(SAR).

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.116-125
• /
• 2021

A three-dimensional (3D) intraoral scanner, which is one of the major developments in digital dentistry, is widely used in fixed prosthodontics. The application of intraoral scanner is now increasing in removable prosthodontics. Sclerotic change induced by scleroderma causes the limitation of mouth opening and multiple loss of the teeth. Conventional prosthodontic procedures are challenging for patients with this disease. This study showed a case of digital approach to the removable prosthodontic treatment of a patient who had the scleroderma and the consequent microstomia. At the provisional stage, the optical impression of patient's oral structures was digitally obtained. Using a 3D printer, the provisional dentures were fabricated. After extraction of hopeless tooth, the definitive digital impression was taken and the metal frameworks were fabricated, based on the data acquired from the impression. The definitive removable partial dentures were completed and delivered to the patient, who was satisfied with the prostheses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.235-249
• /
• 2011

A new form of I-type PSC bridge girder, which has hole in the web, is proposed in this paper. Three different concepts were combined and implemented in the design. First of all, a girder was precast at a manufacturing plant as divided pieces and assembled at the construction site using post-tensioning method, and the construction period at the site will be reduced dramatically. In this way, the quality of concrete can be assured at the manufacturing factory and concrete curing can be well controlled, and the spliced girder segments can be moved to the construction site without a transportation problem. Secondly, a numerous number of holes was made in the web of the girder. This reduces the self-weight of the girder. But more important thing related to the holes is that about half of the total anchorages can be moved from the girder ends into individual holes. The magnitude of negative moment developed at girder ends will be reduced. Also, since the longitudinal compressive stresses are reduced at ends, thick end diaphragm is not necessary. Thirdly, Prestressing force was introduced into the member through multiple stages. This concept of multi-stage prestressing method overcomes the prestressing force limit restrained by the allowable stresses at each loading stage, and maximizes the magnitude of applicable prestressing force. It makes the girder longer and shallower. Two 50 meter long full scale girders were fabricated and tested. One of them was non-spliced, or monolithic girder, made as one piece from the beginning, and the other one was assembled using post-tensioning method from five pieces of segments. It was found from the result that monolithic and spliced girder show similar load-deflection relationships and crack patterns. Girders satisfied specific girder design specification in flexural strength, deflection, and live load deflection control limit. Both spliced and monolithic holed web post-tensioned girders can be used to achieve span lengths of more than 50m with the girder height of 2 m.