• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.9-16
• /
• 2010

The purpose of this study is to establish how drivers react on different pavement markings in a driving simulator for speed reduction. For this, forty one people between the ages of twenty and seventy took part in this experiment. A study analyzed which patterns are effective to reduce a speeding. As a results, 'Peripheral Transverse Lines II' were the most effective treatment for reducing driving speeds in the driving simulator. This study carries an important meaning when presenting the effectiveness of speed reduction for perceptual countermeasure based on the human factors. Further research will be required to determine the long term effectiveness of these countermeasures due to concerns over drivers becoming too accustomed to implemented markings. Also, the color contrasts (for example, dark asphalt with white markings) can be considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1C
• /
• pp.67-77
• /
• 2007

Virus throttling technique, one of many early worm detection techniques, detects Internet worm propagation by limiting connect requests within a certain ratio. The typical virus throttling controls the period of rate limiter autonomically by utilizing weighted average delay queue length to reduce connection delay time without hanving a large effect on worm detection time. In the existing virus throttling research, a minimum period of variable rate limiter is fired and a turning point which is a point that the period of rate limiter has been being decreased and starts to be increased is also fixed. However, these two performance factors have different effects on worm detection time and connection delay. In this paper, we analyze the effect of minimum period and turning point of variable rate limiter, and then propose an algorithm which determines values of performance factors by referencing current traffic pattern. Through deep experiments, it is verified that the proposed technique is more efficient in respect of reducing worm detection time and connection delay than the existing virus throttling which fixed the performance factors.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1054-1056
• /
• 2008

최근 전기 철도 시스템에서 높은 속도 제어 성능, 친환경성, 에너지 절약, 탁월한 유지 보수성에 있어서 전기 제동시스템이 주목받고 있다. 전기 제동이라 함은 전기 모터의 힘으로써 차량의 속도를 감속하고, 정지하는 것을 말하는데, 감속을 위해 모터에서 역토크를 발생시킴으로써 모터가 발전기로 동작하게 된다. 이때 감소되는 운동 에너지가 전기 에너지로 변환 되는데, 이 에너지를 회생 에너지라 한다. 특히 전동차에서는 추진시스템이 VVVF 인버터로 바뀌어 가면서 회생 제동이 가능해지게 되었지만, 여전히 몇 가지 문제점이 있다. 이러한 문제점을 해결하기 위해서 많은 연구가 진행되고 있다. 본 논문에서는 회생 제동이 기계 제동에 비해서 뛰어난 점을 분석하고 전기 제동법이 안고 있는 문제점을 언급한다. 또한 이를 보완하기 위한 방안으로서 연구되고 있는 방법을 나열하고 각각의 특성에 대해 살펴본다.

• Korean Journal of Food Science and Technology
• /
• v.14 no.4
• /
• pp.342-349
• /
• 1982

Filefish muscle in the form of thin plate $(5{\times}10{\times}0.4\;cm)$ was dried in a forced air dryer at $47.5^{\circ}C$ to study the relation between dehydration mechanism and water activity. The dryer was designed in such a way that the temperature, relative humidity and velocity of air could be controlled. The whole dehydration process of the filefish muscle was divided into two different drying rate periods, constant and falling rate period. During the constant drying rate period, the drying rate was proportional to the square root of air velocity under the conditions of constant temperature and relative humidity of air. The falling rate period was further divided into two different falling drying rate periods, first and second falling rate period. The first falling rate period was an unsaturated surface drying period caused by partial unsaturation of the drying surface with capillary condensed free water diffused from the internal part of the filefish muscle. At this stage he drying rate was mainly dependent on the relative humidity at constant air temperature, and case-hardening phenomenon started at the end of this stage. The moisture content and the water activity at which the second falling rate period started were not constant, because the drying rate of the first falling rate period was strongly dependent on the air humidity. The second falling rate period was again divided into two drying rate periods, former and latter period. The drying rates of both of these periods were independent on the external air humidity. During the former period of the second falling rate period, the dehydration was proceeded by diffusion and vaporization of capillary condensed free water in filefish muscle. The diffusion coefficient of water was $2.89{\times}10^{-10}m^2/sec\;at\;47.5^{\circ}C$. At this stage, the case-herdening continued until the water activity reduced to 0.7. The latter period of the second falling rate period started at the water activity of 0.45. The dedydration was proceeded by diffusion and vaporization of bound water, which adsorbed in multimolecular layers, through the hardened drying surface. The number of molecular layers was 4, and the diffusion coefficient of water during this stage was $4.38{\times}10^{-11}m^2/sec\;at\;47.5^{\circ}C$.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.564-574
• /
• 2015

