• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.373-379
• /
• 2019

AeroMACS spectrum is a national resource internationally allocated by ITU at WRC-07. AeroMACS is an airport broadband mobile communication infrastructure based on WiMAX-based IEEE 802.16e that enables real-time video, graphics, voice, and high-speed data transmission. With the approval of ICAO's development technology standards in 2008, 50 airports in 11 countries have already completed the testing of D-TAXI or A-SMGCS technology using the AeroMACS infrastructure in 2019, starting in the United States in 2009. With many advantages in safety and convenience in terrestrial telecommunications operations, the system is becoming an area of performance improvement for airport operations in accordance with ICAO's ASBU plan. This paper examines the current status of domestic development of AeroMACS and lists service areas applicable to airlines and operators. It also seeks to promote safe and efficient next-generation airport mobile communication system services by presenting feasible partners management in the mobile area and use of aircraft communication systems for active technology development.

• Korean small business review
• /
• v.41 no.3
• /
• pp.95-106
• /
• 2019

The Economic Gab-Jil, where the stronger are forcing the weaker to sacrifice, is not only a serious social problem, but also it exhausts the vitality of the national economy. Especially, the issue of 'cost reduction (CR) of delivery price' in automobile industry, and the issue of 'tolls' and 'retaliating' in the franchise business are becoming more controversial. This paper suggests some measures to rectify the problems by an analysis using a game-theoretic model. One of the ways to change the 'bad equilibrium', where economic Gab-Jil is prevalent, to the 'good equiblium' is to strengthen the bargaining power of the weak by legal and institutional measures. It is also a more market-friendly system that is self-enforcing, where the regulation is automatically enforced by the incentives of the participants, without relying solely on the enforcement power of regulatory or supervisory bodies

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.26-26
• /
• 2020

하천수의 수심을 유지하기 위하여 설치된 콘크리트 취수보 대신 강자갈이나 쇄석을 채움재로 하는 돌망태를 사용하게 되면 토사퇴적으로 인한 건천화나 상, 하류 수생태계 단절과 같은 문제를 어느 정도 감소시킬 수 있을 뿐만 아니라, 자갈접촉산화작용에 의한 수질개선과 공사비 절감 효과 등의 장점이 있다. 그러나 돌망태는 투수성이므로 불투수성인 콘크리트 보다 저류측면에서 불리하다. 콘크리트 취수보에서의 흐름은 보 정점의 형상, 보의 폭, 높이, 그리고 월류수심에 좌우되며, 베르누이 방정식과 연속방정식에 의해 방류량 산정식을 유도하고, 유량계수와 같은 실험상수를 결정하여 방류량을 계산한다. 돌망태 취수보의 흐름은 보의 높이, 보의 길이, 보의 상류수심 외에 채움재의 형상, 입경, 배치상태가 흐름에 영향을 미친다. 따라서 콘크리트 취수보에 적용되었던 기존의 방류량 산정식을 그대로 적용할 수 없다. 돌망태 보의 통과류는 실험상수가 포함된 비선형 수두손실방정식으로 표현할 수 있다. 실험상수는 비표면적의 크기를 의미하는 채움재의 평균동수반경와 관계되며, 평균동수반경은 채움재 입자의 형상으로 부터 구할 수 있다. 따라서 실험을 통하여 채움재 입자의 형상과 크기에 따른 실험상수와 평균동수반경의 관계를 구하면 비선형 수두손실방정식으로부터 통과류의 방류량을 계산할 수 있게 된다. 본 연구는 돌망태 취수보가 대수층함양 원수 공급시설물로서 타당한가를 평가하기 위하여 수행되었다. 콘크리트 취수보의 월류량 계산은 기존의 방류량 산정식을 이용하였으며, 돌망태 취수보는 실험상수와 평균동수반경의 기존관계식을 이용하여 통과류의 방류량을 계산하였다. 이와 같이 계산된 각각의 수심-방류량 관계로 부터 수심을 비교하였다. 동일한 유량조건에서 돌망태 취수보의 상류수심은 콘크리트 취수보보다 작게 계산되었다. 상류수심은 돌망태 채움재 입자의 크기가 작을수록 증가하여, 돌망태 취수보는 채움재의 입자크기가 작을수록 저류성능이 개선됨을 알 수 있었다. 따라서 돌망태 취수보는 채움재의 입경이 작을수록 콘크리트 취수보의 저류수준에 접근할 수 있을 것으로 판단되었다.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.81-85
• /
• 2007

