• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.158-158
• /
• 2020

국내외 기상이변으로 인한 하천허용유량의 초과가 많이 일어나고 있다. 이때 사람이 직접 도섭으로 하천의 정보 대한 정보를 취득하기 어렵기 때문에 간접적인 방법으로의 정보취득이 중요시 되어야 한다. 그에 따른 방법으로 주입식의 표면부자를 활용한 방법이나, PIV 기법을 활용한 표면영상유속계측법을 이용한 유속측정방법 등이 있다. 하지만 이런 표면영상유속계측법은 영상의 변위가 커지게 되어 시간간격 설정에 대한 어려움 등이 있고, 표면부자법의 경우 표면 유속을 대변 할 수 있을지에 대한 분석연구가 필요하다. 따라서 이러한 표면 영상 유속계측법과 표면부자의 수표면 유속 측정 능력 등을 분석하여 GPS 전자부자의 활용성을 확인해 보고자 하였다. Lab-Scale 수로에서 GPS전자부자를 입자로 활용하여 주입 후 흘러가는 부분을 영상촬영하고, LS-PIV 기법을 활용하여 분석한 후 검증이 된 전자유속계 (FlowTracker)의 데이터를 참값으로 비교 분석하였다. LS-PIV 기법을 통해서 GPS 전자부자의 표면 유속 측정 능력을 잘 검증해낸다면, 유속측정에 용이하고 접근성 및 안정성까지 확보할 수 있다. 더 나아가 홍수 시 사용뿐만 아니라, ADCP나 ADV로 측정이 불가능한 저수심·저유속의 중소하천에서도 적용할 수 있다. GPS전자부자의 지속적인 연구는 향후 하천 측정 시스템에 많은 도움을 줄 것으로 사료된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.1
• /
• pp.27-32
• /
• 2013

Purpose: The aims of this study were to evaluate the effect of a resin coating on the shear bond strength of indirect composite restoration bonded to dentin with a self adhesive resin cement and to compare the shear bond strength with that of a conventional resin cement. Materials and methods: The occlusal enamels of thirty six extracted noncarious human molars were removed until the dentin flat surfaces of the teeth were exposed. Then, they were divided into 3 groups. The dentin surfaces of group 1 and 3 were left without any conditioning, while the dentin surfaces of group 2 were resin-coated with Clearfil SE bond and a flowable resin composite, Metafil Flo. After all specimens were temporized for 24 hours, indirect composite resin blocks fabricated by Tescera were bonded to dentins by Unicem for group 1 and 2, and by Panavia F for group 3. After 48 hours of water storage, shear bond strengths were measured. The data was analyzed with one-way analysis of variance and multiple comparison test (Tukey method). Results: The shear bond strengths of Unicem applied to resin coated dentin surfaces were significantly higher than those of Unicem and Panavia F used to uncoated dentin surfaces (P<.0001). Conclusion: Application of a resin coating to the dentin surface significantly improved the shear bonding strength of a self adhesive resin cement in indirect restoration.

• Journal of Welding and Joining
• /
• v.3 no.2
• /
• pp.64-73
• /
• 1985

X선응력측정법은 결정의 각자간 거리를 표점으로 하는 각자변형도를 X선회절현상을 이용하여 직접규정하여 응력을 구하는 것이다. 따라서 비교재의 교정곡선으로 부터 간접적으로 응력을 측 정하는 자기법이나 초음파법 등의 비파괴측정법에 비하여 X 선응력측정법은 잔류응력과 같은 내부응력의 비파괴측정법에 알맞고 지금까지 많은 연구자에 의하여 용접부에 적용시키기 위한 시도가 행해졌었다. 앞서 말한 국제회의에서도 X선응력측정법을 취급한 논문이 6편이고 그 가운 데서 3편이 용접구조물 또는 이음부에 이 방법을 적용한 것이다. 그래서 본고에서는 먼저 용접 잔류응력의 발생기구와 계산법, 측정법에 대하여 기술하겠다. 똔 잔류응력이 용접이음부의 파괴 강도 및 용접균열에 미치는 영향, 용접잔류응력의 대책과 이용법에 대하여 일본에서의 연구를 중심으로 소개하겠다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.48-51
• /
• 2011