As shown by the popularity of the rapid train in the Seoul Metro Line No. 9, the demand for the rapidization of the metro transit has been continuously increased. However, it needs tremendous cost to construct new additional infrastructures to the existing line for the rapidization. In order to overcome the problem, utilizing the existing infrastructures such as crossing tracks as railroad sidetracks can be considered to be a good method of reducing the cost. In this case, there is a way exploiting the existing train as an express train and the advanced train, which increases both acceleration and deceleration, as a local train, but achievable acceleration and deceleration have not been analyzed rigorously. In this paper, we analyze feasible ranges and optimal values of both acceleration and deceleration of the advanced train analytically when we consider the rapidization of the metro transit utilizing the existing infrastructures and verify the results in Seoul Metro Line No. 3. Simulation results show ranges and optimal values of achievable acceleration and deceleration exist when minimum gap between an express train and a local train is smaller than 40 seconds.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.37-45
• /
• 2009

The minimum distance between tunnel and interchange has several steps to go through for road users; when road user comes out of tunnel, he/she reads information on road sign and tries to change the lane, and then reaches the destination (interchange). So that's why that minimum distance between tunnel and interchange has to be designed to reflect human factors sufficiently for road's users. This study aims to set for minimum distance between tunnel and interchange with involved human factors. People aged from their twenties to their seventies took part in this experiment by using driving simulator. As a result, the minimum distance between them was loom long. When it comes to this study for minimum distance between tunnel and interchange, this study will be significant in some ways reason why this method can be applied to all road facilities for road safety on scientific basis. In the near future, It will make a recommendation concerning the most suitable data for road safety by contributing better guideline.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.570-580
• /
• 2015

In the study, planning indicator that should be considered in applying traffic calming technique was derived, and it was intended to analyze the importance of indicator that should most considered in planning traffic calming technique through AHP analysis on the basis of it. The result of planning indicator may be summarized by dividing into road section and crossing section. In road section, hump (0.35) for equipment stimulating reduction of speed, hump image/fort (0.31) for visual control equipment, and slalom type road (0.52) for chicane, and bollard (0.47) for blocking passing route are shown to be the most important and come before anything. In crossing section, signal indicator (0.33) for visual control equipment, rumble strip (0.44) for equipment stimulating reduction of speed, zigzag type road (0.65) for chicane, and blocking going straight at crossing (0.45) for blocking passing route are shown to be the most important and come before anything. The result of the study is judged to be used for basic material in applying traffic calming technique and establishing policy hereafter.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.3
• /
• pp.1-11
• /
• 2000

This study was analysed the characteristis of traveling vehicles using the collected data by DGPS receiver. These data were checked the vehicle position in every 2 seconds and compared with GIS digital map after correcting the errors. These are compared travel speed and running speed overall and analysed the stopping vehicle in the middle of travelling. The stopping frequency, stopping time and stopping factor was analysed. The X, Y coordinates positioning of DGPS received data about stopping vehicle was analysed. DGPS receiver didn't position at first but positioned it exactly as time went. This study carried out the basic study about travel characteristics with digital map and DGPS received data. Few studies which applied advanced technology like GIS & DGPS have been executed. I hope that the more study will be executed in this traffic field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1395-1401
• /
• 2014

In an effort to develop and implement an inertial balance with high performance, the response characteristics of a load cell, which are some of the critical parameters for optimal system design, were evaluated using a sample object of approximately 100 g under microgravity conditions. To this end, a 15-m drop-tower was used to produce microgravity conditions, and the response characteristics of the load cell were investigated in terms of the variations in the magnitude of the deceleration of the sample object, noting that the mass of a living animal should be determined in microgravity. An analysis of the ratio of the inertial forces clearly demonstrated that the average velocity of a load cell plate should be higher than 0.5 m/s to meet the design requirements.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.3 s.234
• /
• pp.356-367
• /
• 2005

The spray characteristics of DISI injector have a great role in gasoline engine efficiency and emission. Thus, many researchers have studied to investigate the spray characteristics of swirl and slit injectors that are used in a DISI engine. In this study, we tried to provide spray parameters, which affect on the spray characteristics such as injection pressure, ambient pressure and ambient temperature. In addition, we calculated $t_{b}\;and\;t_{c}$ to investigate the break up mechanism of test injectors and obtained $C_{v}$ to evaluate the spray characteristics. As the ambient pressure increases in case of slit injector, $C_{v}$ decreases. The laser-induced exciplex fluorescence (LIEF) technique, which is based on spectrally resolved two-color fluorescent emissions, has applied to measure the liquid and vapor phases for on evaporating spray simultaneously. The TMPD/naphthalene proposed by Melton is used as a dophant to detect exciplex signal. The temporal and spatial distribution of liquid and vapor phases during the mixture formation process was measured by this technique. In the LIEF technique, the vapor phase is detected by the monomer fluorescence while the liquid phase is tracked by the exciplex fluorescence. From this experiment, we found that the spray area of the vapor phase is increased with elapsed time after injection and the area of liquid is decreased when the ambient pressure is 0.1MPa. However, the area tends to increase until the end of injection when the ambient pressure is 1.0MPa.