• (The)Study of the Eastern Classic
• /
• no.55
• /
• pp.147-172
• /
• 2014

Kang Jae Eung translated "Sang-bong-lok" of Kang Ho Boo from Korean into Chinese. There is Yeonhaengnok(燕行錄) written in with Korean and Chinese among 500 Yeonhaengnok(燕行錄). Especially it is very rare that is translated from Korean into Chinese. Because of there aspect, it is valuable and worth studying. "Sang-bong-lok" was 3 series by origin, but now we have only 2 series. That is the original text written in Chinese by Kang Ho Boo, a Korean version by Kang Ho Boo, and Chinese translated of Korean version by his descindants Kang Jae Eung. Original text dosen't exists now undiscovered yet. Chinese version "Sang-bong-lok" is distinguished from the other Yeonhaengnok(燕行錄) and classical novel in form and contents. In formal aspect, Chinese version "Sang-bong-lok" describes an industry remarks in prologue. This industry remark describes standard and form of writing. Looking industry remark, you can find that Kang Jae Eung didn't add or subject the sentence of original text and distinguished between his own sentence and original text. This compiling system distinguishing compiler from original writter is rare enough to so that you cannot find it in other Yeonhaengnok(燕行錄). In contents, Kang Jae Eung almost transcribed Korean Yeonhaengnok(燕行錄) without subtraction and added special information to promote the view of Kang Ho Boo. After discription, Kang Jae Eung covered all information and reviewed it and added opinion to it. Kang Jae Eung's conclusion is sometimes same or different from Kang Ho Boo's. Anyway it is worthy of noticing that Kang Jae Eung wrote his opinion after Kang Ho Boo's sentence.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.238-243
• /
• 1994

본 논문에서는 여러가지 형태의 결합부에 적용할 수 있는 일반적인 모델링 기법에 대하여 기술하였다. 기존의 해석방법은 특정한 결합부에만 적용이 가능하고 유한요소해석과 실험이 상호 보완적인 관계를 가진 형태의 해석방법이므로 실험이 불가능한 경우에 대해서는 적용하기 어려운 경우도 있다. 본 논문에서는 별도의 실험을 수행하지 않고 결합부 영역만을 상세하게 유한요소 모델링을 하여서 선택된 자유도에 대한 유연성 행렬(Flexibility Matrix)을 구하여 결합부의 특성을 구하는 일반적 모델링 기법을 제시하였다. 이 방법은 수치적으로 축약할 수 없는 모델-결합부가 접촉면(Contact Surface)을 가지고 있는 구조물을 효과적으로 축약할 수 있는 장점이 있다. 또한 모델링되는 결합부의 경계조건의 영향을 배제할 수 있으며 결합부에 존재하는 비선형성도 적정범위내에서 선형화할 수 있다. 제시한 일반적 모델링 기법을 나사 결합부, 접착제 결합부(Glued Joints), 볼트 결합부에 적용하여 결합부이 특성을 구하였으며 실험을 통하여 제시한 해석방법의 타당성을 검증하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.104-111
• /
• 1999

증기압축식 열펌프시스템은 그림 1에 나타난 바와 같이 증발기에서의 흡열과 응축기의 방열을 냉난방에 이용할 수 있으며, 공기를 열원으로 할 때는 공기 중 저밀도의 에너지를 고밀도의 에너지로 전환하여 이용할 수 있으며 지중 온도의 연중변화가 적은 점을 이용하여 지열을 열원으로 할 때는 공기를 열원으로 할 경우에 필요한 제상 장치(defrost cycle)가 필요 없게 되고, 압축기 부하도 줄어들게 되어 열펌프 수명이 길어지게 되며 경제성을 확보할 수 있을 것으로 기대된다. (중략)

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.275-278
• /
• 2002

In this study, to increase removal efficiency of traditional electrokinetic treatment and to reduce contaminant load of wastewater that discharged through cathode compartment, enhanced electrode compartments were investigated. Hydroxide precipitation near the cathode electrode that encounter during traditional electrokinetic treatment were prevented by enhanced electrokinetic remediation test with newly invented electrode compartment. And heavy metal concentration in wastewater showed 0 ppm thus, additive post-treatment cost were not needed.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.449-450
• /
• 1999

VOCs(volatile organic compounds)는 대기중에서 질소산화물과 함께 광화학반응에 참여하여 인체 및 동식물에 유해한 오존 등 2차 오염물질인 광화학산화물을 형성하는 전구물질로 작용한다. 1998년 8월 미국 EPA에서는 휘발성유기화합물과 지표 부근의 오존 또는 스모그의 발생량을 감소시키기 위해 페인트, 세제 및 살충제의 제조공법에 관한 새로운 규칙을 발표하여 휘발성 용제 사용 규제를 강호하고 있다(과학기술부, 1998).(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.33-38
• /
• 2007

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.495-501
• /
• 2001

In this paper, a new technique which models the joints characteristics through reduction of DOFs of structures with joints using component mode synthesis (CMS) method is proposed. Bolt joints are modeled by mass-spring systems. Also generalized mass and stiffness matrices for this models are introduced. Because bolt joints have influence on eigenvalues of structures, exact eigenvalues from modal test are used. The results show that the behaviors of structures with bolt joints depend to a large extent on the translational DOFs and not on rotational DOFs of mass and stiffness matrices of bolts. Furthermore it is confirmed that lumped mass-spring systems as models of bolt joints are effective models considering the facts that joint characteristics converged to constant values in some iterations and eignevalues from proposed method are in good agreement with ones from modal test.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.46-51
• /
• 2002

In this paper, I proposed a eyebrow detection algorithm in human face, that is important element in facial recognition. The proposed algorithm consists of four processes: face region detection using color region segmentation. eye detection by template matching, eyebrow candidate region detection in detected eye region, and eyebrow detection by thresholding using the modified histogram that gets luminance value in the candidate region. The test results show that the proposed algorithm can detect eyebrow region very effectively in facial image.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.231-233
• /
• 2007

본 논문은 신 발전방식 중 하나인 용융탄산염형 연료전지(Molten Carbonate Fuel Cell, 이하 MCFC) 발전시스템에서 생성된 전력을 계통에 안정적으로 변환, 주입하기 위한 계통연계형 전력변환기를 설계, 제작하고 성능 시험을 수행한 결과이다. 250kW급 MCFC 시스템의 정격 사양 및 스택의 운전 형태를 기반으로 250kW급 전력변환기 구조 및 단위기기를 설계하였고 전력변환기는 크게 DC/DC 컨버터부와 DC/AC 인버터부로 구성된다. 본 논문은 MCFC 발전 시스템에 적용되는 전력변환기(Power Conditioning System, 이하 PCS)를 제작하고 성능을 확인하는데 목적이 있다.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.86-95
• /
• 1998

CAD/CAM program developers have made substantial progress in enabling engineers to design, analyze, visualize, visualize, and simulate the performance of structures and systems. Many researchers, however, agree that there is still a way to go before the existing commercial computer software can be used in ship structural analysis to their full potential as solvers which can identify opportunities to reduce man-hours and cut costs. CAD systems used for these works in ship yards are general-purposed and not custom-tailored for ship structures, which force end-users to do tiresome and routine works. The new preprocessor "MeshGen" announced in this study can load several ship types and user-friendly generate their FE meshes employing the object-oriented approach based on the parametric and top-down design. Also "MeshGen" reduces dramatically the time required to prepare CAD models under window-based environments on desktop personal computers and makes it much easier and faster for end-users to change topology and material properties.