사장교에서 케이블은 하중을 지지하는 주요 부재로, 케이블 장력은 사장교의 건전성과 안전도 평가에 있어서 매우 중요한 변수이다. 케이블 장력을 추정하기 위한 대표적인 방법으로는 로드셀을 이용한 직접법과 진동 계측 자료를 이용한 간접법 등이 있으며, 최근에는 자기장-응력 관계를 이용한 EM(Elasto-Magnetic) 센서 측정법이 개발되어 케이블 장력 추정에 적용되었다. 본 논문에서는 세 가지 장력 추정 기법을 실제 시공중인 사장교에 적용하여, 그 성능을 상호 비교하였다. 본 연구는 한국의 KAIST와 미국 Northeastern 대학교의 공동연구로 수행되었다. 대상 교량은 부산 화명동과 김해 초정리를 연결하기 위해 현재 건설중인 화명대교이다. 화명대교의 교량 형식은 2주탑 콘크리트 사장교 (주탑 경간장 270m, 총 사장교 구간장 500m)이며, 사장재로는 MS (Multi-Strand) 형 케이블이 사용되었다. 실험 당시 화명대교는 중앙경간의 폐합 후 선형관리를 위한 장력조정작업을 수행하였으며, 케이블 재긴장시의 정확한 장력관리를 위하여 로드셀을 이용한 Lift-off test방법으로 케이블의 장력을 측정하였다. 이와 동시에 두 개의 케이블을 대상으로 진동 가속도 센서와 EM 센서를 설치하고 장력 계측을 수행하였으며, 재긴장 단계별 장력 변화치를 지속적으로 계측하였다. 계측된 결과를 바탕으로 케이블 장력 추정 기법의 정확성 및 실교량에서의 활용성을 비교하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.137-145
• /
• 2010

The mechanical properties of stone structures are generally characterized according to the strength of the stone used. An ultrasonic velocity method that does not damage cultural heritages is used to measure the strength of stone. However, there is no correction involved for surface roughness and thickness of the stone in the ultrasonic method currently used. In addition, a contact agent such as grease can cause contamination on the surface of a cultural heritage. Accordingly, this study suggests an indirect method of strength estimation formula for stone structures based on the surface roughness of the structure, its thickness, and the type of contact agent. (1) Rock strength estimation formula using ultrasonic velocity method of dabbed finish : $f_{su}=30.51\;Vp^{0.82}(R^2=95)$ (2) Rock strength estimation formula using ultrasonic velocity method of harsh finish : $f_{su}=61.52\;Vp^{0.32}(R^2=92)$.

• Journal of Veterinary Clinics
• /
• v.29 no.5
• /
• pp.384-390
• /
• 2012

Echocardiographic measurements of cardiac output, including the modified Simpson's method, Automated Contour Tracking(ACT) method, and left ventricular outflow method are well described methods of evaluating cardiac function due to its reliability and the benefits of its non-invasive technique in human medicine. The purpose of this study was to evaluate the accuracy of an echocardiography estimate of cardiac output in isoflurane-anesthetized beagle dogs and was to compare the ACT method to the other methods used in measurement of cardiac output. In healthy beagle dogs, cardiac output results by echocardiography estimate methods showed an excellent correlations with those by the thermodilution method (The modified Simpson's method : r = 0.815, $r^2=0.665$, y = 0.434x + 0.311 ; ACT method : r = 0.86, $r^2=0.748$, y = 0.391x + 0.242 ; ventricular outflow method : r = 0.691, $r^2=0.478$, y = 0.593x + 0.242). Among the results obtained, the ACT method showed the highest correlation coefficient. In conclusion, our study demonstrated that echocardiography estimate methods did not prove to be suitable in accurately measuring absolute cardiac output values but showed an excellent correlation with thermodilution method. Therefore, by using the measurement of cardiac output as supplemental data, echocardiography estimate methods can be used for detection and correction of hemodynamic disturbances during emergency and anesthesia in veterinary practice.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.2
• /
• pp.143-152
• /
• 2004

