• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.101-105
• /
• 2011

This paper calculates protection distance to protect WiBro service from ISM(Industrial Scientific Medical) equipment which is used in the same frequency with WiBro. We analyze with a scenario that WiBro receiver is closed to ISM equipment which has interfering power of CISPR(International Special Committee on Radio Interference) 11 limit. As a result, the protection distance of 14 m was calculated by using MCL (Minimum Coupling Loss) for the worst case. And, the protection distance of 10 m was calculated to meet 5 % interference probability below by using MC(Monte Carlo) for statistic analysis in case of a interferer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.95-100
• /
• 2011

This paper analyzes the interference effect of WLAN(Wireless Local Area Network) service on WiBro(Wireless Broadband) service in adjacent frequency band by using Monte Carlo method. For the analysis, we make scenario that WLAN service operates on frequency band of 2401 MHz ~ 2423 MHz and WiBro service operates on frequency band of 698 MHz ~ 704 MHz. In case of WiBro receiver is close to WLAN AP(Access Point), the interference will be increased. So, we calculate the protection distance between WiBro receiver and WLAN AP to meet interference probability of 5 % below and required interference power of WLAN AP to meet interference probability of 5 % below in the case of fixed protection distance. As a result, the protection distance of 60 m and -9.5 dBm of required interference power of WLAN AP at 10 m of the fixed protection distance are analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.19-24
• /
• 2010

This paper analyzes potential interference effect of DTV service on Radio Microphone in adjacent channel. For analysis, we assume that DTV operates on CH 51(692 MHz ~ 698 MHz) and radio microphone operates on CH 52 (698 MHz ~ 704 MHz) according to the Korea Communications Commission policy. Minimum Coupling Loss(MCL) method is used to determine the required protection distance and Monte Carlo method is used to determine guard band to meet interference probability of 0 % below. In conclusions, protection distance of 1.71 km and guard band of 2.4 MHz are required for indoor and protection distance of 18.86 km and guard band of 5.7 MHz are required for outdoor.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.78-83
• /
• 2015

In this paper, when WLAN repeater of satellite communication package system as a novel wireless disaster communication network connected to LTE D2D mobile terminal, we analyzed radio channel interference from WLAN and WPAN system of adjacent same ISM band using Monte-Carlo method. In this study, WLAN cell radius was determined using Extended Hata Model considering practical environment, and simulated physical protection distance and density in the dense-mode to minimize interference from WLAN, Bluetooth, and ZigBee. Simulation results, WLAN repeater can be operated with 15 WLAN interferer over 130m distance, 23 Bluetooth interferer over 100m distance, and with 62 ZigBee interferer over 83m distance.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.63-67
• /
• 2011

This paper analyzes the interference effect of ISM(Industrial Scientific Medical) equipment on WLAN in order to protect WLAN in interference environment which WLAN Station is close to ISM equipment. CISPR(International Special Committee on Radio Interference) radiation limit standard was used for interfering power of ISM equipment. Then, MCL(Minimum Coupling Loss) which is for the worst case and MC(Monte Carlo) which is based on statistic interference probability are used to get protection distance. As a result, the protection distance of 105 m was calculated by using MCL for the worst case. And, the protection distance of 17 m was calculated by using MC for statistic analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1211-1221
• /
• 2012

This paper describes separation distance to protect radiocommunication services from the interference of inductive systems using frequencies below 30 MHz for the co-existence between radiocommunication services and inductive systems. For the analysis, the interference scenario model is proposed between inductive system and radiocommunication services. Then the calculation method of protection distance is suggested by comparing the radiation power of inductive system with the allowable interference level of victim services, radiocommunication services, according to the applied propagation model. Also, the protection distance for protecting radiocommunication services in the 30 MHz below is calculated through the interference analysis from RFID(Radio Frequency IDentification) and PDP(Plasma Display Panel) TV based on the suggested method. The proposed calculation method was adopted as ITU-R recommendation in related with resolution 63 at ITU-R SG(Study Group) 1 meeting in June, 2012. It will be available to use for the protection of radiocommunication services from the interference of wireless power transfer system and power line telecommunication system.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.103-108
• /
• 2011

This paper is related radio interference from inductive system to radio device in home and industrial environment according to increasing the usage of inductive system. In order to analyze interference from magnetic field strength of inductive system, interference model was suggested and explain the method to calculate separation distance by using conversion that from magnetic field strength to magnetic dipole moment based on suggested interference model. Also, scenario that interference occur between inductive system and radio device was shown and the separation distance between inductive system and radio device was calculate with that scenario. The suggested method in this paper will be used to secure the compatibility between inductive system and radio device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.45-48
• /
• 2011

The electrodeless fluorescent lamp is relatively new luminaire and has been known as the high energy saving lamp which has long life and environment-friendly. But these kind of lamps have some risks to cause harmful radio interference unavoidably due to its own inductive characteristics. In this paper we measured the radio disturbance characteristics of the induction lamp with the operating frequency at 250 kHz, and compared the values with the limits of relevant standards. Finally we have estimated the interference protection distance between the induction lamps and some services around their operating frequencies, and considered the desirable future scopes and limits of the applications for these kind of lamps.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.75-82
• /
• 2010

Korea has made a plan to allocate CH 14~CH 51 (470 MHz~698 MHz) for DTV. This paper assumes that DTV operates on CH 51 (692 MHz~698 MHz) and CDMA system operates on CH 52 (698 MHz~704 MHz) in spare band. Minimum Coupling Loss (MCL) method to get protection distance and Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) to get guard band through 5 % interference probability are used. The protection distance is required to be 665.67 km at close frequency offset of 698.625 MHz between DTV transmitter and CDMA Base Station (BS) receiver. The required guard band between DTV transmitter and CDMA Mobile Station (MS) receiver is 5 MHz for the worst case of rural environment. There is no serious impact between CDMA MS transmitter and DTV receiver. The required guard band between CDMA BS transmitter and DTV receiver is 6.25 MHz for the worst case of urban environment. The analysis results may offer a reference and be helpful for considering interference between DTV and other communication systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.133-142
• /
• 2006

This paper suggests an efficient method of protection ratio(PR) calculation and shows some results of point-to-point radio relay system for frequency coordination. The proposed PR can be expressed as a function of C/N of modulation scheme, noise-to-interference ratio(N/I), multiple interference allowance, fade margins of multi-Path and rain attenuation and net filter discrimination. And PR calculation is performed in view of fade margin, modulation scheme, distance, and interference for actual point-to-point radio relay frequency. According to results for 6.2 GHz, 64-QAM and 60 km at BER 10-6, fade margin and co-channel Protection ratio reveal 41.1dB and 74.9 dB, respectively The merit of presented method provides a systematic and easy calculation by means of PR correction factor related with various parameters and can apply the same concept to frequency coordination of millimeter wave radio relay system.