• Plant Journal
• /
• v.16 no.4
• /
• pp.26-32
• /
• 2020

The performance monitoring system in the power plant should have the capability to estimate power generation efficiency accurately. Several power generation efficiency models have been proposed for the combined heat and power (CHP) plant which produces both electricity and process steam(or heating energy, hereinafter expressed by process steam only). However, most of the models are not sufficiently accurate due to the wrong evaluation of the process steam value. The study suggests Electricity Conversion Efficiency (ECE) model with determination of the heat rate of process steam using operational data. The suggested method is applied to the design data and the resulted trajectory curve of power generation efficiency meets the data closely with R2 99.91%. This result confirms that ECE model with determination of the model coefficient using the operational data estimate the efficiency so accurately that can be used for performance monitoring of CHP plant.

• Convergence Security Journal
• /
• v.18 no.4
• /
• pp.73-79
• /
• 2018

Since 1910s, the drones were mainly used for military purposes for reconnaissance and attack targets, but they are now being used in various fields such as disaster prevention, exploration, broadcasting, and surveillance of risk areas. As drones are widely used from military to civilian field, hacking into the drones such as radio disturbance, GPS spoofing, hijacking, etc. targeting drones has begun to occur. Recently, the use of drones in hacking into wireless network has been reported. If the artificial intelligence technology is applied to the drones in the military, hacking into unmanned combat system using drones will occur. In addition, a drone with a hacking program may be able to relay a hacking program to the hacking drone located far away, just as a drone serves as a wireless communication station. And the drones will be equipped with a portable GPS jamming device, which will enable signal disturbance to unmanned combat systems. In this paper, we propose security threats and the anticipated hacking scenarios using the drones on the battlespace to know the seriousness of the security threats by hacking drones and prepare for future cyberspace.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.137-142
• /
• 2021

A Photovoltaic power streetlight is a system that uses solar energy to charge a secondary battery and then uses it for night lighting through a lamp, and can be configured as a standalone or grid-connected type by installing an LED streetlight at the load end. The energy generated through the solar cell module can be charged to the secondary battery through the charge/discharge control device, and then the LED street light can be turned on and off by comparing the power generation voltage and the charging voltage according to the monitoring of solar radiation, or by setting a specific time after sunset or sunrise. Based on these contents, this paper designed and manufactured a simulated solar power streetlight for education using new and renewable energy utilization and storage functions. Using these educational equipment, students can 1) understand the flow of energy change using renewable energy including sunlight as electric energy, 2) understand new and renewable energy, and cultivate basic design and manufacturing application power of related products, 3) The use of new and renewable energy through power conversion and strengthening of practical training and analysis through hardware production can be instilled.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.267-281
• /
• 2012

SCADA system is a computer system that monitors and controls the national infrastructure or industrial process including transportation facilities, water treatment and distribution, electrical power transmission and distribution, and gas pipelines. The SCADA system has been operated in a closed network, but it changes to open network as information and communication technology is developed rapidly. As the way of connecting with outside user extends, the possibility of exploitation of vulnerability of SCADA system gets high. The methodology to protect the possible huge damage caused by malicious user should be developed. In this paper, we proposed anomaly detection based intrusion detection methodology by estimating self-similarity of SCADA system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.529-535
• /
• 2020

It is important to secure the driver's external field view in armored vehicles surrounded by iron armor for preparation for the enemy's firepower. For this purpose, a 360 degree rotatable surveillance camera is mounted on the vehicle. In this case, the key idea is to recognize the head of the driver wearing a helmet so that the external camera rotated in exactly the same direction. In this paper, we introduce a method that uses a MEMS-based AHRS sensor and a illuminance sensor to compensate for the disadvantages of the existing optical method and implements it with low cost. The key idea is to set the direction of the camera by using the difference between the Euler angles detected by two sensors mounted on the camera and the helmet, and to adjust the direction with illuminance sensor from time to time to remove the drift error of sensors. The implemented prototype will show the camera's direction matches exactly in driver's one.

• Plant Journal
• /
• v.17 no.4
• /
• pp.53-60
• /
• 2021

The purpose of this study was to develop a portable vibration analyzer that is effective for acquiring and analyzing vibration data of rotating equipment of a power plant and a domestic vibration monitoring system manufacturer Nada Co., Ltd. The hardware of the developed portable vibration analyzer minimizes measurement errors by calibrating the measured values obtained through measurement uncertainty for calibration of the measuring devices in the system, and is composed of a signal processing device with high resolution through high speed data processing. The software structure implements a variety of vibration plots to execute a detailed analysis program, and applies algorithms to measure and remove noise caused by disturbances while operating a rotating machine. The developed product contributed greatly to increase the user's mobility and performance, as well as to reduce the purchase cost due to localization.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.72-78
• /
• 2022

A vacuum brazed cooling passage for an aircraft engine controller was designed. In order to predict the total pressure loss, which is the main design factor of the cooling passage, theoretical and numerical methods for the major loss and the minor loss considering the overall shape of the cooling passage are presented. This design and evaluation method can predict the pressure loss of the complex cooling passage shape for various flow conditions at the initial design step.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.54-57
• /
• 1998