MnTe layers of high crystalline quality were successfully grown on Si(100) : B and Si(111) substrates by molecular beam epitaxy (MBE). Under tellurium-rich condition and the substrate temperature around $400^{\circ}C$, a layer thickness of $700{\AA}$ could be easily obtained with the growth rate of $1.1 {\AA}/s$. We investigated the structural, magnetic and transport properties of MnTe layers by using x-ray diffraction (XRD), superconducting quantum interference device (SQUID) magnetometry, and physical properties measurement system (PPMS). Characterization of MnTe layers on Si(100) : B and Si(111) substrates by XRD revealed a hexagonal structure of polycrystals with lattice parameters, ${\alpha}=4.143{\pm}0.001{\AA}\;and\;c=6.707{\pm}0.001{\AA}$. Investigation of magnetic and transport properties of MnTe films showed anomalies unlike antiferromagnetic powder MnTe. The temperature dependence of the magnetization data taken in zero-field-tooling (ZFC) and field-cooling (FC) conditions indicates three magnetic transitions at around 21, 49, and 210 K as well as the great irreversibility between ZFC and FC magnetization in the films. These anomalies are attributable to a magnetic-elastic coupling in the films. Magnetization measurements indicate ferromagnetic behaviour with hysteresis loops at 5 and 300 K for MnTe polycrystalline film. The coercivity ($H_c$) values at 5 and 300 K are 55 and 44 Oe, respectively. In electro-transport measurements, the temperature dependence of resistivity revealed a noticeable semiconducting behaviours and showed conduction via Mott variable range hopping at low temperatures.

• Journal of the Korean Magnetics Society
• /
• v.15 no.6
• /
• pp.315-319
• /
• 2005

To obtain low switching field ($H_{SW}$) we introduced amorphous ferromagnetic $Co_{70.5}Fe_{4,5}Si_{15}B_{10}$ single and synthetic antiferromagnet (SAF) free layers in magnetic tunnel junctions (MTJs). The switching characteristics for MTJs with structures $Si/SiO_2/Ta$ 45/Ru 9.5/IrMn 10/CoFe 7/AlOx/CoFeSiB 7 or CoFeSiB (t)/Ru 1.0/CoFeSiB (7-t)/Ru 60 (in nm) were investigated and compared to MTJs with $Co_{75}Fe_{25}$ and $Ni_{80}Fe_{20}$ free layers. CoFeSiB showed a lower saturation magnetization of $560 emu/cm^3$ and a higher anisotropy constant of $2800\;erg/cm^3$ than CoFe and NiFe, respectively. An exchange coupling energy ($J_{ex}$) of $-0.003erg/cm^2$ was observed by inserting a 1.0 nm Ru layer in between CoFeSiB layers. In the CoFeSiB single and SAF free layer MTJs, it was frond that the size dependence of the $H_{SW}$ originated from the lower $J_{ex}$ experimentally and by micromagnetic simulation based on the Landau-Lisfschitz-Gilbert equation. The CoFeSiB SAF structures showed lower $H_{SW}$ than that of NiFe, CoFe and CoFeSiB single structures. The CoFeSiB SAF structures were proved to be beneficial far the switching characteristics such as reducing the coercivity and increasing the sensitivity in micrometer to submicrometer-sized elements.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.87-92
• /
• 2019

In this paper, we have verified a low-voltage EM(elasto-magnetic) sensing technique for tensile force management of PSC(prestressed concrete) internal tendon in order to apply the technique to actual construction sites where stable power supply is difficult. From observation of past domestic and overseas PSC structural accident cases, it was found that PS tension is very important to maintain structural stability. In this paper, we have tried to measure the tensile force from a magnetic hysteresis curve through EM sensors according to voltage value by using relation between magnetostriction and stress of ferromagnetic material based on elastic-magnetic theory. For this purpose, EM sensor of double cylindrical coil type was fabricated and tensile force test equipment for PS tendon using hydraulic tensioning device was constructed. The experiment was conducted to confirm relationship between changes of permeability and tensile force from the measurement results of the maximum / minimum voltage amount. The change of magnetic hysteresis curve with magnitude of tensile force was also measured by reducing amount of voltage step by step. As a result, the slope of estimation equation in accordance with magnitude of magnetic field decreases with the voltage reduction. But it was confirmed a similar pattern of change of magnetic permeability for the magnetic hysteresis loop. So, in this study, it is considered that it is possible to manage the tensions of PSC internal tendon using EM sensing technique in low-voltage state.

