• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.39-47
• /
• 2018

This paper aim to propose and suggest for government to reinvent and re-steering the policy on the 4th industrial revolution in Korea. To do it, this paper annalize the advanced country's policies and hard-data sets from many international research institutes. So this paper emphasized the concept and frame of socio-technical system approach by Geels. According to this approach, this paper can get a conclusion that Korea government has to focus on the roles to solve the big social dilemma with high-tech tools from the 4th industrial revolution. And this paper point out the necessary of increasing the diversity and multidisciplinary in 4th industrial revolution policy of Korean government. These findings of this paper recommend for Korea to redesigns the governance mechanism and legislation platform and to design the future readiness.

• Journal of Sensor Science and Technology
• /
• v.10 no.1
• /
• pp.42-51
• /
• 2001

In this study, the effects of embedded optical fibers on the static properties under tensile load and dynamic properties under fatigue load of composite laminates were investigated by experimental tests and finite element analysis. Based on the results, it can be concluded that the embedded optical fiber sensors do not have significant effects on the structural integrity of the smart composite structures except when the sensors are embedded perpendicular to the adjacent reinforcing fibers under fatigue loading. An intensity-based optical fiber sensor was embedded in the crossply composite laminates to monitor the fatigue damage by detecting the stiffness changes of the laminates. The result of this experiment has shown that the intensity-based optical fiber sensor has large potential to monitor the fatigue damage of composite structures by detecting the stiffness changes of the structures with simple and inexpensive instruments and without complex post-processing of measured signals. In addition, the optical fiber sensor showed good resistance to fatigue loading and wide sensing ranges of stiffness.

• Archives of design research
• /
• no.18
• /
• pp.177-186
• /
• 1996

With the change of patterns and the environment of the national standard of living the prohlem of environmental pollution became increasingly serious. Because of the enormous increase of various kinds of used and (after utilization) useless articles, efforts to save resources as well as the environment and the promotion of reprated utilization and recycling are inavoidable. The recognition of an environmental an health problem, and the desire for nonpollution created a desire for environment-friendly products in order to avoid an environmental consumptionism. Drink vending machines making use of vessels only once are closely related to the environmental problem. It is therefore necessary to develop an ecologically designed vending machine. In this study the backgrounds and concepts of green design, classification, construction and the environment of a drink vending machine arc analyzed. From this st1.rting-point a concept for the design of a drink vending machine is developed by two concepts : Type A (seperated-gathering type) and Type B (recycling type). Then three defferent types of vending-machines arc introduced a wall -adherable type, a center est1.blishable type and a desk top type. The conclusion of the text is threefold. There are needs for an ecological design of vending machines, ergonomIc considerations and a harmonization of the styldapperarance) of the machine and its circumferences.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.101-105
• /
• 2002

FRP(Fiber glass reinforced plastics) is compound with materials, which are created to combine each other materials, of which nature of mechanical and chemical are different. Even though the weight and the thickness are identic, its physical figure of characteristic changes with consisting of lay-up and work situation. It is also a method of creating after manufacturing of mould. It has feature that manufacturing of FRP runs parallel design of material with design of structure simultaneously. The rule of FRP structure is distinguished from the length of a ship and it is hard to catch the feature of structure mechanics due to identical formula and figure used for it regardless of the shape of a ship or the speed. This studying, basing on a small FRP ship, will show te fundamental data needed to design of structure analysing the feature of intensity with direction, the method of Lay-up, and the characteristic of materials of FRP.

• Journal of the Economic Geographical Society of Korea
• /
• v.16 no.4
• /
• pp.551-566
• /
• 2013

This study aims to evaluate the industrial cluster policy implemented in Korea during the last decade or so, examine whether it can still be a valid policy measure in the creative economy regime, and propose policy directions for the future. It is evaluated that the cluster policy has contributed to increasing productivity by improving networks between companies, universities and research centers and thus strengthening innovation infrastructure. The policy, however, by its characteristics of government-domination, failed to develop open-ended and flexible spontaneous clusters. Industrial clusters have the capability to contribute to the virtuous circle of creative economy by enhancing creativity and innovativeness, and subsequently by increasing value-added. In order to maximize these positive effects, a few suggestions are made, including being faithful to the very nature of clusters, e.g. geographical proximity and connectedness, intending clusters with creativity well maintained, orienting toward multi-scalar clusters with a mixture of local and global perspectives, and matching regional and industrial policies with regards to clusters.