As the physical layer on telecommunication network is replaced fiber optic lines, it is increased the need of systematic maintenance for fiber optic lines. Korea Telecom has developed FLOMS in order to establish maintenance processes for optical fiber lines. FLOMS has functions which manages optical facilities and tests optical fiber lines automatically. As a resuls, this system can check and/or report a fault. Operator, who is reponsible for management of optical fiber lines, can test the characteristics of optical fiber lines remotely using FLOMS. As interpoerable with Digital Transmission Management System, FLOMS provides efficient management for optical fiber lines. This system improves the work process to find fault location fast, detect the degradation of fiber quality, and make database of optical facilities efficiently.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.195-195
• /
• 2023

유기물오염은 호수와 하천에서 가장 흔히 나타나는 오염의 형태이다. 개발도상국에서는 하수처리시설이나 생활용수처리시설에서 유기물이 처리되지 않아 수중의 유기물함량이 증가하여 피해가 나타난다. 물환경보전법에 따라 유기물질을 측정하는 지표에는 BOD, COD, TOC가 있다. 그 중 BOD, COD 측정은 절차가 복잡하고 오래 걸리며, 생물분해가 불가능하거나 유독물질이 존재하는 유기물질인 경우에는 낮은 결과 또는 측정이 불가능하다. 이러한 이유로 환경부에서는 TOC중심관리로 전환되고 있다. 대부분의 수질항목 측정의 경우 현장시료를 채취하여 실험실에서 분석하는 수분석을 이용한다. 하지만 수분석의 경우 인력이 많이 투입되고 분석수가 한정적이며, 정교한 과학 장치를 갖춘 전문 실험실을 필요로 한다. 반면에 TOC는 짧은 시간 내에 측정이 가능하고, 안정적인 산화로 유기물질 총량을 정확하게 측정이 가능하다. 또한 위해성 물질을 발생시키지 않는 친환경적 방법이라 환경오염 감시에 많이 활용된다. 본 연구에서 분광측정기 중 하나인 S-CAN을 통해 하천의 TOC분석을 진행하였다. 대상지는 안동에 위치한 하천실험센터와 금호강 진천천으로 S-CAN측정과 채취한 시료의 수분석 결과를 비교하였다. 이를 통해 TOC측정 및 기기에 대한 정확도분석을 실시하였다. 본 연구를 통해 S-CAN을 활용한 TOC중심의 수질모니터링하여 수질의 특성을 탐구하고, TOC기초연구를 통한 유기물오염도 지표로서 해석할 수 있다. 수분석 자료를 활용한 정확도 비교를 통해 하천 TOC센서 측정 적용에 대한 기초자료 제공과 측정기기의 현장적용성을 판단 할 수 있다. TOC측정 및 분석을 통해 유기물질량을 실시간으로 정확하게 측정하게 되면 수질관리 효율성이 높아지고, 하천에 유입되는 유기물질량과 농도를 정확하게 파악하여 실효성 있는 정책 수립 및 효율적인 수질관리를 할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.447-447
• /
• 2022

하굿둑 실증시험 및 개방 시 하굿둑으로부터 해안지역 대수층의 지하수 내 염분침투를 예방하고 지속가능한 지하수자원 이용과 관리를 위해서 담수(freshwater)와 염수(saltwater)의 경계면 변동 및 분포를 추적하기 위해 지화학적·물리적 접근 연구는 매우 중요하다. 해안 및 하굿둑 주변지역의 담·염수 경계면 특성에 관한 조사 및 분석은 직·간접적 관측방법으로 이뤄진다. 직접 관측방법에는 심도별 전기전도도(Electrical condutivity, EC) 측정 방법으로 1개 정밀센서(CTD-Diver)를 와이어에 연결하여 수동으로 측정하는 방식과 자동 관측센서(CTD-Diver)를 공내 여러 관심심도에 이격거리에 따른 관측센서를 여러 개 설치하여 특정 관심심도별 연속적인 상태를 파악하는 방법이다. 간접 관측방법에는 관심심도별 또는 특정 심도의 지하수 수질을 채취하여 지화학 분석하는 방법이 있다. 직·간접적 관측방법에는 관심심도별 구간의 이격거리와의 공백과 조사시기에 대수층의 해수침투를 파악할 수 있으나 연속적 관측과 예측은 매우 어렵다. 직접적 관측방법 중 1개 정밀센서와 와이어를 이용한 특정 시·공간에 대한 연직 프로파일링 관측은 가능하나, 연속적 관측과 예측 또한 매우 어렵다. 따라서 본 연구는 물리적 방법을 기반으로, 하굿둑 인근의 담수(freshwater)와 염수(saltwater)와의 경계면 분포특성에 관한 연구는 하굿둑 실증시험 시 지하수 내 염분침투에 따른 지하수 환경 등에 대한 전반적 특성 등을 분석하였다. 하구언 일대의 지하수 내 염분침투 및 지하수 오염관리를 위해 실증실험 등 인위적인 요소와 강우, 태풍, 가뭄 등 자연적인 요소에 의해 여러 형태의 분포특성을 보이는 담수와 염수의 분포 및 혼합대의 특성에 따른 담염수의 경계면 형태별 분석을 하는데 목적을 두었다. 해수침투의 예방과 지하수 오염 방지를 위해 심도별 자동 수질측정 장치를 개발하고, 이를 이용한 염지하수의 프로파일링 감시 시스템을 제안하였다.