• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.89-92
• /
• 2000

Liquid Phase Epitaxy 법을 이용하여 La이 첨가된 YIG(Yitrium Ion Garnet)막을 성장시켰다. X선 회절 분석을 이용하여 La의 첨가량을 변화시키며 제조된 막의 격자상수를 조사한 결과, La의 첨가량이 증가함에 따라 성장된 막의 격자상수도 증가하였으며 Y/La이 20인 경우, 막의 격자상수가 기판으로 사용한 GGG의 격자상수와 일치하였다. VSM(Vibration Sample Magnetometer)를 이용하여 구한 막의 포화자화 값은 La의 첨가량과 관계없이 순수한 YIG의 경우와 같은 값인 1750정도로 거의 일정하였다. FMR(FerroMagnetic Resonance) 측정장치를 이용한 막의 강자성 공명선폭을 측정결과 막의 공명선폭은 La의 첨가량과 관계없이 모든 경우에 순수한 YIG보다 감소하였다. 실험범위내의 La의 첨가에 대해서 기판과의 격자불일치가 순수한 YIG의 경우보다 감소하기 때문이다. La의 첨가량이 많은 조건에서 성장시킨 막은 공명선폭이 크고 두께의 증가에 따라서 선폭이 증가하였으며, YLa가 20과 30일 때 성장시킨 막에서는 공명선폭의 절대값도 작고 두께에 따른 공명선폭의 변화도 관찰되지 않았다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.89-92
• /
• 2000

Liquid Phase Epitaxy 법을 이용하여 La이 첨가된 YIG(Yitrium Ion Garnet)막을 성장시켰다. X선 회절 분석을 이용하여 La의 첨가량을 변화시키며 제조된 막의 격자상수를 조사한 결과, La의 첨가량이 증가함에 따라 성장된 막의 격자상수도 증가하였으며 Y/La이 20인 경우, 막의 격자상수가 기판으로 사용한 GGG의 격자상수와 일치하였다. VSM(Vibration Sample Magnetometer)를 이용하여 구한 막의 포화자화 값은 La의 첨가량과 관계없이 순수한 YIG의 경우와 같은 값인 1750정도로 거의 일정하였다. FMR(Ferro Magnetic Resonance) 측정장치를 이용한 막의 강자성 공명선폭을 측정결과 막의 공명선폭은 La의 첨가량과 관계없이 모든 경우에 순수한 YIG보다 감소하였다. 실험범위내의 La의 첨가에 대해서 기판과의 격자불일치가 순수한 YIG의 경우보다 감소하기 때문이다. La의 첨가량이 많은 조건에서 성장시킨 막은 공명선폭이 크고 두께의 증가에 따라서 선폭이 증가하였으며, Y/La가 20과 30일 때 성장시킨 막에서는 공명선폭의 절대값도 작고 두께에 따른 공명선폭의 변화도 관찰되지 않았다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.05a
• /
• pp.117-119
• /
• 2009

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.302-308
• /
• 2010

In MRI, the Ferromagnetic artifact is generated by the metalization within in which the before inspection removal is impossible and the distortion of an image is brought. The distortion measure according to the steel for each sequence of T1 image and magnetic field intensity are analyzed and minimized method is looked into. We used SIEMENS 1.5T and 3.0T MRI for experiment equipment. First, it places within the Phantom making a metalization(Ti+Al, Stainless, Nitinol) on 1.5T, 3.0T MRI and the T1 weighted image for each Sequence is acquired. The distortion of an image and about adjacent portion change of the metal material were compared through the obtained image, we analyzed. In all metalizations, a distortion was generated and a distortion was few in particularly, and Titanium-Aluminium alloy. And the extent of a distortion was worse image in the Turbo spin Echo. The use of the Titanium-Aluminium alloy the inserted in an internal material of the metalization is recommend. and, equipment of 1.5T the patient inserting a metal in an internal is used in an inspection than equipment of 3.0T. Also, the sequence is suitable when it obtains the optimum T1 weighted image of an impersonate to use the Turbo spin Echo.

• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.60-65
• /
• 2014

We obtained resonance field ($H_{res}$) and linewidth (${\Delta}H_{PP}$) from measured ferromagnetic resonance signal in the functions of polar angle (${\Theta}_H$) in Ni thin film of 240 nm thickness fabricated by electrodeposition method. The angular dependence of $H_{res}$ was well fitted with the calculated ones. We confirmed that the g-factor and effective demagnetization field were 2.18 and 445 emu/cc by the theoretical analysis of the resonance field, respectively. The angular dependence of ${\Delta}H_{PP}$ showed very large values at in-plane direction (${\Theta}_H=90^{\circ}$), which could not explained by the homogenous linewidth due to the Gilbert damping and inhomogeneous linewidth due to the angular variations and magnetization variations by the surface layer. Therefore, we considered the spin wave scattering (two magnon scattering) process in order to analyze the measured inhomogeneous linewidth, which was appeared in thicker film than the critical thickness of 50 nm. The defect medicated spin wave scattering played a key role in the electrodoposited Ni thin film of 240 nm thickness.

• Journal of the Korean Magnetics Society
• /
• v.7 no.3
• /
• pp.129-133
• /
• 1997

To investigate the influence of the Hf concentration and the annealing effect in $Co_{1-x}Hf_x$(X=0.16, 0.24 at.%) systems, ferromagnetic resonance experiments have been carried out. Spin wave resonance spectra for all samples consist of several volume modes and one (or two) surface mode. It is suggested that both surfaces of the film have a perpendicular hard axis to the film plane (negative surface anisotropy). The surface anisotropy $K_{s2}$ at substrate-film interface is varied slowly from -0.07 to -0.32 erg/$\textrm{cm}^2$ and the surface anisotropy $K_{s1}$ at film-air interface is varied from 0.18 to -0.47 erg/ $\textrm{cm}^2$ with increasing annealing temperature in the amorphous $Co_{84}Hf_{16}$ thin films. Also, the surface anisotropy $K_{s2}$ is varied slowly from -0.31 to -0.41 erg/$\textrm{cm}^2$ and the surface anisotropy $K_{s1}$is varied from -0.19 to -0.60 erg/$\textrm{cm}^2$ with increasing annealing temperature in the amporphous $Co_{84}Hf_{16}$ thin films. We conjecture that the variation of surface anisotropy $K_{s1}$ is due to the increase of Co concentration resulted from Hf oxidation for low temperature annealing(150~175 $^{\circ}C$) and the diffusion of Co atoms near the film surfaces for high temperature annealing (200~225 $^{\circ}C$).

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.191-195
• /
• 1997

$Co_{84}Hf_{16}$ (1300$\AA$, 2150$\AA$) thin films were prepared by dc magnetron sputtering method. To investigate the uniaxial anisotrpy of the sample, the saturation and effective magnetization of the thin films were measured by VSM and FMR, respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For 1300$\AA$, 2150$\AA$, the effective magnetization was measured at the temperatures from T=77K to T=300K. The results were analyzed in terms of Bloch's law $M_s(T)=M_s(0)(1BT^{3/2}CT^{5/2}$. The Bloch coefficient B and C were determined by fitting. $M_{eff}(0)$ was obtained by extrapolating $M_{eff}$ to 0 K. From this result, the spinwave stiffness constants D was also determined and the exchange stiffness constants $A_{eff}$ were calculated by Kittel's resonance conditions.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.10a
• /
• pp.90-91
• /
• 2001

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.147-151
• /
• 2009

The saturation magnetization and uniaxial anisotropy constant were obtained from magnetization and torque curves measurement in high resistive CoFeHfO thin film. The measured results were used for the analysis of the microwave complex permeability based on Landau-Lifshitz-Gilbert (LLG) theory. The high resistive CoFeHfO thin films showed very low damping constants of ${\alpha}$ = 0.014. The results are interpreted in terms of various magnetic phase with very low damping constant, which were existing inside the CoFeHfO thin film, through the linewidth analysis of the ferromagnetic resonance signal with magnetic field.

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.968-973
• /
• 1995

In order to investigate the annealing effect for RF magnetron sputtered $Ni_{83}Fe_{17}$ thin films, we have studied the spin wave rehaviors by FMR after annealing the samples at $135^{\circ}C,\;225^{\circ}C$ in air and at $160^{\circ}C,\;220^{\circ}C,\;330^{\circ}C,\;390^{\circ}C\;and\;420^{\circ}C$ in argon gas for one hour respectively. In FMR spectra for the films annealed in argon gas and the assputtered film at perpendicular resonance, only odd numrer spin waves are observed. But even numrer spin waves are observed for the film annealed in air at $225^{\circ}C$ recause of the large difference retween both surface magnetic anisotropy. In the case of the sample annealed at $420^{\circ}C$ in argon gas, the spin waves are shifted toward high field, can due to the increase of saturation magnetization during annealing. The spacings retween the spin wave resonance fields are narrowed rapidly, this is thought that the magnetic homogeneity increased in the film after annealing at high temperature.