• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.235-235
• /
• 1999

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.171-175
• /
• 2010

This paper presents the experimental results of frost durability characteristics including freezing-thawing and de-icing salt scaling of the concrete for gutter of the road and marine structure. Mixtures were proportioned with the three level of water-binder ratio(W/B) and three binder compositions corresponding to Type I cement with 0%, 30% and 50% GGBS(Ground granulated blast furnace slag) replacement. Also, two different solutions of calcium chloride were used to evaluate their effect on the frost durability resistance. Specially, in case of complex of freezing and thawing with salt and carbonation, the deterioration of concrete surface is evaluated. Test results showed that the BFS30 and BFS50 mixture exhibited higher durability and lower mass loss values than those made with OPC mix and the use of GGBS can be used effectively in terms of economy and frost durability of the concrete to be in complex deterioration. Therefore, the resistance to complex deterioration with freezing-thawing was strongly influenced by the strength and the type of cement.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.729-730
• /
• 2007

선진국의 경우 송전용 애자의 내구성 향상을 위한 새로운 평가 기법을 적용하여 신뢰성을 향상시키는 등 연구가 활발하지만 국산 송전용 애자에 대한 열화요인 진단 및 대체기술은 거의 초기 연구 단계에 불과하다. 따라서, 국내 송전 선로 환경에 따른 송전용 애자의 구성 요소별 장기 열화요인 분석 기술의 부족을 극복할 필요가 있다. 모든 형태의 절연물은 사용 환경에 따라 열화에 따른 품질 저하는 피할 수 없다. 이에따라 초기 설계에서 최종적인 품질 확인 시험까지 적절한 불량 요인을 진단하여 개선 할 수 있는 제조공정과 경년품에 대한 정기적인 열화 시험 평가 등을 통해 송전용 자기애자의 신뢰성을 유지하는 것이 필요하다. 송전용 현수 애자의 수명과 신뢰성을 결정하는 요인은 복합적이며, 적정한 시료수와 통계적 접근 방법을 동원하여 분석하는 것이 최선이다 자기 애자의 수명에 영향을 주는 핵심 인자는 시멘트 및 자기부의 강도 저하로 알려져 있다. 기본적인 단품 성능시험을 실시한 결과, 냉열 및 급준파 특성에 대한 내구성이 문제점으로 도출되었다. 물론 특정 경년품(1989년도 제품)에서 집중적으로 불량이 발생한 것이지만, 이것은 일반적으로 문제가 있는 자기 애자에서 발생하는 전형적인 형태이다. 현재 가장 문제가 되는 것은 급준파 및 내아크 시험과 같이 열적, 기계적 충격에 대한 내구성을 확인하는 열화 평가방법이 요구된다. 본 연구에서는 경년품 및 신품에 대한 냉열 가속, 경년 가속 열화시험 및 급준파 열화시험과 현수 애자의 핵심 소재인 자기의 HRB 경도 특성 시험하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.47-53
• /
• 2012

Bonding strength of Sn-3.0Ag-0.5Cu solder joint due to degradation characteristic of OSP surface finish was investigated, compared with SnPb finish. The thickness variation and degradation mechanism of organic solderability preservative(OSP) coating were also analyzed with the number of reflow process. To analyze the degradation degree of solder joint strength, FR-4 PCB coated with OSP and SnPb were experienced preheat treatment as a function of reflow number from 1st to 6th pass, respectively. After 2012 chip resistors were soldered with Sn-3.0Ag-0.5Cu on the pre-heated PCB, the shear strength of solder joints was measured. The thickness of OSP increased with increase of the number of reflow pass by thermal degradation during the reflow process. It was also observed that the preservation effect of OSP decreased due to OSP degradation which led Cu pad oxidation. The mean shear strength of solder joints formed on the Cu pads finished with OSP and SnPb were 58.1 N and 62.2 N, respectively, through the pre-heating of 6 times. Although OSP was degraded with reflow process, the feasibility of its application was proven.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.05a
• /
• pp.37.2-37.2
• /
• 2008

