• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.569-573
• /
• 1998

A water soluble polymer, polycondensate of 1-butylamine and epichlorohydrin (PBE), was synthesized by condensation of 1-butylamine and epichlorohydrin. The characteristics of PBE were determined by IR spectroscopy, low angle light scattering measurement, and $\zeta$ potential measurement. Its interactions with colloidal bentonite particles in aqueous medium were also studied. The results of the studies are as follows : PBE is a cationic polyelectrolyte carrying tertiary ammonium ions on its backbone. The average molecular weight of PBE is found to be about 1,600. The adsorption of PBE on the colloidal bentonite particles are well described with Langmuir adsorption isotherm. As the amounts of PBE adsorbed on the bentonite particles increase, the $\zeta$ potential of the particles changes its sign from negative to positive. This inversion of charge confirms that PBE is cationic in nature. The adsorption of PBE onto the bentonite particles was found to occur through cation exchange reaction. It has been shown that PBE has flocculation effects on the colloidal suspension of bentonite. It has also enhanced effects of filtrability on the digested sludge.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1147-1155
• /
• 1996

In the spray drying with rotating wheel atomizer of cheese powder, the relationships among variables were analyzed with Response Surface Methodology in which several independent variables such as total solid content, wheel rotation speed, and outlet temperature influenced dependent variables such as particle diameter, moisture content, bulk density, and viscosity of suspended liquid. Significance and correlation were tested according to central composite design. As a results of analyzing the correlations between independent and dependent variables, particle diameter and moisture content of cheese powder were decreased with increasing wheel rotation speed, and bulk density was decreased with increasing outlet temperature. Viscosity of suspended liquid were increased with increasing wheel rotation speed and total moisture content. In correlation among dependent variables, moisture content was proportional to bulk density, and particle diameter was inversly proportional to moisture content and bulk density.

• Journal of the Korean Magnetics Society
• /
• v.22 no.1
• /
• pp.11-14
• /
• 2012

The composites of expanded graphite oxide and magnetic nanoparticle (Ni and Co) were synthesized by using simple chemical method. From the raw material natural graphite, the expanded graphite was fabricated using sulfuric acid and $1^{st}$ heat treatment at $600^{\circ}C$ for 1 hour. The expanded graphite was changed to expanded graphite oxide by 2nd heat treatment at $1050^{\circ}C$ for 15 sec and chemical oxidation. The expanded graphite oxide/1-methyl-2-pyrrolidone solution reacts with the magnetic nanoparticle to form a magnetic graphite oxide composite. These graphite-based materials were characterized by x-ray diffractometer, Raman spectroscopy, transmission electron microscope, and vibration sample magnetometer. We expect that these results of this paper were become basis research of graphite oxide composite.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.246-253
• /
• 2001

Amino terminated PES-CTBN-PES triblock copolymer was synthesized from PES oligomer and commercial CTBN rubber (CTBN1300$\times$13), and molecular weight of the copolymer was controlled to be 15000 g/mole. The copolymer was utilized to toughen diglycidyl ether of bisphenol-A (DGEBA) epoxy resin which was cured with 4,4'-diaminodi-phenylsulfone (DDS) and subjected to the measurement of thermal properties, fracture toughness ( $K_{IC}$), flexural properties and solvent resistance. The properties were compared with those from the samples modified by CTBN/PES blends. The maximum loading of copolymer into the epoxy resin was 40 wt% without utilizing solvent, at which $K_{IC}$ fracture toughness of 2.21 MPa${\cdot}m^{0.5}$ was obtained without sacrificing flexural properties and chemical resistance. However, the epoxy resin modified with PES/CTBN blend exhibited much lower $K_{IC}$ and flexural properties compared to the epoxy resins toughened by PES-CTBN-PES copolymers.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.148-155
• /
• 2013

The purpose of this study is to clarify the effect of the emulsifier ratio on the properties of the polymer cement mortars based on styrene-butyl acrylate (S/BA) latexes, and to obtain necessary basic data to develop appropriate latexes for cement modifiers. The polymer dispersions for cement modifiers was synthesized using styrene and butyl acrylate. Polymer cement mortars based on S/BA latexes were prepared with various monomer and emulsifier ratios, and their water-cement ratio, air content, flexural and compressive strengths, water absorption and chloride ion penetration were tested. From the test results, the maximum flexural and compressive strengths of polymer cement mortars based on S/BA latexes were obtained at a bound styrene content of 60% and an emulsifier ratio of 6%. Also, the water absorption and chloride ion penetration depth are greatly affected by the polymer-cement ratio rather than the bound styrene and emulsifier content. Accordingly, it is judged that S/BA latexes can be used place of the conventional polymer dispersions of cement modifier.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.114-124
• /
• 2013