• Communications of Mathematical Education
• /
• v.9
• /
• pp.317-325
• /
• 1999

수식에 의한 컴퓨터 그래픽의 입력과 출력에 관한 프로그램의 개발은 수학의 역동화, 인간화, 보편화에 기여하고 있다. 현실적으로 해결해야할 문제와 수식에 의한 해답이 전부인 현재의 수학을 소프트웨어를 활용하여 그래픽 기능을 첨부하면 움직이는 수학을 가시화 할 수 있다. 컴퓨터 프로그램에 의한 수학의 실현은 수학자들 모두의 염원으로 전세계적으로 활발한 연구가 진행되고 이는 것이다. 수학의 원리와 응용성을 가미한 수학적 그래픽의 발전은 새로운 천년을 장식할 새로운 학문분야로 등장하고 있다. 기초과학의 여러 자료를 분석, 검토하여 그래픽으로 조립하는 작업은 수학적 그래픽의 힘으로 가능하며, 실험과 실습의 양상을 바꾸어 놓고 있다. 건축이나 토목 또는 전기전자 학과의 응용수학은 새로운 소프트웨어의 출현으로 컴퓨터 강의로 전환되고 있으며 수학 그 자체로 전산기능을 강화하는 방향으로 개편되고 있다. 수학 교과 내용의 전산 프로그램화와 컴퓨터 활용 수학 학습은 거부할 수 없는 시대적 요구이다. 이 연구에서는 새로운 천년의 시작은 컴퓨터 프로그램에 의한 완성된 그래픽의 연출이라는 시각에서 수식에 의한 컴퓨터 그래픽의 기본 방향을 제시하고 있다. 2차원 평면이나 3차원 공간에 이와 같은 다변수함수의 역할을 구현함으로써 다양한 그래픽을 영상화할 수 있다. 다중화면의 연출, 다단계화면의 조합, 다단계다중화면의 영상화 등은 수학에 의한 애니메이션의 기초가 된다. 평면도형의 기본동작을 화면에 구체화시키는 Table 기능을 실제로 구현한다. 연습과 실행 그리고 재구성을 반복하여 조형미를 갖춘 수학적 그래픽을 실현한다. 수학의 학습에 적용할 가치가 있는 학습조형물을 개발하고, 프로그램의 단순화에 노력한다. 미분기하학의 여러 공식을 이용하여 숨어 있는 그림을 표출하며 미분방정식의 해가 갖는 그래픽의 묘미를 형상화한다. 수식에 의하여 출력된 그래픽의 여러 효과를 응용수학에 활용할 수 있도록 재조립하는 과정을 걸쳐 완성하는데 이 연구의 참된 의미가 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.5-5
• /
• 2017

