• Title/Summary/Keyword: 감압

Search Result 742, Processing Time 0.023 seconds

Numerical Analysis of Proportional Pressure Control Valve using Bondgraph (본드선도를 이용한 비례전자 감압밸브의 수치해석)

  • Yang, K.U.;Hue, J.K.
    • Journal of Power System Engineering
    • /
    • v.12 no.2
    • /
    • pp.62-70
    • /
    • 2008
  • The paper made a description of the method for numerical analysis and modeling of a proportional pressure control valve by bondgraph. The valve is a three port pressure regulator valve, consists of two subsystems; a proportional solenoid and a spool assembly. A purpose of this study is to analysis the dynamic characteristics of the valve using bondgraph method and to verified results that each of parameters has an effect on modeling. It considered the effect which the presence of solenoid, flow coefficient and non-linearity of resistance causes in the valve modeling. In particular, it is analyzed the effect that the solenoid interacted with modeling results and characteristics of the nonlinear resistance through orifice on the supply and discharge side of valve. Thus this paper described method to present nonlinear characteristics by bondgraph modeling method, so that we could know easily result that each parameters has an effect on the modeling.

  • PDF

Afterpolymerization and Depolymerization of Poly-${\varepsilon}$-Caproamide in Molten State (용융상태에서의 Poly-${\varepsilon}$-Caproamide의 후중합과 해중합)

  • Dong-ho Lee;Chang-soo Kim;Tae-oan Ahn
    • Journal of the Korean Chemical Society
    • /
    • v.17 no.1
    • /
    • pp.40-46
    • /
    • 1973
  • The afterpolymerization of nylon 6 was carried out in three different reaction conditions, nitrogen flow, sealing and evacuation. The viscosity and reduced weight of polymer were increased by increasing the reaction time and temperature, and viscosity of polymers at constant reaction temperature was decreased as the following order: nitrogen flow >sealing >evacuation. The activation energy of afterpolymerization was 10.5 kcal/mole.

  • PDF

Changes of sleep during simulated heliox saturation diving at 19 ATA and 24 ATA (19 ATA와 24 ATA에서의 Heliox포화잠수시 수면 변화)

  • 서유진;박영만
    • Proceedings of the ESK Conference
    • /
    • 1998.04a
    • /
    • pp.131-136
    • /
    • 1998
  • 2개의 simulated된 잠수 실험 즉, 심도 19 ATA와 24 ATA의 고압 Heliox 환경하에서, 4명의 다이 버를 대상으로 하여연 188일간 매일 23:00부터 익일7:00시 사이에 각 다이버에대해서 표준적인 polysomnography를 기록했다. 2개의 잠수조건 하에서 양 실험 모두 해저에서 체재하는 동안 의 밤과 감압하는 동안의 밤 동안에는 총수면시간 (Total Sleep Time)의 단축, 수면효율(Sleep Efficiency)의 감소, 입면잠시(Sleep Latency)의 연장, 중도각성회수 (Number of Awakeningss) 와 감소를 보였지만, 어느쪽도 뚜려한 변화가 있었다라고는 할 수 없었다. 24 ATA 잠수조건에서 의 해저에서 체재하는 동안의 밤과 감압하는 동안의 밤 동안에서는 19 ATA 잠수조건에 비해서 4 단계수면(stage 4 sleep )만 유의한 감소를 보였다. 2개의잠수조건 모두 잠수기간 중에 있어서 는 각성하기 쉬운 상황이었으며, 기본적인 수면패턴에 있어서는 큰 변화는 보이지 않았다.

  • PDF

증기주입기 계통 해석 코드 개발

  • 이경진
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05b
    • /
    • pp.126-131
    • /
    • 1996
  • 증기주입기간 고온, 고압의 증기 열에너지를 운동에너지로 전환하여, 저압의 피주입수를 고압의 계통으로 펌핑하는 장치를 말한다. 원자로에서 과도상태나 사고 발생시, 저온 저압의 냉각수를 고온 고압의 계통으로 주입시켜야 되는 상황이 종종 발생한다. 기존 원자로의 경우 먼저 여러 가지 능동적인 수단을 사용하여 계통의 압력을 떨어뜨린 후, 능동기기를 사용하여 냉각수를 주입시킨다. 냉각수를 주입시키기 위해서는 먼저 계통의 압력을 떨어뜨려야 한다. 기존 방식의 단점으로는 감압이 어렵고, 능동기기에 대한 전원 유지가 필수적이며, 능동기기(펌프)의 고장 가능성을 들 수가 있다. 증기주입기는 감압 및 구동력이 필요하지 않고, 움직이는 부분이 없이 노즐과 밸브로만 구성되어 있이, 냉각수 주입계통의 신뢰도를 크게 향상시킬 수 있다. 따라서 광범위한 운전 조건하에서 안정되게 작동할 수 있는 증기주입계통을 개발하기 위한 분석 기법연구 및 분석 코드를 개발하였다.

  • PDF

대용량 피동형원자로의 안전계통 성능 분석

  • 김성오;황영동;정병렬;최철진;정법동;장문희
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05b
    • /
    • pp.423-428
    • /
    • 1996
  • 피동형원자로 AP600을 참조발전소로하여 설정된 1000MWe급 대용량 피동형원자로의 계통개념에 대한 안전계통 성능 평가 및 코드의 적용성 평가를 목적으로 RELAP5/MOD3코드를 사용하여 대형냉각재상실사고를 모의 해석하였다. 피동형 안전계통으로 축압기, CMT IRWST를 모델하였으며 가압기에 연결된 1단계부터 3단계까지의 자동감압밸브계통을 모델링 하고 4단계 자동감압밸브계통은 각 루프의 고온관에 연결되어 있는 것으로 모델링 하였다. 피동형 안전계통의 모델이 향상된 RELAP5/MOD3.2와 그 이전의 코드인 RELAP5/MOD3.1의 냉각재상실사고 모의계산결과 원자로내의 압력변화, 노심냉각수 주입유량 및 핵연료 피복재 온도 거동이 거의 유사하게 나타났으며 1000MWe급 대용량 피동형원자로의 안전계통은 냉각재 상실사고시 충분한 노심냉각능력을 가지는 것으로 분석되었다.

  • PDF

Treatment of Huge Chronic Tuberculous Empyema with Cardiopulmonary Dysfunction -1 case report- (심폐기능의 이상을 초래한 만성 결핵성 농흉의 치료 -1예 보고-)

  • 박준석;최용수;심영목
    • Journal of Chest Surgery
    • /
    • v.37 no.2
    • /
    • pp.188-192
    • /
    • 2004
  • Treatment of huge chronic tuberculous empyema with cardiopulmonary dysfunction. Drainage of empyemal space by closed thoracostomy in chronic tuberculous empyema is generally contraindicated because of the possibility of empyema necessitatis and ascending infection. But in case that serious cardiopulmonary dysfunction is present, drainage of empyema and decompression is necessary. We experienced a case in which chronic tuberculous empyema was big enough to cause mediastinal shifting and cardiopulmonary failure. Immediate drainage of pleural cavity with tube thoracostomy was performed. Afterward, pleuropneumonectomy was done following cyclic irrigation for one month. The patient had successful postoperative course without any evidence of complication or relapse of infection.