Purpose: The purpose of this study is to detect viral coproantigens in children who were hospitalized with acute diarrhea and to compare its association with clinical symptoms. Methods: Seventy-four stool samples were collected from children admitted to Ewha Mokdong Hospital from March 1996 to December 1999. The samples were frozen and analyzed for rotavirus, adenovirus, enterovirus, astrovirus, and calicivirus by enzyme immunoassay (EIA) with monoclonal antibody. 53 stool samples were collected from patients with diarrhea (diarrheal group) and 21 stool samples from patients hospitalized for reasons other than diarrhea (control group). Clinical features and laboratory findings were reviewed in both groups. Results: Among 74 stool samples, virus antigens were detected in 60 samples. Of the 60 virus-positive stool samples, 47 enterovirus, 26 rotavirus, 16 adenovirus, 11 astrovirus, and 11 calicivirus antigens were detected by EIA. Of the 60 virus-positive stool samples, 28 samples have one viral antigen, 30 samples have 2 or more viral antigens, and 2 samples showed a simultaneous infection of Salmonella group B and enterovirus. There was no relationship between the detected virus and clinical features. Conclusion: In this study, viral coproantigen and clinical symptoms were not associated. In the future, further larger scale studies are necessary.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.467-480
• /
• 2014

This study was focused on measurement methods for stone cultural heritages by analyzing Ultrasonic (P-wave) velocity variations according to the water content and anisotropy of rocks. As a result of analyzing of rock properties, the water content and saturation degree were rapidly changed at the beginning of drying and then showed exponential curve which their rates of change gradually decreased. However, P-wave velocity and its rate of change maintained constant values after natural drying of 10 hours. Therefore, the ultrasonic measurement for stone cultural heritages should be performed after natural drying of 10 hours considering the weather and moisture conditions. In addition, the highest values of anisotropy coefficient exhibited in granite and limestone, and indirect method was insensitive to anisotropy compared to direct method. However, all rocks remained anisotropy by indirect method. Accordingly, ultrasonic measurement considering various directions is required. The research results will contribute to customized non-destructive testing and precise diagnosis for lithological characteristics of stone cultural heritage.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.92-98
• /
• 2002

End mill is an essential tool to generate complex surface in workpiece and it has been developed with various materials and tool shapes. The most important factor to evaluate the performance of end mill is still the wear characteristics of flank face. In addition to the flank wear, the tool edge roughness generated by the chipping is another important factor in aspects of material property and machinability evaluation and affects the quality of machined surface. Up to now, there is no direct method for measurement of tool edge roughness. In this study, the tool edge roughness of flat end mill is indirectly measured along the axial direction of workpiece. The theoretical equation is derived in consideration of tool geometry. Finally, the optimal conditions to measure the tool edge roughness by the proposed method are presented through the theoretical review and experimental identification.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.377-383
• /
• 2000

급속한 경제 성장에 따른 산업구조의 고도화 및 다양화로 인하여 유기용제는 많은 사업장에서 널리 사용되는 물질의 하나로 종류도 매우 다양해져 400여종 이상이 되며/sup 1)/, 사용량도 매년 10%이상 증가하고 있어 근로자에게 직접 또는 간접적으로 폭로되어 건강에 나쁜 영향을 초래하고 있다. 유기용제에 의한 건강 장해를 예방하기 위해서는 유기용제의 사용 실태파악과 정확한 작업환경측정 및 평가를 통한 작업환경관리가 산업위생학적 견지에서 매우 중요하다고 생각할 수 있다/sup 2)/.(중략)