최근의 하천복원사업은 인위적으로 축소 또는 소실된 하천공간을 지형학적으로 되돌리기 위한 방향과 강이 가진 자연의 역동성의 복원에 주안점을 두고 있다. 최근 국내에서도 하천공간 확보라는 측면에서 구하천 구역을 복원하려는 시도가 이뤄지고 있고 대표적으로 청미천, 함평천, 황구지천 등에서 기존의 제방을 후퇴시키고 과거의 하천공간을 하천으로 되돌려 주었다. 그러나 이러한 시도는 구하도 또는 폐천부지 복원사업의 일환으로 시행되었으며, 복원된 공간규모가 크지 않아 사업의 효과를 크게 장담할 수 없는 현실적인 한계가 있다. 따라서 홍수에 안전하며 자연과 인간이 공존하는 터전으로의 공간복원, 그에 따른 하천생태계의 보전과 복원, 레저와 레크레이션이 가능한 친수공간 조성 등 하천기능의 강화와 융합을 종합적으로 고려한 다차원 하천공간 복원계획과 설계의 절차가 필요하다. 이를 위해서는 먼저 유역기반의 문제점과 그 원인에 대한 인식이 선행되어야 하고 그 해법으로 하천공간 확대의 필요성이 도출되어야 한다. 이후, 하천공간 복원 및 활용과 관련된 기본방향이 설정되며 세부 복원목표가 설정되어야 한다. 복원목적과 목표가 세워진 후, 복원대상지를 선정하고 공간 활용방안이 제시되면, 목표달성 여부 판단을 위한 효과분석이 필요하다. 만약, 기대효과를 달성할 수 없을 것으로 예상된다면 복원목표 재설정 및 복원대상지의 재선정이 필요할 것이다. 이와같이 하천공간 복원사업을 시행함에 있어 간결하고 단계적으로 접근하기 위해 본 연구에서는 다차원 하천공간 복원프레임워크를 개발하여 제시하였다. 제안된 하천공간 복원프레임워크를 통해 하천공간복원으로 인해 영향을 미칠 수 있고 또한 영향을 받을 수 있는 물리, 생물, 사회, 경제 등의 다양한 분야의 구조를 통합한 하나의 방법을 제시함으로서 임시방편 수준의 파괴된 하천복원사업에 변화를 주고 프레임워크를 통해 하천공간복원에 대한 응집력 있는 접근법을 적용하도록 촉진하여 복원사업에 참여하는 사람들 간에 공통의 유대감을 형성하는데 도움이 되고자 한다.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.587-597
• /
• 2019

With the rapid aging of the nation's population and the increasing number of elderly people with difficulties in daily life, the elderly care system was implemented for social solidarity. Structural problems in the long-term care system that emerged after the introduction of the system are demanded, and the problem of functional readjustment between nursing hospitals and facilities is raised due to the lack of continuity of care for the elderly by institutional and salary types. In this study, we set up research problems related to personnel, staff, and services to address the problem and conducted FGI. Research has shown that the number of elderly and recognized people in the region, the number of elderly and elderly patients, needs to be reflected in long-term care demand, the direction of appropriate institutional and manpower supply policies, and the establishment of local government goals and plans to strengthen the long-care institutions. It was revealed that non-medical accident arbitration bodies are needed to apply the cost of food insurance, provide programs through links with relevant institutions, and manage the admission smoothly.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.154-165
• /
• 2015

Common issues in research and policy on cultural heritage can be extracted among Eurasian countries although countries in the region show different colors of policies and studies. Among them one thing peculiar to Central Asian countries is that in general they do not have well delineated laws and regulations on the protection of cultural heritage. It may be because they had no enough time and experience to legislate and implement relevant laws and regulations ever since they got independence. Research on cultural heritage in Central Asian countries is often made in cooperation with foreign institutions. As shown in archaeological excavation projects in Central Asian countries, cooperative projects exceed noncooperative ones in terms of size and longevity. UNESCO, through its projects on the Serial and Transboundary World Heritage Nomination of the Silk Roads in Central Asia, also supports countries in Central Asia and others along the Silk Road in order to facilitate inclusion of their cultural heritages in the Tentative List of the World Heritage. With regard to activities on the protection of cultural heritage, while respective countries in Central Asia have made good efforts, they could not produce effective outcomes due to short of budget and specialized manpower. They have rich resources of cultural and documentary heritage but their registered heritages on the UNESCO's World Heritage List and Memory of the World are under-represented because of short of technology and experience among other things. A new trend in cultural heritage studies that combined cultural heritage with tourism has merged in recent years. While some critics have raised some negative questions, this new fashion became popular and will continue with the support of governments of Silk Road countries. In conclusion, Korean institutions are further encouraged to organize cooperative networks for research and policy with respective Eurasian countries.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.5-34
• /
• 2007

Archaeological Heritage is material testimony of national and regional history, and it is one of the tourist's attractions. So it has very important meaning and identical value for a local residents. Public concern on the heritage site elevate higher day by day. They are willing to use it for a multiful purpose, cultural, educational, and even commercial one. But Archaeological Heritage is fragile, and visitors can impact negatively for protection and management of the authenticity on the heritage site. In this research I try to compare legal and administrative measure for the protection, management, and culturalization of Archaeological Heritage in many countries. And I suppose sustainable and practical strategies for keeping integrity of heritage.