• Journal of the Korean Ceramic Society
• /
• v.34 no.3
• /
• pp.257-264
• /
• 1997

The aim of this study was to investigate the degradation of piezoelectric properties with compressive cy-clic loading, the change in bending strength before and after poling treatment and fracture strength in MPB depending on the amount of MnO2 addition. The MPB with 0.25 wt.% MnO2 showed the best resistance against the piezoelectric degradation with compressive cyclic loading. Bending strength increased when pol-ing and loading directions are parallel, however decreased when poling and loading directions are per-pendicular each other. Because, during poling treatment, compressive residual stress is generated in the pol-ing direction but tensile residual stress in the perpendicular direction to poling direction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.464-470
• /
• 2010

The integrity of the industrial equipment in use under high temperature and high pressure must be assessed by regularly measuring the degraded mechanical properties during service time. In order to nondestructively monitor the degraded mechanical properties of industrial equipment, a measuring method of the reversible permeability(RP) using surface type probe is presented. The method for measuring the RP is based on that RP is the differential value of hysteresis loop. The RP is exactly the foundation hatmonics induced in a detecting coil measured by lock-in amplifier tuned to a frequency of the alternating perturbing magnetic field. The peak of RP is measured around the coercive force. Steel material used in this work was 12Cr ferritic heat resisting steel. The eleven kinds of samples aged during different times under same temperature ($700^{\circ}C$) were prepared. Peak interval of reversible permeability(PIRP), Vickers hardness, and tensile strength measured for the aged samples decreased abruptly for short aging time (below 500 h), but the change became small at a long aging time. Vickers hardness and tensile strength linearly decreased as RIRP decreased, so the degraded mechanical properties of 12Cr ferritic heat resisting steel could be nondestructively evaluated by measuring RIRP.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.370-372
• /
• 1997

본 논문에서는 철도차량용 견인전동기의 열적, 기계적, 전기적 열화 및 환경열화 등의 절연열화 메카니즘에 대해서 검토하였으며, 전동기 주절연물의 전반적인 열화경향 파악과 국부적열화 검출을 위해 현재 적용되고 있는 절연저항, $tan{\delta}$, 직류성분, 정전용량 판정 및 부분방전 시험 등의 각종 절연진단 시험법과 최종적인 교류전압파괴 강도와의 상관성을 추정하는 진단기술의 현황과 그 유용성을 소개한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.65-73
• /
• 2002

Artificial aging was performed to simulate the microstructural degradation in 2.25Cr-1Mo steel arising from long time exposure at $540^{\circ}C$. Microstructural analysis (mean equivalent size, number of carbides per unit area) and measurement of mechanical properties(UTS, Vickers hardness) and magnetic properties(coercivity, remanence) were performed. By comparing these results, the relationship between magnetic properties and microstructural changes with artificial aging was clarified. The carbides were classified as rod, globular and acicular type in terms of morphology. The fine acicular carbides were found to diminish drastically in the initial stage of aging. The magnetic coercivity and remanence were observed to decrease rapidly in the initial about 920 hours of aging time and then decrease slowly afterwards. Linear correlations between the mechanical properties and magnetic properties such as correlations remanence were found.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.241-246
• /
• 2003

In order to develop a method of corrosion fatigue design and estimate reliability of TMCP steel using as the material of heavy industries and plants, its corrosion susceptibilities, corrosion fatigue strength, and determination of fatigue design criterion considering corrosion degradation were investigated. From the results, the corrosion characteristic of TMCP steel is very susceptible in 3.5wt.% NaCl solution. Its susceptibility was linearly increased with the solution temperature increase. The corrosion fatigue strength in $25${\circ}$, 3.5wt.% NaCl solution is very lower than that of in air. And also, it was decreased with the frequency decrease in the same environment. It is expected that the developed corrosion fatigue design method for TMCP steel is useful. However, it is necessary to verify its reliability for actual application.