To study the effects of structural difference and fatty acid chain length of glyceride, new dispersion agents having various glyceride structures such as mono-, di-, and tri-, were prepared using glycerol extracted from palm oil and fatty acid having various chain length ranges from 12 to 18. These dispersion agents were mixed with the rubber compounds and compared with conventional metal salt dispersion agents. Glyceride dispersion agent provided remarkable improvement in silica dispersion, compared to metal salt fatty acidic one, even though the viscosity of mixtures was relatively high due to low lubricating effect, and this was approved by mechanical properties, wear properties, and Payne effect. Also, the longer in chain length of fatty acid and the smaller in numbers of fatty acid, the dispersity of silica was improved.

• Journal of the Korean Chemical Society
• /
• v.47 no.6
• /
• pp.559-568
• /
• 2003

A procedure based on liquid liquid extraction(LLE)-GC/MS has been developed for the simultaneous analysis of antioxidants and insecticides known as endocrine disrupters. The endocrine disrupters investigated in this study are butylated hydroxy anisole(BHA) and butylated hydroxy toluene(BHT), and the insecticides are allethrin and fenvalerate. The limit of detection(LOD) was 0.071~0.159 ng/ml with RSD of 1.41~5.34% for the standard sample. From water reservior of Han river, Geum river, Nakdong river and Sumjin river, these compounds were not detected. For the synthesized sample, the LOD is 0.051~0.132 ng/ml with RSD of 6.39~13.4%.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.239-244
• /
• 2009

In order to alleviate the cyto-toxicity and improve the poor water solubility of 7-hydroxy-3-methoxycadalene, it was substituted with glucose, a strong hydrophilic and non cyto-toxiccompound, in the C-7 position. The yield of final product was ca. 55.4%. The $IC_{50}$ values of 7-O-${\beta}$-D-glucopyranosyl-3-methoxycadalene against normal lung cell (WI-38 cell line) and human lung cancer cell (A-549 cell line), which is a parameter for determination of cell viability, were measured to $298.2{\mu}m$ and $88.6{\mu}m$, respectively. This result indicates that the pharmaceutical efficiency of the cadalene-glucose derivative targeted to lung cancer cell could be improved more than three times compared to the non derivatized cadalene. In addition, glycosylation of 7-hydroxy-3-methoxycadalene turned its hydrophobic property to more soluble in water.

• Journal of Powder Materials
• /
• v.19 no.3
• /
• pp.210-214
• /
• 2012

Mass production-capable $Li_2MnSiO_4$ powder was synthesized for use as cathode material in state-of-the-art lithium-ion batteries. These batteries are main powder sources for high tech-end digital electronic equipments and electric vehicles in the near future and they must possess high specific capacity and durable charge-discharge characteristics. Amorphous silicone was quite superior to crystalline one as starting material to fabricate silicone oxide with high reactivity between precursors of sol-gel type reaction intermediates. The amorphous silicone starting material also has beneficial effect of efficiently controlling secondary phases, most notably $Li_xSiO_x$. Lastly, carbon was coated on $Li_2MnSiO_4$ powders by using sucrose to afford some improved electrical conductivity. The carbon-coated $Li_2MnSiO_4$ cathode material was further characterized using SEM, XRD, and galvanostatic charge/discharge test method for morphological and electrochemical examinations. Coin cell was subject to 1.5-4.8 V at C/20, where 74 mAh/g was observed during primary discharge cycle.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.361-370
• /
• 2010

The open pore of stone cultural heritage is not expected to have an effect only by consolidation, and it has a drawback that only the internal wall adheres and gets consolidated due to the incrase of liquidity caused by the low viscosity and difference of materials in the case of filling with high molecules synthetic resins. Therefore, this research selected the effective filler for Three-storied Stone Pagoda at the West of Gameunsaji Site through the verification of filling effects of materials using the information about various fillers based on minerals. As the result of filler experiment, got filled with the combination of KSE 500 STE + KSE Filler A${\cdot}$KSE Filler B that is the same as the Member or has very similar properties. The total surface area of the west stone is $252.6m^2$ and the area where the internal opening has been developed is $17.77m^2$(7.03%) requiring a task that fills the internal($24,885m{\ell}$).