• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.385-391
• /
• 2012

The growth of terminal shoots of persimmon (Diospyros kaki) was analyzed during the first two months from the time of bud sprout to understand the dynamics of their early growth. Field-grown, mature 'Fuyu' and 'Nishimurawase' trees were used in a three-year study at two locations in Gyeongnam province. The growth of terminal shoots was most active from late April, about 10 days after foliation, to early May, followed by a gradual decline by late May. The increase in leaf area continued unabated throughout May. The weight of a flower bud increased slowly until early May and rapidly after flowering. Although its extension growth had been ceased by late May, dry weight (DW) of a terminal shoot continued to increase almost linearly throughout May due to shoot thickening and continued growth of leaves and fruits. In late May, the leaves and the stem accounted for more than 60% and less than 20% of total DW of a shoot respectively; fruit proportion increased to 7 to 17% by then. Relative growth rate (RGR) of the terminal shoot was higher than 213 $mg{\cdot}g^{-1}{\cdot}d^{-1}$ in late April, but declined to less than 63 $mg{\cdot}g^{-1}{\cdot}d^{-1}$ in late May. Like the pattern of seasonal changes in RGR, net assimilation rate (NAR) of the shoots decreased from 1.9 to 2 $mg{\cdot}cm^{-2}{\cdot}d^{-1}$ to 0.5 to 0.8 $mg{\cdot}cm^{-2}{\cdot}d^{-1}$. An early-season 'Nishimurawase' did not differ from a late-season 'Fuyu' in RGR and NAR during the first two months of growth. The early growth of the shoots was affected mainly by the reserves redistributed from permanent organs, however, environmental conditions at the time was also involved.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.11-16
• /
• 2004

Purpose: To evaluate the survival rate, local failure rate and patterns of failure, and analyze the prognostic factors affecting local relapse of ductal carcinoma in situ treated with breast conserving surgery and radiotherapy Materials and Methods: From June 1995 to December 2001, 96 patients with ductal carcinoma in situ treated with breast conserving surgery and radiotherapy were retrospectively analyzed. The operations were either local or wide excision in all patients, with an axillary lymph node dissection performed in some patients. Radiation dose to the whole breast was 50.4 Gy, over 5 weeks, with 1.8 Gy daily fractions, with additional doses ($10\~14$ Gy) administered to the primary tumor bed in some patients with close ($\leq$2 mm) or positive resection margin. The median follow-up period was 43 months (range $10\~102$ months). Results: The 5-year local relapse free survival and overall survival rates were 91 and $100\%$ respectively. Local relapse occurred in 6 patients ($6.3\%$). Of the 6 recurrences, one was invasive ductal cell carcinoma. With the exception of one, all patients recurred 2 years after surgery. There was no regional recurrence or distant metastasis. Five patients with local recurrence were salvaged with total mastectomy, and are alive with no evidence of disease. One patient with recurrent invasive ductal cell carcinoma will receive salvage treatment. On analysis of the prognostic factors affecting local relapse, none of the factors among the age, status of resection margin, comedo type and nuclear grade affected local relapse. Operation extent also did not affect local control (p=0.30). In the patients with close resection margin, boost irradiation to the primary tumor bed did not affect local control (p=1.0). Conclusions: The survival rate and local control of the patients with ductal carcinoma in situ treated with breast conserving surgery and radiotherapy were excellent. Close resection margin and boost irradiation to the primary tumor bed did not affect local relapse, but further follow-up with much more patients is needed.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.185-193
• /
• 2015

Ultra high performance concrete (UHPC) has been developed to overcome the low tensile strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.328-332
• /
• 2009

A new malting barley variety, "Oreum", was developed from the a cross between 'Kinuyutaka' and 'Samdobori' at the Honam Agricultural Research Institute (HARI) in 2006. An elite line, YMB2077-2B-24-1-2, was selected in 2003 and designated as 'Milyang132'. It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2004 to 2006, and was released with the name of "Oreum" having high yielding and BaYMV resistance. The average heading and maturing dates of "Oreum" were April 18 and May 24, which were 2 days later than 'Jinyang', a leading variety, at RYT. "Oreum" had longer culm length (75 cm), more spikes per $m^2$ (990), and lighter 1,000 grain weight (35.2 g) than those of 'Jinyang' in paddy field conditions. It was showed resistance to BaYMV at the regions of Naju, Jinju and Milyang but moderate resistance at Iksan. However, the response to other environmental stresses of was similar to 'Jinyang' The yield potential of "Oreum" was about 5.43 MT/ha, 4.93 MT/ha in upland and paddy fields which was about 80%, 35% higher than Jinyang in the regional adaptation yield trials (RYT), respectively. It has good malting quality including high grain assortment, germination capacity ratio, water sensitivity and high the malt production and the extract and short filtration speed than those of 'Jinyang'.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.331-336
• /
• 2018