• Journal of Christian Education in Korea
• /
• v.65
• /
• pp.81-102
• /
• 2021

In church tradition, cultural misappropriation has often legitimized unjust hierarchy rather than to challenge it. Under the rubric of culturalism, Christian Education has served to justify the oppressive system and maintain status quo as well. A feminist theologian, Rebecca Chopp argues that the contemporary Western culture has intensified narcissistic individualism and self-referentiality and has supported the powerful, while forced the marginalized to be silent. Chopp insists that the role, nature, and mission of Christianity is to provide Word and words of emancipatory transformation. She advocates poststructural feminist theology and aims at renewal of the socio-symbolic order in society by criticizing assumptions underneath language, culture and politics. In this study, we will review the interview with an Asian-American couple and disclose the underlying assumptions and hegemony which have contributed to maintain the male domineering system. I suggest that Christian education for emancipatory transformation should encourage the oppressed women to reflect critically the existing order and to restore their own voice through constructive intervention facilitating "plurivociy" and "problem-posing" dialogue. Proclaimation of transformative Word can empower the marginalized people to revision the world alternatives to monotheistic patriarchal modernism.

• International Journal of Highway Engineering
• /
• v.7 no.1 s.23
• /
• pp.11-20
• /
• 2005

This study examined the correlation between mechanical properties and LMS(Large molecular size) of binders in hot-recycled asphalt mixtures. Hot-recycled asphalt mixtures were manufactured by various mixing methods. Laboratory tests including indirect tensile strength, wheel tracking test and Kim test were performed for each recycled mixture. Gel-permeation chromatography (GPC) analysis was performed for the binders coated on virgin and old (RAP) aggregates separately. For the purpose of binder aging analysis, a round-shaped virgin coarse aggregates (13mm gravel) were introduced in recycled mixtures. This makes possible to distinguish the virgin aggregates from RAP aggregates in recycled mixtures for GPC sampling. Results of GPC showed that there was significant difference in aging level between the binder coated on RAP and that of virgin aggregates in the same recycled mixture. Regression analysis was performed to correlate mechanical properties to LMS ratio. Results showed that most of the mechanical properties had relatively good correlation with LMS. This trend agree with LMS increase up to some degree, but fails for further LMS increase.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2005

Nanocrystalline Nd-Fe-B powder was synthesized by a new thermochemical process that combined with past reduction-diffusion process and spray-dry process. In this process, Ca reduction process is vary important due to formation of hard magnetic$Nd_{2}Fe_{14}B$ phase from various oxides by Ca powder. Therefore, the final products are essentially affected a shape, size, and composition etc. of the Ca reduced powders. Ca reduction was performed to way that raw powders just mixed with Ca powder in proper ratio unlike to compress into compact. The powders after mixture-type Ca reduction mainly composited with $Nd_{2}Fe_{14}B$ phase even relativily low reaction temperature ($800^{\circ}C$) and all particle size of powder were distributed less than 1 ${\mu}m$ except for powder after Ca oxides as magnetic properties of powders after cake-type Ca reduction, with the consequence that high magnetic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca ruduction, with the conseqence that high magnatic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca reduction process showed $_iH_c$ = 5.9 kOe, $B_r$ = 5.5 kG, (BH)max = $Nd_{2}Fe_{14}B{\to}Nd_{2}Fe_{17}B$ decomposition by violent exothermic reaction during washing.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.85-96
• /
• 2001

Experimental magnetization-temperature curves for melt-spun ribbons of amorphous alloys (Dy$\_$0.33/Fe$\_$0.67/)$\_$1-x/B$\_$x/(x=0 ,0.05, 0.1, and 0.15) and (Sm$\_$0.33/Fe$\_$0.67/)$\_$1-x/B$\_$x/(x=0, 0.01, 0.02, and 0.03) (in atomic fraction) are fitted with theoretical equations based on the mean field theory in order to calculate exchange couplings between constituent elements as a function of the B content. In the case of the DyFe$_2$-B system, the sign of the exchange coupling between Dy and Fe is negative, indicating that the magnetization direction of Dy is antiparallel to that of Fe. The sign of the other two couplings are positive indicating a parallel alignment. The exchange coupling between Fe ions are greatest, while that between Dy ions is negligible. In the case of the SmFe$_2$B alloys, the sign of all the couplings are positive, indicating ferromagnetic coupling between the spins. The exchange couplings between Fe ions, and Fe and Sm are comparable to each other, but they are much greater than that between Sm ions. The high exchange coupling between Fe and Sm, which is considered to occur indirectly, is rather unexpected, but it is considered to be unique characteristics of amorphous Sm-Fe alloys. In both alloy systems, the exchange coupling between Fe ions increases with increasing B content. and this may be explained by the increase of the Fe-Fe separation with increasing B content. The exchange coupling between Fe and RE also increases with increasing B content. As the B content increases, the magnetization decreases over the whole temperature range, and the Curie temperature also decreases.