The aim of the present study was to identify the metabolic changes that have occurred in Hanwoo Native Cow. Analysis of serum metabolites was carried out to investigate relationship of pregnancy rate and feeding systems. Totally, 281 cows were used for grazing and barn feeding. Grazing was carried out for 5 months in the pasture. In barn feeding, concentrate 3.0 Kg(TDN 68%, CP 14%) and rice straw 6 kg(TDN 50%, CP 6.5%) were fed. Artificial insemination(AI) carried out by timed AI procedure. The level of glucose(mg/dl), cholesterol(mg/mL), BUN(mg/dl), AST(U/l), ALT(U/l), and NEFA(uEq/l) were analyzed. In Table 1, barn feeding with 120% group was showed high Cholesterol and BUN levels compared those with 80% feeding group(p<0.05). In Table 2, 60 pregnant cows in grazing herd showed low Cholesterol, AST and NEFA levels compared to 43 non-pregnant cows($149.8{\pm}4.9$, $99.1{\pm}2.6$, $326.7{\pm}15.7$ vs. $165.9{\pm}4.6$, $108.9{\pm}3.2$, $419.2{\pm}32.8$, respectively, p<0.05). In Table 3, 126 grazing feeding cows showed high Glucose, Cholesterol, AST, ALT, and NEFA levels compared to 22 barn feeding cows($84.8{\pm}1.3$, $142.5{\pm}2.5$, $97.7{\pm}2.3$, $34.3{\pm}0.5$, $317.8{\pm}13.6$ vs. $56.0{\pm}1.3$, $128.9{\pm}4.6$, $80.9{\pm}2.0$, $27.1{\pm}0.9$, $160.2{\pm}18.9$, respectively, p<0.05). Further study needed to obtain more accurate level of metabolites in serum for pregnant and non-pregnant cows.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.1
• /
• pp.45-63
• /
• 2019

The number of domestic construction company is expanding every year while the construction workers' exposure to disaster risk is increasing due to technological advancements and popularity of high-rise buildings. In particular, the industry faces greater fatalities and severe large scale accidents because of construction industry characteristics including influx of foreign workers with different language and culture, large number of aged workers, outsourcing, high place work, heavy machine construction. The construction industry is labor-intensive, which is to be completed under given timeline and consists of unique working environment with a lot of night shifts. In addition, when a fixed construction budget is not secured, there is less investment in safety management resulting in poor risk management at the construction site. Taking account that the construction industry has higher accident risk rate and fatality rate, risky and unique working environment, and various labor pool from foreign to aged workers, preemptive safety management through risk factor identification is a mandatory requirement for the construction industry and site. The study analyzes about 8,500 cases of construction accidents that occurred over the past 10 years and identified risk factor by construction industry sector to secure a systematic insight for risk management. Based on interrelation analysis between accident types, work types, original cause materials and assailing materials, there is correlation between each analysis factor and work industry. Especially for work types, there is great correlation between work tasks and industry type. For reinforced concrete and earthwork are among the most frequent types of accidents, and they are not only high in frequency of accidents, but also have a high risk in categories of occurrence.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2019

Pintail (Anas acuta) is the major wintering bird in South Korea and known as a major mediator of the highly pathogenic avian influenza (HPAI). Pintail migrates long distances between Russian Siberia and Korea. This species prefers a rice paddy area as their winter habitat. The purpose of this study is to provide the data necessary for the conservation and management of bird habitats in Korea by understanding the wintering home-range and habitat of pintail in Korea. We captured six pintails using a cannon-net in the winter of 2015 and attached the GPS-mobile phone based telemetry (WT-300) on them to study the wintering home-range and wintering habitat. We analyzed the tracking location data using ArcGIS 9.0 Animal Movement Extension and calculated Kernel Density Estimation (KDE) and Minimum Convex Polygon (MCP). The average home-range in the wintering ground analyzed by MCP was $677.3km^2$ (SD=130.2, n=6) while the maximum and minimum were $847.7km^2$ and $467.5km^2$, respectively. Extents of home-range analyzed by KDE were $194.7km^2$ (KDE 90%), $77.4km^2$ (KDE 70%), and $35.3km^2$ (KDE 50%). The pintails mostly used both sea and paddy field as habitat in the winter season and utilized paddy fields more during the nighttime and than the daytime. We concluded that the home-range and habitat of pintails in the winter could be used as the reference data for the preservation of species, management of habitats, and coping with a breakout of HPAI.